Preparation and Characterization of Minoxidil Loaded Nanostructured Lipid Carriers.

Abstract:

:Nanostructured lipid carriers (NLCs) are interesting delivery systems for enhancing the penetration of an active substance through the skin after topical administration. The present paper described the development of a novel NLCs for minoxidil (MXD) topical delivery. Stearic acid and oleic acid that showed the highest solubility for MXD were selected as solid lipid and liquid lipid, respectively, and the NLCs were prepared by hot high pressure homogenization method. The minoxidil loaded NLCs prepared accordingly to the optimal formulation exhibited spherical shape with a mean diameter of 281.4 ± 7.4 nm, polydispersity of 0.207 ± 0.009, zeta potential of -32.90 ± 1.23 mV, drug entrapment efficiency of 92.48 ± 0.31%, and drug loading of 13.85 ± 0.47%. Storage stability studies demonstrated that the particle size and entrapment efficiency of the MXD-NLCs were not changed during 3 months both at 4°C and room temperature. Moreover, the release of MXD from the NLCs was faster than drug release from SLNs. In vitro skin permeability test demonstrated that MXD-NLCs had a more pronounced permeation and retention profile than MXD-SLNs. Furthermore, no erythema was observed after administration of MXD-NLCs. All these results indicated that the developed MXD-NLCs could be a promising and effective nanocarrier for topical delivery of MXD.

journal_name

AAPS PharmSciTech

journal_title

AAPS PharmSciTech

authors

Wang W,Chen L,Huang X,Shao A

doi

10.1208/s12249-016-0519-x

subject

Has Abstract

pub_date

2017-02-01 00:00:00

pages

509-516

issue

2

issn

1530-9932

pii

10.1208/s12249-016-0519-x

journal_volume

18

pub_type

杂志文章
  • Multimodal particle size distributions emitted from HFA-134a solution pressurized metered-dose inhalers.

    abstract::The purpose of this research was to investigate the measurement and in vitro delivery implications of multimodal distributions, occurring near or in the respirable range, emitted from pressurized metered-dose inhalers (pMDIs). Particle size distributions of solution pMDIs containing hydrofluoroalkane-134a (HFA-134a) a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt040338

    authors: Smyth HD,Hickey AJ

    更新日期:2003-01-01 00:00:00

  • Design and Characterization of Metformin-Loaded Solid Lipid Nanoparticles for Colon Cancer.

    abstract::Colorectal cancer is a global concern, and its treatment is fraught with non-selective effects including adverse side effects requiring hospital visits and palliative care. A relatively safe drug formulated in a bioavailability enhancing and targeting delivery platform will be of significance. Metformin-loaded solid l...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-016-0505-3

    authors: Ngwuluka NC,Kotak DJ,Devarajan PV

    更新日期:2017-02-01 00:00:00

  • Evaluation of the performance characteristics of bilayer tablets: Part II. Impact of environmental conditions on the strength of bilayer tablets.

    abstract::Ambient air humidity and temperature are known to influence the mechanical strength of tablets. The objective of this work is to understand the influence of processing parameters and environmental conditions (humidity and temperature) on the strength of bilayer tablets. As part of this study, bilayer tablets were comp...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9846-8

    authors: Kottala N,Abebe A,Sprockel O,Bergum J,Nikfar F,Cuitiño AM

    更新日期:2012-12-01 00:00:00

  • Assessment of the influence factors on nasal spray droplet velocity using phase-Doppler anemometry (PDA).

    abstract::Droplet velocity is an important parameter that can be used to characterize nasal spray products. In this study, a phase-Doppler anemometry (PDA) system was used to measure the droplet velocities of nasal sprays. A survey of seven commercial nasal spray products showed a range of droplet velocities from 6.7 to 19.2 m/...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9594-1

    authors: Liu X,Doub WH,Guo C

    更新日期:2011-03-01 00:00:00

  • Nanosuspension-Based Aloe vera Gel of Silver Sulfadiazine with Improved Wound Healing Activity.

    abstract::The present study focuses on the development and characterization of nanosuspension of a poorly soluble drug, silver sulfadiazine (SSD) incorporated in Aloe vera gel (AV-gel) for improving its therapeutic efficacy. The SSD solution in ammonia was subjected to nanoprecipitation in surfactant solution and particle size ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0817-y

    authors: Barkat MA,Harshita,Ahmad I,Ali R,Singh SP,Pottoo FH,Beg S,Ahmad FJ

    更新日期:2017-11-01 00:00:00

  • Design and Evaluation of Hydrophilic Matrix System for pH-Independent Sustained Release of Weakly Acidic Poorly Soluble Drug.

    abstract::The aim of this research was to design and evaluate a hydrophilic matrix system for sustained release of glipizide, a weakly acidic poor soluble drug. A combination of inclusion complexation and microenvironmental pH modification techniques was utilized to improve the dissolution and pH-independent release of glipizid...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1008-1

    authors: Huang J,Lin H,Peng B,Huang Q,Shuai F,Xie Y

    更新日期:2018-07-01 00:00:00

  • Studies on formulation development of mucoadhesive sustained release itraconazole tablet using response surface methodology.

