Dehydration behavior of nedocromil magnesium pentahydrate.

Abstract:

:The dehydration of nedocromil magnesium (NM) pentahydrate proceeds in two steps, corresponding to the loss of four water molecules in the first step and one water molecule in the second step. The effects of temperature, particle size, sample weight, water vapor pressure and dehydration-rehydration cycle on both the kinetics and activation energy of the dehydration of NM pentahydrate were studied using isothermal TGA and temperature-ramp DSC analyzed by Kissinger's method. The dehydration kinetics for both steps are best described by the Avrami-Erofeev equations, suggesting a nucleation-controlled mechanism. The high activation energy for the second dehydration step indicates that the last water molecule, which is bonded both to a magnesium ion and to a carboxylate oxygen atom, is more 'tightly bound'. The activation energy decreased with increasing sample weight and decreasing particle size. The dehydration rate increased with decreasing water vapor pressure and with repetition of the dehydration-hydration cycle. Dynamic and isothermal PXRD, and 13C solid-state NMR were employed to provide an insight into the dehydration mechanism and the nature of solid-state phase transformation during the dehydration. Molecular modeling with Cerius(2) was used to visualize the crystal structure and to construct the molecular packing diagram. A correlation was noted between the dehydration behavior and the bonding environment of the water molecules in the crystal structure.

journal_name

Int J Pharm

authors

Zhu H,Grant DJ

doi

10.1016/s0378-5173(00)00700-6

keywords:

subject

Has Abstract

pub_date

2001-03-14 00:00:00

pages

251-62

issue

1-2

eissn

0378-5173

issn

1873-3476

pii

S0378-5173(00)00700-6

journal_volume

215

pub_type

杂志文章
  • Prolonged subcutaneous delivery of low molecular weight heparin based on thermoresponsive hydrogels with chitosan nanocomplexes: Design, in vitro evaluation, and cytotoxicity studies.

    abstract::Low molecular weight heparins (LMWHs) have risen in popularity over the past decades. Owing to their appropriate pharmacokinetic profile, they enable long-term clinical applications, e.g. prophylaxis of deep vein thrombosis. Although the administration of LMWHs is not as frequent as of heparin, it still requires once ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.04.063

    authors: Radivojša Matanović M,Grabnar I,Gosenca M,Grabnar PA

    更新日期:2015-07-05 00:00:00

  • The effect of ileal brake activators on the oral bioavailability of atenolol in man.

    abstract::A study was carried out in human volunteers to investigate whether ileal brake activators could alter the bioavailability of atenolol from the small intestine by slowing intestinal transit and thereby increasing the time available for absorption. Oleic acid and a monoglyceride were formulated into modified release cap...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(02)00393-9

    authors: Dobson CL,Davis SS,Chauhan S,Sparrow RA,Wilding IR

    更新日期:2002-11-06 00:00:00

  • Effect of binders on the release rates of direct molded verapamil tablets using twin-screw extruder in melt granulation.

    abstract::Conventional manufacturing of pharmaceutical tablets often involves single processes such as blending, granulation, milling and direct compression. A process that minimizes and incorporates all these in a single continuous step is desirable. The concept of omitting milling step followed by direct-molding of tablets ut...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.12.053

    authors: Tan DC,Chin WW,Tan EH,Hong S,Gu W,Gokhale R

    更新日期:2014-03-10 00:00:00

  • Behavior of uptake of moisture by drugs and excipients under accelerated conditions of temperature and humidity in the absence and the presence of light. 1. Pure anti-tuberculosis drugs and their combinations.

    abstract::An investigation was carried out to determine the behavior of moisture gain by four anti-tuberculosis drugs, viz. rifampicin, isoniazid, pyrazinamide and ethambutol, when exposed in pure form and in combinations to accelerated conditions of 40 degrees C and 75% RH, in the absence and the presence of light. Weight gain...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(02)00340-x

    authors: Singh S,Bhutani H,Mariappan TT,Kaur H,Bajaj M,Pakhale S

    更新日期:2002-10-01 00:00:00

  • Influence of membrane structure on the preparation of colloidal lipid dispersions by premix membrane emulsification.

    abstract::Since premix membrane emulsification was developed as alternative technique for the preparation of emulsions and solid lipid particles as carrier systems for lipophilic drugs, many types of membranes have been used in this preparation process. The purpose of this study was to evaluate the influence of different types ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.02.013

    authors: Joseph S,Bunjes H

    更新日期:2013-03-25 00:00:00

  • Polymer particle erosion controlling drug release. I. Factors influencing drug release and characterization of the release mechanism.

