Abstract：
:In the absence of a 3D structure of the target biomolecule, to propose the 3D requirements for a small molecule to exhibit a particular bioactivity, one must supply both a bioactive conformation and a superposition rule for every active compound. Our strategy identifies both simultaneously. We first generate and optimize all low-energy conformations by any suitable method. For each conformation we then use ALADDIN to calculate the location of points to be considered as part of the superposition. These points include atoms in the molecule and projections from the molecule to hydrogen-bond donors and acceptors or charged groups in the binding site. These positions and the relative energy of each conformation are the input to our new program DISCO. It uses a clique-detection method to find superpositions that contain at least one conformation of each molecule and user-specified numbers of point types and chirality. DISCO is fast; for example, it takes about 1 min CPU to propose pharmacophores from 21 conformations of seven molecules. We typically run DISCO several times to compare alternative pharmacophore maps. For D2 dopamine agonists DISCO shows that the newer 2-aminothiazoles fit the traditional pharmacophore. Using site points correctly identifies the bioactive enantiomers of indoles to compare with catechols whereas using only ligand points leads to selecting the inactive enantiomer for the pharmacophore map. In addition, DISCO reproduces pharmacophore maps of benzodiazepines in the literature and proposes subtle improvements. Our experience suggests that clique-detection methods will find many applications in computational chemistry and computer-assisted molecular design.
journal_name
J Comput Aided Mol Desjournal_title
Journal of computer-aided molecular designauthors
Martin YC,Bures MG,Danaher EA,DeLazzer J,Lico I,Pavlik PAdoi
10.1007/BF00141577subject
Has Abstractpub_date
1993-02-01 00:00:00pages
83-102issue
1eissn
0920-654Xissn
1573-4951journal_volume
7pub_type
杂志文章abstract：:Using the X-ray crystal structure of the human topoisomerase I (top1) - DNA cleavable complex and the Sybyl software package, we have developed a general model for the ternary cleavable complex formed with four protoberberine alkaloids differing in the substitution on the terminal phenyl rings and covering a broad ran...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-004-7878-1
更新日期：2004-12-01 00:00:00
abstract：:The acronym "CADD" is often used interchangeably to refer to "Computer Aided Drug Discovery" and "Computer Aided Drug Design". While the former definition implies the use of a computer to impact one or more aspects of discovering a drug, in this paper we contend that computational chemists are most effective when they...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-016-0004-3
更新日期：2017-03-01 00:00:00
abstract：:The Fas antigen, a cell surface receptor belonging to the tumor necrosis factor receptor (TNFR) superfamily, triggers programmed cell death (apoptosis) in the immune system. The three-dimensional structure of Fas and molecular details of the interaction between Fas and its ligand are currently unknown. A three-dimensi...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1023/a:1008011024584
更新日期：1997-01-01 00:00:00
abstract：:Leishmania donovani dipeptidylcarboxypeptidsae (LdDCP), an angiotensin converting enzyme (ACE) related metallopeptidase has been identified and characterized as a putative drug target for antileishmanial chemotherapy. The kinetic parameters for LdDCP with substrate, Hip-His-Leu were determined as, Km, 4 mM and Vmax, 1...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-009-9315-y
更新日期：2010-01-01 00:00:00
abstract：:We have used the Chemical Structure DataBase (CSDB) of the NCI CADD Group, an aggregated collection of over 150 small-molecule databases totaling 103.5 million structure records, to conduct tautomerism analyses on one of the largest currently existing sets of real (i.e. not computer-generated) compounds. This analysis...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-010-9346-4
更新日期：2010-06-01 00:00:00
abstract：:The support vector machine, which is a novel algorithm from the machine learning community, was used to develop quantitation and classification models which can be used as a potential screening mechanism for a novel series of COX-2 selective inhibitors. Each compound was represented by calculated structural descriptor...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-004-2722-1
更新日期：2004-06-01 00:00:00
abstract：:The de novo design program Skelgen has been used to design inhibitor structures for four targets of pharmaceutical interest. The designed structures are compared to modeled binding modes of known inhibitors (i) visually and (ii) by means of a novel similarity measure considering the size and spatial proximity of the m...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1023/a:1021242018286