    abstract::The purpose of this research was to prepare and evaluate sustained release mucoadhesive tablets of Itraconazole. It is practically insoluble in aqueous fluids hence its solid dispersion with Eudragit E100 was prepared by spray drying. This was formulated in matrix of hydrophilic mucoadhesive polymers Carbopol 934P (CP...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9119-8

    authors: Madgulkar A,Kadam S,Pokharkar V

    更新日期:2008-01-01 00:00:00

  • Enhanced Understanding of Pharmaceutical Materials Through Advanced Characterisation and Analysis.

    abstract::The impact of pharmaceutical materials properties on drug product quality and manufacturability is well recognised by the industry. An ongoing effort across industry and academia, the Manufacturing Classification System consortium, aims to gather the existing body of knowledge in a common framework to provide guidance...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-018-1198-6

    authors: Ferreira AP,Gamble JF,Leane MM,Park H,Olusanmi D,Tobyn M

    更新日期:2018-11-01 00:00:00

  • Novel Application of Hot Melt Extrusion for the Manufacturing of Vaginal Films Containing Microbicide Candidate Dapivirine.

    abstract::Polymeric films are safe and effective and can be used for vaginal administration of microbicide drug candidates. Dapivirine (DPV), an investigational and clinically advanced antiretroviral drug, was selected as a model compound for this study. We have previously developed and clinically tested a quick-dissolving DPV ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1442-8

    authors: Regev G,Patel SK,Moncla BJ,Twist J,Devlin B,Rohan LC

    更新日期:2019-06-26 00:00:00

  • Diazepam-loaded solid lipid nanoparticles: design and characterization.

    abstract::The aim of the present study was to investigate the feasibility of the inclusion of a water-insoluble drug (diazepam, DZ) into solid lipid nanoparticles (SLNs), which offer combined advantages of rapid onset and prolonged release of the drug. This work also describes a new approach to prepare suppositories containing ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9197-2

    authors: Abdelbary G,Fahmy RH

    更新日期:2009-01-01 00:00:00

  • Application of pharmaceutical QbD for enhancement of the solubility and dissolution of a class II BCS drug using polymeric surfactants and crystallization inhibitors: development of controlled-release tablets.

    abstract::The aim of this study was to apply quality by design (QbD) for pharmaceutical development of felodipine solid mixture (FSM) containing hydrophilic carriers and/or polymeric surfactants, for easier development of controlled-release tablets of felodipine. The material attributes, the process parameters (CPP), and the cr...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-011-9646-6

    authors: Basalious EB,El-Sebaie W,El-Gazayerly O

    更新日期:2011-09-01 00:00:00

  • Percutaneous Delivery of Antihypertensive Agents: Advances and Challenges.

    abstract::Hypertension remains a significant risk factor for several cardiovascular disorders including coronary artery disease and heart failure. Despite the large armamentarium of drugs available for the management of high blood pressure, low oral availability is an ongoing challenge. Researchers are constantly developing alt...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章,评审

    doi:10.1208/s12249-019-1583-9

    authors: Ita K,Ashong S

    更新日期:2020-01-06 00:00:00

  • In vitro dissolution of generic immediate-release solid oral dosage forms containing BCS class I drugs: comparative assessment of metronidazole, zidovudine, and amoxicillin versus relevant comparator pharmaceutical products in South Africa and India.

    abstract::Biowaivers are recommended for immediate-release solid oral dosage forms using dissolution testing as a surrogate for in vivo bioequivalence studies. Several guidance are currently available (the World Health Organization (WHO), the US FDA, and the EMEA) where the conditions are described. In this study, definitions, ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-014-0135-6

    authors: Reddy NH,Patnala S,Löbenberg R,Kanfer I

    更新日期:2014-10-01 00:00:00

  • A novel fiber-optic photometer for in situ stability assessment of concentrated oil-in-water emulsions.

    abstract::The purpose of this research was to evaluate a novel fiber-optic photometer for its ability to monitor physical instabilities occurring in concentrated emulsions during storage. For this, the fiber-optic photometer was used to measure transmission of oil-in-water emulsions stabilized with hypromellose (HPMC) as a func...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt0803070

    authors: Oliczewski S,Daniels R

    更新日期:2007-08-31 00:00:00

  • Formulation and Evaluation of Naringenin Nanosuspensions for Bioavailability Enhancement.

    abstract::The clinical potential of naringenin (NRG) is compromised due to its poor aqueous solubility and low oral bioavailability. The study is aimed at addressing these issues by means of naringenin nanosuspensions (NRG-NS) formulated using polyvinylpyrrolidone (PVP K-90) as stabiliser via antisolvent sonoprecipitation metho...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0790-5

    authors: Gera S,Talluri S,Rangaraj N,Sampathi S

    更新日期:2017-11-01 00:00:00

  • Spray-Dried Succinylated Soy Protein Microparticles for Oral Ibuprofen Delivery.

