Abstract：
:This study demonstrates the use of optical coherence tomography (OCT) to simultaneously characterize the roughness of the tablet core and coating of pharmaceutical tablets. OCT is a high resolution non-destructive and contactless imaging methodology to characterize structural properties of solid dosage forms. Besides measuring the coating thickness, it also facilitates the analysis of the tablet core and coating roughness. An automated data evaluation algorithm extracts information about coating thickness, as well as tablet core and coating roughness. Samples removed periodically from a pan coating process were investigated, on the basis of thickness and profile maps of the tablet core and coating computed from about 480,000 depth measurements (i.e., 3D data) per sample. This data enables the calculation of the root mean square deviation, the skewness and the kurtosis of the assessed profiles. Analyzing these roughness parameters revealed that, for the given coating formulation, small valleys in the tablet core are filled with coating, whereas coarse features of the tablet core are still visible on the final film-coated tablet. Moreover, the impact of the tablet core roughness on the coating thickness is analyzed by correlating the tablet core profile and the coating thickness map. The presented measurement method and processing could be in the future transferred to in-line OCT measurements, to investigate core and coating roughness during the production of film-coated tablets.
journal_name
Int J Pharmjournal_title
International journal of pharmaceuticsauthors
Markl D,Wahl P,Pichler H,Sacher S,Khinast JGdoi
10.1016/j.ijpharm.2017.12.023subject
Has Abstractpub_date
2018-01-30 00:00:00pages
459-466issue
1eissn
0378-5173issn
1873-3476pii
S0378-5173(17)31166-3journal_volume
536pub_type
杂志文章abstract：:The present study evaluates the effect of L-leucine concentration and operating parameters of a laboratory spray dryer on characteristics of trehalose dry powders, with the goal of optimizing production of these powders for inhaled drug delivery. Trehalose/L-leucine mixtures were spray dried from aqueous solution usin...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2019.03.004
更新日期：2019-05-01 00:00:00
abstract：:This study focuses on evaluating the potential of transferring from a batch process to continuous process for manufacturing of the extended release formulation. Metformin hydrochloride (HCl) was used in the model formulation which was intended to contain the high amount of hydrophilic drug. The effects of barrel tempe...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2017.07.019
更新日期：2017-08-30 00:00:00
abstract：:The increasing tendency to enhance consumer products with added functionality is leading to ever more complex products. Nowadays more and more particulate products are coated to give the product specific functionalities. An appropriate approach is needed to be able to satisfy customer's requirements. In this work, thr...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2009.10.007
更新日期：2010-01-15 00:00:00
abstract：:Composite dispersions of chitosan (CS), a positively charged polymer, and magnesium aluminum silicate (MAS), a negatively charged clay, were prepared and rheology, flocculate size and zeta potential of the CS-MAS dispersions were investigated. High and low molecular weights of CS (HCS and LCS, respectively) were used ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2007.09.038
更新日期：2008-03-03 00:00:00
abstract：BACKGROUND:Pulmonary administration of the antimicrobial drugs colistin sulphomethate and tobramycin has been shown to be effective in slowing down pulmonary deterioration in cystic fibrosis (CF) patients. Both drugs are administered by liquid nebulisation, a technique known to have disadvantages. Dry powder inhalation...
