Abstract：
OBJECTIVES:To assess whether the bonding potential to dentin of self-adhesive resin cements was affected by their pre-cure temperature. METHODS:Composite overlays (Paradigm MZ100, 3M ESPE) were luted on 100 extracted molars with G-Cem (GC Corp.), BisCem (Bisco), Multilink Sprint (Ivoclar Vivadent), SAC-A (Kuraray Co.), XP Bond/Calibra (Detrey Dentsply). The cements were used at pre-cure temperatures that recur in their handling (4 degrees C refrigerator, 24 degrees C room and 37 degrees C intraoral), as well as following pre-heating up to 60 degrees C. Microtensile bond strengths to dentin were measured and compared with statistical tests. Scanning electron microscope observations of cement-dentin interfaces were performed. RESULTS:The bond strength of G-Cem and Calibra was not significantly affected by temperature changes from refrigerator storage to intraoral application. At any assessed pre-cure temperature the total-etch luting agent Calibra achieved a significantly stronger adhesion than the auto-adhesive cements. Limited to null adhesion was yielded by BisCem and SAC-A. The procedure of 60 degrees C pre-heating, proposed in previous studies for restorative resin composites, was of no use for the tested luting agents. Only the total-etch luting agent Calibra developed a distinct hybrid layer. The self-adhesive cements exhibited a more superficial interaction with dentin. CONCLUSIONS:Regardless of the pre-cure temperature, the bonding potential of the self-adhesive resin cements was inferior to that of the total-etch luting agent tested as control. The adhesive properties of the BisCem and SAC-A were extremely scarce.
journal_name
J Dentjournal_title
Journal of dentistryauthors
Cantoro A,Goracci C,Carvalho CA,Coniglio I,Ferrari Mdoi
10.1016/j.jdent.2009.02.006subject
Has Abstractpub_date
2009-06-01 00:00:00pages
454-61issue
6eissn
0300-5712issn
1879-176Xpii
S0300-5712(09)00044-Xjournal_volume
37pub_type
杂志文章abstract：OBJECTIVE:The aim of this study was to identify factors influencing the selection of restorative materials. METHODS:In 1992, a random sample of Finnish dentists working in the public and private health care sectors were asked to provide information on restorative treatments during a given period. The study material co...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/0300-5712(95)00070-4
更新日期：1996-07-01 00:00:00
abstract：OBJECTIVES:The aim of this study was to investigate the mechanical properties of five types of fibre-reinforced composite (FRC) posts and compare them with traditional metal post. METHODS:Five FRC posts and a metallic post having different geometry and type of fibre (glass, carbon or quartz fibre) were loaded to failu...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2012.08.003
更新日期：2012-11-01 00:00:00
abstract：OBJECTIVE:The purpose of this paper is to review current knowledge and technologies for tooth remineralisation. DATA SOURCES:The literature was searched using the "Scopus" and "Web of Knowledge" database from the year 1971, with principal key words of *miner*, teeth and enamel. Language was restricted to English. Orig...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/S0300-5712(14)50003-6
更新日期：2014-06-01 00:00:00
abstract：OBJECTIVE:The aim of this study was to characterize the surface of Y-TZP after abrasion with various airborne particles. METHODS:The Y-TZP blanks were cut into 44 discs and sintered according to the manufacturer's instructions. The specimens were treated as follows: (a) control specimens, (b) abraded with 50μm alumina...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2012.05.003
更新日期：2012-09-01 00:00:00
abstract：OBJECTIVE:The aim of this study was to evaluate the induced changes in the chemical and mechanical performance at the glass-ionomer cement-dentin interface after mechanical load application. METHODS:A conventional glass-ionomer cement (GIC) (Ketac Bond), and a resin-modified glass-ionomer cement (RMGIC) (Vitrebond Plu...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.04.006
更新日期：2018-06-01 00:00:00
abstract：OBJECTIVES:To analyse the effect of first and second premolar extractions on eruption space for upper and lower third molars and on third molar position and angulation during orthodontic treatment. METHODS:The sample consisted of 296 patients of which 218 patients were orthodontically treated without extraction and 78...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2017.03.007
更新日期：2017-06-01 00:00:00
abstract：:The polymeric materials currently used in GIC are based on poly(acrylic acid), poly(acrylic acid-co-itaconic acid), or poly(acrylic acid-co-maleic acid). For the visible light cured (VLC) type GIC, the polymeric material is chemically modified to have pendant free-radical polymerizable double bonds, with the aqueous f...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/j.jdent.2005.08.008
更新日期：2006-09-01 00:00:00
abstract：OBJECTIVE:To explore the association between tooth wear and quality of life among adults in the United Kingdom, independently of sociodemographic factors and other common oral conditions. METHODS:We used data from 5654 dentate adults who participated in the 2009 Adult Dental Health Survey. Tooth wear was assessed duri...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2016.09.013
更新日期：2016-12-01 00:00:00
abstract：BACKGROUND:Untreated dental caries in children remains a public health challenge in poor communities. OBJECTIVES:This prospective controlled clinical trial investigated the effectiveness of a new anti-caries agent, Nano Silver Fluoride (NSF), applied once a year to arrest caries in children. METHODS:One hundred thirt...