    abstract::The present study deals with controlled drug delivery from hydrocolloid tablets by polymer particle erosion. The influence of excipients and formulation factors on the dissolution behaviour of the methyl hydroxyethyl cellulose (MHEC)-tablets is investigated. Linear drug release with low susceptibility to hydrodynamic ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(01)00596-8

    authors: Zuleger S,Lippold BC

    更新日期:2001-04-17 00:00:00

  • Development of co-solvent freeze-drying method for the encapsulation of water-insoluble thiostrepton in sterically stabilized micelles.

    abstract::The purpose of this work was to develop a practical and scalable method to encapsulate the hydrophobic antibiotic thiostrepton (TST) in sterically stabilized micelles (SSM). Using the conventional method of thin-film hydration, we encapsulated up to 5 drug molecules per SSM (diameter ∼ 16 nm). However, since this meth...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2018.12.001

    authors: Esparza K,Onyuksel H

    更新日期:2019-02-10 00:00:00

  • Occlusion effect on transcutaneous NSAID delivery from conventional and carrier-based formulations.

    abstract::We studied skin occlusion effects in vitro and in vivo on local and systemic delivery of ketoprofen across the organ, using the drug in a conventional non-occlusive topical gel (Togal Mobil-Gel), an occlusive tape (Mohrus), and the new targeted analgesic (Diractin), comprising ultradeformable, hydrophilic carriers in ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.04.005

    authors: Cevc G,Mazgareanu S,Rother M,Vierl U

    更新日期:2008-07-09 00:00:00

  • Predicting the gastrointestinal behaviour of modified-release products: utility of a novel dynamic dissolution test apparatus involving the use of bicarbonate buffers.

    abstract::The establishment of physiologically relevant in vitro-in vivo correlations (IV-IVCs) is key for any biorelevant dissolution test. Historically, bicarbonate buffers have produced better correlations than compendial phosphate buffered media, though such tests are usually performed at a constant pH experiment, overlooki...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.09.003

    authors: Merchant HA,Goyanes A,Parashar N,Basit AW

    更新日期:2014-11-20 00:00:00

  • A novel flunarizine hydrochloride-loaded organogel for intraocular drug delivery in situ: Design, physicochemical characteristics and inspection.

    abstract::We developed a safe and efficacious drug delivery system for treatment of brain diseases. A novel in-situ gel system was prepared using soybean oil, stearic acid and N-methyl-2-pyrrolidinone (NMP) (10:1:3, v/w/v). This system had low viscosity as a sol in vitro and turned into a solid or semi-solid gel in situ after a...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119027

    authors: Dai M,Bai L,Zhang H,Ma Q,Luo R,Lei F,Fei Q,He N

    更新日期:2020-02-25 00:00:00

  • Search for technological reasons to develop a capsule or a tablet formulation with respect to wettability and dissolution.

    abstract::Proquazone, a poorly wettable compound, was used as a model drug in the search for reasons to develop a capsule or tablet formulation. The capsules were filled with proquazone as active ingredient, with lactose monohydrate (200 mesh) as filler and with magnesium stearate as lubricant. The tablet was made out of a gran...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2004.09.006

    authors: von Orelli J,Leuenberger H

    更新日期:2004-12-09 00:00:00

  • Characterisation of solid dispersions of paracetamol and EUDRAGIT E prepared by hot-melt extrusion using thermal, microthermal and spectroscopic analysis.

    abstract::Hot-melt extrusion has attracted considerable interest within the pharmaceutical industry. However, there remains some uncertainty as to how to characterise the physical structure of the extruded systems, particularly in terms of identifying the nature of the drug dispersion within the polymer. The aim of the study wa...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.11.048

    authors: Qi S,Gryczke A,Belton P,Craig DQ

    更新日期:2008-04-16 00:00:00

  • A theoretical approach to evaluate the release rate of acetaminophen from erosive wax matrix dosage forms.

    abstract::To predict drug dissolution and understand the mechanisms of drug release from wax matrix dosage forms containing glyceryl monostearate (GM; a wax base), aminoalkyl methacrylate copolymer E (AMCE; a pH-dependent functional polymer), and acetaminophen (APAP; a model drug), we tried to derive a novel mathematical model ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2011.05.015

    authors: Agata Y,Iwao Y,Shiino K,Miyagishima A,Itai S

    更新日期:2011-07-29 00:00:00

  • Assessing the physical-chemical properties and stability of dapivirine-loaded polymeric nanoparticles.