journal_title：International journal of pharmaceutics
pub_type： 临床试验,杂志文章
doi：10.1016/j.ijpharm.2006.11.021
更新日期：2007-04-20 00:00:00
abstract：:Chemically modified tetracyclines (CMTs) have been reported to strongly inhibit proliferation and metastasis of various cancers, but their efficacy is restricted by poor water solubility. In the present study, a hydrophilic 4-dedimethylamino sancycline (CMT-3) loaded nanostructured lipid carrier (CMT-3/NLC) was produc...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2013.04.021
更新日期：2013-06-25 00:00:00
abstract：:We studied skin occlusion effects in vitro and in vivo on local and systemic delivery of ketoprofen across the organ, using the drug in a conventional non-occlusive topical gel (Togal Mobil-Gel), an occlusive tape (Mohrus), and the new targeted analgesic (Diractin), comprising ultradeformable, hydrophilic carriers in ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2008.04.005
更新日期：2008-07-09 00:00:00
abstract：:Gravimetric water sorption experiments were performed to study the crystallization behavior of amorphous spray-dried lactose over a wide range of temperature and humidity conditions. Experiments performed at 25 degrees C between 48 and 60% relative humidity (RH) showed that the onset time to crystallization increased ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2006.01.012
更新日期：2006-04-26 00:00:00
abstract：:In this study, polyethylene glycol (PEG) conjugated melanin nanoparticles (MNPs) were prepared (PEG-MNPs). A model chemotherapy drug, doxorubicin (DOX), was loaded into the PEG-MNPs with varied concentrations (0.125, 0.250, 0.500 mg/mL). TEM images showed that, DOX-PEG-MNPs are spherical-shaped and 15 ± 2.2 nm in diam...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2019.118613
更新日期：2019-10-30 00:00:00
abstract：:To ensure success in the development and manufacturing of nanomedicines requires forces of an interdisciplinary team that combines medicine, engineering, chemistry, biology, material and pharmaceutical areas. Numerous researches in nanotechnology applied to human health are available in the literature. Althought, the ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章,评审
doi：10.1016/j.ijpharm.2020.119214
更新日期：2020-04-30 00:00:00
abstract：:Formulation intervention, through the application of processing technologies, is a requirement for enabling therapy for the vast majority of drugs. Without these enabling technologies, poorly soluble drugs may not achieve therapeutic concentrations in the blood or tissue of interest. Conversely, freely soluble and/or ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章,评审
doi：10.1016/j.ijpharm.2013.04.042
更新日期：2013-06-25 00:00:00
abstract：:Effects of pH and co-solvents on the bio-mimetic artificial membrane permeation assay were investigated to determine the optimal conditions for the prediction of oral absorption. The permeability (P(am)) of 33 structurally diverse drugs to the PC/PE/PS/PI/CHO/1,7-octadiene membrane system (bio-mimetic lipid (BML) memb...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/s0378-5173(01)00845-6
更新日期：2001-10-09 00:00:00
abstract：:The aim of the present work was to find a suitable method for the introduction of thiol functions on the surface of poly(DL-lactic acid) (PLA) nanoparticles. Three different approaches were investigated. The modification of the surface involves the activation of PLA carboxylic acid groups followed by the attack of a n...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/s0378-5173(02)00542-2
更新日期：2003-01-16 00:00:00
abstract：:Cationic solid lipid nanoparticles (CSLNs) with entrapped saquinavir (SQV) were fabricated by microemulsion method. Here, CSLNs were stabilized by polysorbate 80, and the lipid phase contained cationic stearylamine (SA) and dioctadecyldimethyl ammonium bromide (DODAB) and nonionic Compritol 888 ATO (CA) and cacao butt...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2008.08.050
更新日期：2009-01-05 00:00:00
abstract：:Lipid-based formulations can be effective drug delivery systems for poorly water-soluble chemical entities, provided they are designed with careful selection of the excipients, based on their role in the delivery system and in relation to drug properties. The primary factor leading to increased bioavailability is the ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2015.09.009
更新日期：2015-11-10 00:00:00
abstract：:The kinetics of degradation of the new anti-tumor drug, 4-dedimethylamino sancycline (col-3) in aqueous solution at 25oC were investigated by high-pressure liquid chromatography (HPLC) over the pH-range of 2-10. The influences of pH, buffer concentration, light, temperature, and some additives on the degradation rate ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/s0378-5173(98)00417-7
更新日期：1999-04-20 00:00:00
abstract：:Immunogenicity and toxicity of antimicrobial peptide P34 were evaluated in vivo. BALB/c mice were inoculated intraperitoneally with peptide P34 alone and associated with Freund's adjuvant. For acute toxicity testing, different concentrations of the peptide P34 (82.5, 165.0, 247.5 and 330.0mg/kg) were orally administer...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2011.09.020
更新日期：2011-12-12 00:00:00