journal_title：Journal of dentistry
pub_type： 杂志文章,随机对照试验
doi：10.1016/j.jdent.2014.05.017
更新日期：2014-08-01 00:00:00
abstract：:Ultrasound in the kHz frequency range is used widely in clinical dentistry. The most common uses are in the fields of periodontology and endodontics. The ultrasonic scaler works by the vibratory chipping action of the oscillating tip and is assisted by the presence of cavitational activity in the associated cooling wa...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/0300-5712(92)90003-u
更新日期：1992-02-01 00:00:00
abstract：:The head of a university, especially of a research university, expects a great deal from the dean, and the dean's team, of a dental school. These leaders have to balance an especially complex set of tasks and, in the process, pursue maximum integration into their university. Dental deans should aspire to be at least e...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/j.jdent.2019.05.003
更新日期：2019-08-01 00:00:00
abstract：OBJECTIVES:The purpose of this study was to characterize changes in surface topography associated with different surface treatments and their effect on tensile bond strength (TBS) of repaired water-aged anterior restorative micro-fine hybrid resin composite. METHODS:The TBS of repaired resin-based composite slabs eith...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2008.07.014
更新日期：2008-12-01 00:00:00
abstract：:Some laboratory tests of impression material accuracy mimic the clinical situation (simulatory) while others attempt to quantify a material's individual properties. This review concentrates on simulatory testing and aims to give a classification of the numerous tests available. Measurements can be made of the impressi...
journal_title：Journal of dentistry
pub_type： 杂志文章,评审
doi：10.1016/0300-5712(92)90117-u
更新日期：1992-04-01 00:00:00
abstract：OBJECTIVE:To test the hypothesis, derived from a previous short-term (7-day) assessment, that the absence of conventional pulp protection is not responsible for long-term pulp complications of composite resin restorations with self-etching adhesives. METHODS:All 150 patients who received the restorations with self-etc...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2007.02.005
更新日期：2007-06-01 00:00:00
abstract：OBJECTIVE:To investigate the remineralisation of chitosan pre-treated enamel white spot lesions (WSLs) by bioglass in the presence of the pellicle layer. METHODS:50 artificial enamel white spot lesions were created by acidic gel. Two lesions were used to investigate the formation of the pellicle layer by treating with...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.02.004
更新日期：2018-05-01 00:00:00
abstract：OBJECTIVES:To evaluate the effect of application method on immediate and 6-month resin-dentin microtensile bond strength (microTBS) and nanoleakage (NL) of three one-step self-etch adhesives systems (Clearfil S(3) Bond (S3), Xeno III (XE) and Adper Prompt L-Pop (AD)). METHODS:The oclusal enamel of 30 human molar was r...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2008.09.010
更新日期：2009-01-01 00:00:00
abstract：OBJECTIVES:This study investigated the in-vitro performance and fracture force of anterior implant-supported tooth-coloured fixed dental prosthesis (FDPs). Different material types with varying flexural strength and modulus of elasticity were compared with screw-retained or bonded application. MATERIALS AND METHODS:Id...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2020.103326
更新日期：2020-05-01 00:00:00
abstract：OBJECTIVES:The aim of this study was to measure the satisfaction of patients with respect to the aesthetics of veneer restorations (VRs) and to identify potential factors influencing their satisfaction. MATERIALS AND METHODS:One hundred and eighty VRs of three different types (direct composite, indirect composite and ...