更新日期：2002-07-01 00:00:00
abstract：:Data driven decision making is a key element of today's pharmaceutical research, including early drug discovery. It comprises questions like which target to pursue, which chemical series to pursue, which compound to make next, or which compound to select for advanced profiling and promotion to pre-clinical development...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-015-9871-2
更新日期：2015-09-01 00:00:00
abstract：:RNA interference (RNAi) is a critical cellular pathway activated by double stranded RNA and regulates the gene expression of target mRNA. During RNAi, the 3' end of siRNA binds with the PAZ domain, followed by release and rebinding in a cyclic manner, which deemed essential for proper gene silencing. Recently, we prov...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-013-9665-3
更新日期：2013-07-01 00:00:00
abstract：:Multipoint interactions between synthetic and natural polymers provide a promising platform for many topical applications, including therapeutic blockage of virus-specific targets. Docking may become a useful tool for modelling of such interactions. However, the rigid docking cannot be correctly applied to synthetic p...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-012-9621-7
更新日期：2012-12-01 00:00:00
abstract：:Many molecular simulation methods use force fields to help model and simulate molecules and their behavior in various environments. Force fields are sets of functions and parameters used to calculate the potential energy of a chemical system as a function of the atomic coordinates. Despite the widespread use of force ...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-020-00367-1
更新日期：2021-01-28 00:00:00
abstract：:A Comparative Molecular Field Analysis (CoMFA) and an interaction energy-based method were applied on a database holding the 3D structures of 29 thrombin-inhibitor complexes. Several parameters were optimized in both methods in order to obtain the best correlation between theoretical and experimentally determined bind...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1023/a:1008010016362
更新日期：1999-05-01 00:00:00
abstract：:The pharmacophoric concept plays an important role in ligand-based drug design methods to describe the similarity and diversity of molecules, and could also be exploited as a molecular representation scheme. A three-point pharmacophore method was used as a molecular representation perception. This procedure was implem...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-007-9110-6
更新日期：2007-05-01 00:00:00
abstract：:The Ligand Design (LUDI) approach has been used in order to design leucine aminopeptidase inhibitors, predict their activity and analyze their interactions with the enzyme. The investigation was based on the crystal structure of bovine lens leucine aminopeptidase (LAP) complexed with its inhibitor--the phosphonic acid...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1023/a:1008189716955
更新日期：2000-08-01 00:00:00
abstract：:Glucokinase (GK) is involved in normal glucose homeostasis and therefore it is a valid target for drug design and discovery efforts. GK activators (GKAs) have excellent potential as treatments of hyperglycemia and diabetes. The combined recent interest in GKAs, together with docking limitations and shortages of dockin...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-014-9740-4
更新日期：2014-05-01 00:00:00
abstract：:The mounting evidences have shown that signal transducer and activator of transcription 3 (Stat3) is a critical target for cancer therapy. Recently, we developed a G-quartet oligonucleotide T40214 as a novel and potent Stat3 inhibitor. T40214 specifically inhibited DNA-binding activity of Stat3 and significantly suppr...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-007-9147-6
更新日期：2007-10-01 00:00:00
abstract：:We examined "descriptor collision" for several chemical fingerprint systems (MDL 320, Daylight, SMDL), and for a 2D-based descriptor set. For large databases (ChemNavigator and WOMBAT), the smallest collision rate remains around 5%. We systematically increase the "descriptor collision" rate (here termed "descriptor co...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-005-9020-4
更新日期：2005-09-01 00:00:00
abstract：:Crystal structures of the 1,4-dihydropyridine (1,4-DHP) calcium channel activators Bay K 8643 [methyl 1,4-dihydro-2,6-dimethyl-3-nitro-4-(3-nitrophenyl)-pyridine-5-carboxy lat e], Bay O 8495 [methyl 1,4-dihydro-2,6-dimethyl-3-nitro-4-(3-trifluoromethylphenyl)-pyridine-5- carboxylate], and Bay O 9507 [methyl 1,4-dihydr...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/BF00129749
更新日期：1991-04-01 00:00:00
abstract：:In the present work we have modeled the Michaelis complex of the cyclic-Adenosine Monophosphate Dependent (cAMD) Protein Kinase A (PKA) with Mg(2)ATP and the heptapeptide substrate Kemptide by classical molecular dynamics. The chosen synthetic substrate is relevant for its high efficiency and small size, and it has no...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-007-9143-x