abstract：:Recently, many people have developed rheumatoid arthritis (RA), and prednisolone (PD) is often used for treatment; however, long use and a large dose of PD can cause toxic side effects. In this study, in order to enhance the therapeutic effects and to suppress the toxic side effects, the conjugate (GC-SP) was prepared...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2011.03.004
更新日期：2011-05-30 00:00:00
abstract：:The influence of different types of release modifiers on the dissolution from solid lipid extrudates was investigated. Diprophylline was extruded together with 45% tristearin and 5% (w/w) of a release modifier to suitable extrudates. Three groups of release modifiers were defined: Hydrocolloids, disintegrants and pore...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2011.04.010
更新日期：2011-06-30 00:00:00
abstract：:Three innovative components (an annular gap spray system, a booster bottom and an outlet filter) have been developed by Innojet Technologies to improve fluid bed technology and to reduce the common interference factors (clogging of nozzles and outlet filters, spray loss, spray drying and fluidized bed heterogeneity). ...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2004.07.051
更新日期：2005-03-03 00:00:00
abstract：:The purpose of the study is to screen the interactions of fourth generation fluoroquinolone-gatifloxacin with efflux pumps, i.e., P-gp, MRP2 and BCRP. Mechanism of gatifloxacin interaction with efflux transporters may explain its acquired resistance. Such clarification may lead to the development of strategies to over...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2010.05.027
更新日期：2010-08-16 00:00:00
abstract：:Liposomes, coated with transferrin (Tf)-coupled polyethylene glycol are considered to be potent carriers for drug delivery to various organs via receptor-mediated endocytosis. Since Tf receptors were ubiquitously expressed in various organs, additional perturbation of the liposomes such as regulation of the size may b...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2004.05.025
更新日期：2004-08-20 00:00:00
abstract：:Coating thickness is the most important attribute of coated pharmaceutical pellets as it directly affects release profiles and stability of the drug. Quality control of the coating process of pharmaceutical pellets is thus of utmost importance for assuring the desired end product characteristics. A visual imaging tech...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2014.04.066
更新日期：2014-08-15 00:00:00
abstract：:An understanding of the action of many drugs requires a knowledge of how the drug reaches the site of action in a cell. A detailed knowledge of the structure and function of cell membranes is often required to understand the transport of drugs across the plasma membrane. To obtain this information proteins must be iso...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章,评审
doi：10.1016/s0378-5173(98)00345-7
更新日期：1999-01-25 00:00:00
abstract：:Biodegradable and biocompatible microspheres represent a promising alternative to conventional adjuvants for anti-tumour vaccination. Focusing on glioma, we developed two poly(D,L-lactide-co-glycolide) (PLGA)-based particulate systems presenting tumour antigens associated with plasma membranes or with cell lysates. Gl...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2005.10.046
更新日期：2006-02-17 00:00:00
abstract：:Topical iodine forms are used for infected and necrotic pressure ulcers. Despite antimicrobial advantages several potential disadvantages were observed with controversial results. To clarify the controversy, the reactivity of povidone-iodine (PI) sugar ointment and cadexomer-iodine (CI) ointment toward biological comp...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2009.01.007
更新日期：2009-05-08 00:00:00
abstract：:The past decade has yielded a significant body of literature discussing approaches for development and discovery collaboration in the pharmaceutical industry. As a result, collaborations between discovery groups and development scientists have increased considerably. The productivity of pharma companies to deliver new...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章,评审
doi：10.1016/j.ijpharm.2011.03.024
更新日期：2011-06-30 00:00:00
abstract：:The purpose of this study was to prepare solid SMEDDS (sSMEDDS) particles produced by spray-drying using maltodextrin (MD), hypromellose (HPMC), and a combination of the two as a solid carrier. Naproxen (NPX) as the model drug was dissolved (at 6% concentration) or partially suspended (at 18% concentration) in a liqui...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2015.03.015
更新日期：2015-05-15 00:00:00
abstract：:Colloid probe atomic force microscopy (AFM) was utilised to quantify the cohesive forces of salbutamol sulphate in a model non-pressurised fluorinated liquid (mHFA), in the presence of increasing concentrations of poly(ethylene glycol) (PEG; molecular weight (MW) 200, 400 and 600). In addition, samples of PEG 400 (0.0...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2006.04.016
更新日期：2006-08-31 00:00:00
abstract：:Biocompatible and thermosensitive poly(organophosphazenes) with a lower critical solution temperature (LCST) below body temperature have been designed with the aim for the local delivery of peptide and protein drugs. These polymers could be synthesized by introducing short chain tri- or tetraethylene glycol as a hydro...
journal_title：International journal of pharmaceutics
pub_type： 杂志文章
doi：10.1016/j.ijpharm.2006.02.009
更新日期：2006-05-11 00:00:00