journal_title：Journal of dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：10.1016/s0300-5712(96)00067-x
更新日期：1997-11-01 00:00:00
abstract：OBJECTIVES:To assess sustainability of shortened dental arches (SDA) by determining time to 'first restorative intervention' of teeth and time to 'tooth loss' and comparing these outcomes with complete dental arches (CDA) and SDA plus removable dental prostheses (RDP). METHODS:Data (follow-up time ranged from 27.4 (SD...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2013.05.013
更新日期：2013-08-01 00:00:00
abstract：OBJECTIVES:The aetiology of orofacial pain (OFP) is not well understood. We aimed to determine the relationship between OFP and local mechanical factors in an unselected general population sample. METHODS:A cross-sectional population-based survey was conducted in the United Kingdom, involving 2504 participants (adjust...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(03)00108-8
更新日期：2003-11-01 00:00:00
abstract：INTRODUCTION:C. tropicalis and C. krusei have emerged as virulent species causing oral infections. Both have developed resistance to commonly prescribed azole antifungal agents. OBJECTIVE:The study aimed to determine the effect of mouth rinses containing chlorhexidine digluconate (CHX), cetylpyridinium chloride (CPC) ...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2012.04.003
更新日期：2012-07-01 00:00:00
abstract：OBJECTIVES:This prospective clinical study compared the performance of implant-retained (study group) and tooth-retained (control) zirconia based fixed dental prostheses (FDPs) with at least 4 units. The null-hypothesis stated that complication rates in both groups are equally distributed. METHODS:The study included p...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2014.10.011
更新日期：2015-01-01 00:00:00
abstract：PURPOSE:Evaluate the dentine bond strength using different methods of application of opaque resins to mask dentine discoloration. MATERIALS AND METHODS:Dentine was exposed on 21 extracted molars which were assigned to 3 groups: G1: immediate dentine sealing (IDS). G2: IDS+opaque. G3: IDS with adhesive resin mixed with...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2011.07.005
更新日期：2011-10-01 00:00:00
abstract：OBJECTIVES:The bonding of resin to dentine is dependent largely on surface modifications. The purpose of the present study was to test the hypothesis that a role of the metal chlorides used as primers is to initiate polymerization of resin at the resin-dentine interface, thereby affecting bond strength. METHODS:Nine p...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(97)00030-4
更新日期：1998-09-01 00:00:00
abstract：OBJECTIVE:To compare near infrared transillumination device, DIAGNOcam (DC) and bitewing radiography (BW) for the detection of proximal caries. MATERIALS AND METHODS:This retrospective analysis of DC and BW images of 18 students in dental medicine who had consented to the anonymous use of their dental record. The data...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2017.12.008
更新日期：2018-03-01 00:00:00
abstract：OBJECTIVE:To investigate the effects of Halloysite® aluminosilicate clay nanotubes (HNTs) addition on selected physical, mechanical, and biological properties of experimental adhesive resins. METHODS:Experimental dentin adhesive resins were prepared by mixing Bis-GMA, TEGDMA, HEMA (50/25/25wt.%), and photo-initiators....
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2015.08.014
更新日期：2015-11-01 00:00:00
abstract：OBJECTIVE:The aim of this article was to assess the clinical evidence for or against acupuncture and acupuncture-like therapies as treatments for temporomandibular joint disorder (TMD). DATA:This systematic review includes randomized clinical trials (RCTs) of acupuncture as a treatment for TMD compared to sham acupunc...
journal_title：Journal of dentistry
pub_type： 杂志文章,meta分析,评审
doi：10.1016/j.jdent.2011.02.006
更新日期：2011-05-01 00:00:00
abstract：OBJECTIVES:The main objective is the characterisation of the setting reaction in glass ionomer cements based on experimental ionomer glasses with different fluorine content and a commercial glass ionomer cement liquid by using 13C CP/MAS-NMR, 29Si, 27Al and 31P MAS-NMR spectroscopy in order to receive information speci...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2005.08.006
更新日期：2006-09-01 00:00:00
abstract：INTRODUCTION:We assessed time trends in root caries experience, i.e. the sum of filled and carious root surfaces (FRS, CRS), and evaluated risk indicators of FRS/CRS in Germany. METHODS:FRS and CRS from repeated waves (1997, 2005, 2014) of the nationally-representative German Oral Health Studies were analyzed in 35-44...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/j.jdent.2018.08.013
更新日期：2018-11-01 00:00:00
abstract：OBJECTIVE:This study compared the antibacterial activities of two dentin bonding systems (ABF, Kuraray and Reactmer Bond, Shofu) by a conventional agar well technique and a newly designed in vitro test using tooth model. METHODS:In the agar well technique, the test materials were filled in the wells of Muller Hinton a...
journal_title：Journal of dentistry
pub_type： 杂志文章
doi：10.1016/s0300-5712(03)00006-x
更新日期：2003-02-01 00:00:00