    abstract::Nanocarriers may provide interesting delivery platforms for microbicide drugs and their characterization should be addressed early in development. Differently surface-engineered dapivirine-loaded, poly(epsilon-caprolactone) (PCL)-based nanoparticles (NPs) were obtained by nanoprecipitation using polyethylene oxide (PE...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.08.049

    authors: das Neves J,Amiji M,Bahia MF,Sarmento B

    更新日期:2013-11-18 00:00:00

  • A thermo-responsive and self-healing liposome-in-hydrogel system as an antitubercular drug carrier for localized bone tuberculosis therapy.

    abstract::Isoniazid (INH) is a first-line therapy for bone tuberculosis (TB), but its clinic benefits are limited by severe side-effects after long-time administration. While nano-drug delivery systems present as promising strategies for INH delivery, the therapeutic efficacies are usually suboptimal due to ineffective drug acc...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2018.12.083

    authors: Liu P,Guo B,Wang S,Ding J,Zhou W

    更新日期:2019-03-10 00:00:00

  • Physico-chemical characterisation and transfection efficiency of lipid-based gene delivery complexes.

    abstract::Cationic liposomes spontaneously interact with negatively charged plasmid DNA to form a transfection competent complex capable of promoting the expression of a therapeutic gene. This work aims to improve the understanding of the poorly defined mechanisms and structural rearrangements associated with the lipid-DNA inte...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00117-9

    authors: Birchall JC,Kellaway IW,Mills SN

    更新日期:1999-06-25 00:00:00

  • The influence of carrier morphology on drug delivery by dry powder inhalers.

    abstract::Alpha-lactose monohydrate was prepared to have different morphological features but with similar particle size. The crystal shape and surface smoothness of lactose were quantified by a number of shape descriptors and these were supported qualitatively by the visual examination of scanning electron (SE) micrographs of ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(00)00347-1

    authors: Zeng XM,Martin GP,Marriott C,Pritchard J

    更新日期:2000-04-25 00:00:00

  • Transdermal delivery of naloxone: effect of water, propylene glycol, ethanol and their binary combinations on permeation through rat skin.

    abstract::The effect of the solvent systems water, ethanol (EtOH), propylene glycol (PG) and their binary combinations was studied on the ex vivo permeation profile of the opioid receptor antagonist, naloxone, through rat skin. Fourier transform-infrared (FT-IR) spectroscopic studies were done to investigate the effect of enhan...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(01)00634-2

    authors: Panchagnula R,Salve PS,Thomas NS,Jain AK,Ramarao P

    更新日期:2001-05-21 00:00:00

  • Downstream drug product processing of itraconazole nanosuspension: Factors influencing drug particle size and dissolution from nanosuspension-layered beads.

    abstract::There is more research required to broaden the knowledge on the downstream processing of nanosuspensions into solid oral dosage forms, especially for coated nanosuspensions onto beads as carriers. This study focuses on bead layering as one approach to solidify nanosuspensions. The aim was to systematically investigate...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.04.012

    authors: Parmentier J,Tan EH,Low A,Möschwitzer JP

    更新日期:2017-05-30 00:00:00

  • Systemic in vitro and in vivo evaluation for determining the feasibility of making an amorphous solid dispersion of a B-Raf (rapidly accelerated fibrosarcoma) inhibitor.

    abstract::It is well acknowledged that oral bioavailability of a drug candidate is often influenced by factors such as the permeability, physico-chemical properties, and metabolism of the drug. Among the physico-chemical properties, solubility and dissolution rate are considered the most critical factors affecting the oral bioa...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.06.064

    authors: Cui Y,Chiang PC,Choo EF,Boggs J,Rudolph J,Grina J,Wenglowsky S,Ran Y

    更新日期:2013-09-15 00:00:00

  • Interactions between a poorly soluble cationic drug and sodium dodecyl sulfate in dissolution medium and their impact on in vitro dissolution behavior.

    abstract::In the pharmaceutical industry, in vitro dissolution testing ofsolid oral dosage forms is a very important tool for drug development and quality control. However, ion-pairing interaction between the ionic drugand surfactants in dissolution medium often occurs, resulting in inconsistent and incomplete drug release. The...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.10.063

    authors: Huang Z,Parikh S,Fish WP

    更新日期:2018-01-15 00:00:00

  • A new topical formulation for psoriasis: development of methotrexate-loaded nanostructured lipid carriers.

    abstract::The aim of the present work was to develop and assess the potential of nanostructured lipid carriers (NLCs) loaded with methotrexate as a new approach for topical therapy of psoriasis. Methotrexate-loaded NLCs were prepared via a modified hot homogenization combined with ultrasonication techniques using either polysor...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.10.067

    authors: Pinto MF,Moura CC,Nunes C,Segundo MA,Costa Lima SA,Reis S

    更新日期:2014-12-30 00:00:00

  • Shape imposed by secondary structure of a polypeptide affects its free diffusion through liquid-filled pores.