更新日期：2007-10-01 00:00:00
abstract：:AstexViewer is a Java molecular graphics program that can be used for visualisation in many aspects of structure-based drug design. This paper describes its functionality, implementation and examples of its use. The program can run as an Applet in a web browser allowing structures to be displayed without installing ad...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1023/a:1023813504011
更新日期：2002-12-01 00:00:00
abstract：:Molecular modeling methodologies such as molecular docking, pharmacophore modeling, and 3D-QSAR, rely on conformational searches of small molecules as a starting point. All of these methodologies seek conformations of the small molecules as they bind to target proteins, i.e., their active conformations. Thus the quest...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1023/a:1016320106741
更新日期：2002-02-01 00:00:00
abstract：:Pharmacophore methods provide a way of establishing a structure activity relationship for a series of known active ligands. Often, there are several plausible hypotheses that could explain the same set of ligands and, in such cases, it is important that the chemist is presented with alternatives that can be tested wit...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-004-5523-7
更新日期：2004-11-01 00:00:00
abstract：:Feature selection is commonly used as a preprocessing step to machine learning for improving learning performance, lowering computational complexity and facilitating model interpretation. This paper proposes the application of boosting feature selection to improve the classification performance of standard feature sel...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-018-0171-5
更新日期：2018-11-01 00:00:00
abstract：:Hydrogen bonds are the most specific, and therefore predictable of the intermolecular interactions involved in ligand-protein binding. Given the structure of a molecule, it is possible to estimate the positions at which complementary hydrogen-bonding atoms could be found. Crystal-survey data are used in the design of ...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1023/a:1007900527102
更新日期：1997-05-01 00:00:00
abstract：:We introduce the QuanSA method for inducing physically meaningful field-based models of ligand binding pockets based on structure-activity data alone. The method is closely related to the QMOD approach, substituting a learned scoring field for a pocket constructed of molecular fragments. The problem of mutual ligand a...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-018-0126-x
更新日期：2018-07-01 00:00:00
abstract：:Babesia bigemina is a protozoan parasite that causes babesiosis, a disease with a world-wide distribution in mammals, principally affecting cattle and man. The unveiling of the genome of B. bigemina is a project in active progress that has already revealed a number of new targets with potential interest for the design...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-013-9682-2
更新日期：2013-09-01 00:00:00
abstract：:The growing number of protein-ligand complex structures, particularly the structures of proteins co-bound with different ligands, in the Protein Data Bank helps us tackle two major challenges in molecular docking studies: the protein flexibility and the scoring function. Here, we introduced a systematic strategy by us...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-017-0038-1
更新日期：2017-08-01 00:00:00
abstract：:Both society and industry are interested in increasing the safety of pharmaceuticals. Potentially dangerous compounds could be filtered out at early stages of R&D by computer prediction of biological activity and ADMET characteristics. Accuracy of such predictions strongly depends on the quality & quantity of informat...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-005-9014-2
更新日期：2005-09-01 00:00:00
abstract：:The CASE (Computer Automated Structure Evaluation) program, with the aid of a geometry index for discriminating cis and trans isomers, has been used to study a set of retinoids tested for teratogenicity in hamsters. CASE identified 8 fragments, the most important representing the non-polar terminus of a retinoid with ...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/BF00125314
更新日期：1990-06-01 00:00:00
abstract：:Cytochrome P450 (CYP) enzymes play an important role in the metabolism of xenobiotics. Since they are connected to drug interactions, screening for potential inhibitors is of utmost importance in drug discovery settings. Our study provides an extensive classification model for P450-drug interactions with one of the mo...
journal_title：Journal of computer-aided molecular design
pub_type： 杂志文章
doi：10.1007/s10822-020-00308-y
更新日期：2020-08-01 00:00:00