    abstract::The purpose of the present study was to investigate the effect of secondary structure of three model polypeptides on their apparent permeability (P(app)) across a synthetic, microporous membrane. Poly-L-lysine (PL), poly-L-glutamate (PGlu), and poly-L-lysine-L-phenylalanine (1:1) (PLP) were selected because a solution...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(02)00320-4

    authors: Salamat-Miller N,Chittchang M,Mitra AK,Johnston TP

    更新日期:2002-09-05 00:00:00

  • Gene transfer by histidylated lipopolyplexes: A dehydration method allowing preservation of their physicochemical parameters and transfection efficiency.

    abstract::Lipid-Polycation-DNA complexes (LPD) is a promising non-viral system for nucleic acids delivery. Usually, LPD are prepared just before their use. In the present work, we have examined whether dehydration of a new type of LPD (named LPD100) might be a storage option. LPD100 comprises PEGylated histidylated polylysine/p...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2011.04.009

    authors: Perche F,Lambert O,Berchel M,Jaffrès PA,Pichon C,Midoux P

    更新日期:2012-02-14 00:00:00

  • Hydrogel based approaches for cardiac tissue engineering.

    abstract::Heart failure still represents the leading cause of death worldwide. Novel strategies using stem cells and growth factors have been investigated for effective cardiac tissue regeneration and heart function recovery. However, some major challenges limit their translation to the clinic. Recently, biomaterials have emerg...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2016.10.061

    authors: Saludas L,Pascual-Gil S,Prósper F,Garbayo E,Blanco-Prieto M

    更新日期:2017-05-25 00:00:00

  • Mechanistic study of preparation of drug/polymer/surfactant ternary hot extrudates to obtain small and stable drug nanocrystal suspensions.

    abstract::We studied optimized conditions for preparing ternary hot extrudates (HEs) of glibenclamide (GLB)/polyvinylpyrrolidone (PVP)/sodium dodecyl sulfate to generate stable nanocrystal suspensions following aqueous dispersion. Raman and solid-state NMR measurements of ternary HEs prepared by altering HE conditions revealed ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.120003

    authors: Omagari K,Ueda K,Zhijing Z,Higashi K,Inoue M,Fukami T,Moribe K

    更新日期:2020-12-15 00:00:00

  • In vitro biocompatibility studies with the experimental anticancer agent BIBX1382BS.

    abstract::The novel anticancer agent BIBX1382BS is a representative of the human epidermal growth factor receptor (EGFR) tyrosine kinase inhibitors. BIBX1382BS, for parenteral use, is formulated pharmaceutically as a lyophilized product containing 100 mg BIBX1382BS per dosage unit. This in vitro study was performed to establish...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00389-0

    authors: Nuijen B,Bouma M,Henrar RE,Brauns U,Bette P,Bult A,Beijnen JH

    更新日期:2000-01-25 00:00:00

  • Investigation into the influence of polymeric stabilizing excipients on inter-particulate forces in pressurised metered dose inhalers.

    abstract::Colloid probe atomic force microscopy (AFM) was utilised to quantify the cohesive forces of salbutamol sulphate in a model non-pressurised fluorinated liquid (mHFA), in the presence of increasing concentrations of poly(ethylene glycol) (PEG; molecular weight (MW) 200, 400 and 600). In addition, samples of PEG 400 (0.0...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2006.04.016

    authors: Traini D,Young PM,Rogueda P,Price R

    更新日期:2006-08-31 00:00:00

  • beta-carotene encapsulation in a mannitol matrix as affected by divalent cations and phosphate anion.

    abstract::The effects of addition of divalent cations and phosphate buffer on the degree of beta-carotene encapsulation in a mannitol matrix during freeze-drying were analyzed. The degradation rate of encapsulated beta-carotene as a function of % RH and its relationship with the physical state of the matrix during storage at 25...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2006.09.023

    authors: Sutter SC,Buera MP,Elizalde BE

    更新日期:2007-03-06 00:00:00

  • Permeation studies through porcine small intestine of furosemide solutions for personalised paediatric administration.

    abstract::Personalized medicine is a challenging research area in paediatric drug design since no suitable pharmaceutical forms are currently available. Furosemide is an anthranilic acid derivative used in paediatric practice to treat cardiac and pulmonary disorders in premature infants and neonates. However, it is not commerci...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.08.059

    authors: Provenza N,Calpena AC,Mallandrich M,Sánchez A,Egea MA,Clares B

    更新日期:2014-11-20 00:00:00