    abstract::The potential value of succinylated soy protein (SPS) as a wall material for the encapsulation of ibuprofen (IBU), a model hydrophobic drug, by spray-drying was investigated. A succinylation rate of 93% was obtained for soy protein isolate, with a molar ratio of 1/1.5 (NH2/succinic anhydride). The solubility profile a...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1250-6

    authors: Anaya Castro MA,Alric I,Brouillet F,Peydecastaing J,Fullana SG,Durrieu V

    更新日期:2019-01-11 00:00:00

  • Prodrugs of theophylline incorporating ethyleneoxy groups in the promoiety: synthesis, characterization, and transdermal delivery.

    abstract::Two different types of derivatives of theophylline (Th-H) incorporating ethyleneoxy groups into the promoiety have been synthesized. One is a soft alkyl type where N-methyl-N-methoxyethyleneoxycarbonylaminomethyl chlorides have been used to alkylate Th-H in the 7 position. The other is in an acyl type where methoxyeth...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9803-6

    authors: Majumdar S,Mueller-Spaeth M,Sloan KB

    更新日期:2012-09-01 00:00:00

  • Optimization, in-vitro Release and in-vivo Evaluation of Gliquidone Nanoparticles.

    abstract::The present work embarks upon increasing the dissolution rate and the bioavailability of model anti-diabetic drug, gliquidone, a sulfonylurea class drug used for treating diabetes mellitus type 2. The gliquidone nanoparticles were prepared by using anti-solvent precipitation technique in which, gliquidone solution in ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1577-7

    authors: Mohamed MS,Abdelhafez WA,Zayed G,Samy AM

    更新日期:2019-12-26 00:00:00

  • In situ forming formulation: development, evaluation, and optimization using 3(3) factorial design.

    abstract::The present investigation concerns with the development and optimization of an in situ forming formulation using 3(3) full factorial design experimentation. Metformin, an antidiabetic drug with upper part of gastrointestinal tract as absorption window was used as a model drug. The formulations were designed with an ob...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-009-9285-3

    authors: Nagarwal RC,Srinatha A,Pandit JK

    更新日期:2009-01-01 00:00:00

  • Modeling of the Nanoparticles Absorption Under a Gastrointestinal Simulated Ambient Condition.

    abstract::Proanthocyanidins (PAs) have several bioactivities, but they are unstable in the digestive tract and possess low bioavailability. Nanoencapsulation stabilizes these compounds for oral administration. The intestinal absorption of grape seed and skin extracts, and the poly-lactic acid (PLA) nanoparticles loaded with suc...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0751-z

    authors: Fernández K,Roeckel M,Canales E,Dumont J

    更新日期:2017-10-01 00:00:00

  • Formulation and development of floating capsules of celecoxib: in vitro and in vivo evaluation.

    abstract::The objective of the present study was to develop a hydrodynamically balanced system for celecoxib as single-unit floating capsules. Various grades of low-density polymers were used for formulation of these capsules. The capsules were prepared by physical blending of celecoxib and the polymer in varying ratios. The fo...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt0804119

    authors: Ali J,Arora S,Ahuja A,Babbar AK,Sharma RK,Khar RK

    更新日期:2007-12-28 00:00:00

  • Melt Extrusion for a High Melting Point Compound with Improved Solubility and Sustained Release.

    abstract::The objective of the current study was to develop an amorphous solid dispersion for a high melting point compound, griseofulvin (GRF), with an enhanced solubility and a controlled release pattern utilizing hot melt extrusion (HME) technology. Hypromellose acetate succinate (HPMCAS, Shin-Etsu AQOAT®, medium particle si...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0846-6

    authors: Lu J,Obara S,Liu F,Fu W,Zhang W,Kikuchi S

    更新日期:2018-01-01 00:00:00

  • Eco-Friendly Tadalafil Surfactant-Free Dry Emulsion Tablets (SFDETs) Stabilized by In Situ Self-Assembled Aggregates of Natural Oil and Native Cyclodextrins.

    abstract::The main principles of green chemistry and engineering were extended to pharmaceutical formulations to prepare eco-friendly surfactant-free dry emulsion tablets (SFDETs) devoid of solvents or synthetic surfactants. Surfactant-free emulsions were stabilized by in situ cyclodextrins/sweet almond oil inclusion complexes ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-019-1450-8

    authors: Badr-Eldin SM,Labib GS,Aburahma MH

    更新日期:2019-07-18 00:00:00

  • Silymarin-Loaded Eudragit Nanoparticles: Formulation, Characterization, and Hepatoprotective and Toxicity Evaluation.

    abstract::The objectives of this study were to formulate, characterize silymarin-loaded Eudragit nanoparticles (SNPs) and evaluate their hepatoprotective and cytotoxic effects after oral administration. SNPs were prepared by nanoprecipitation technique and were evaluated for particle size, entrapment efficiency, TEM, solid-stat...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0799-9

    authors: El-Nahas AE,Allam AN,Abdelmonsif DA,El-Kamel AH

    更新日期:2017-11-01 00:00:00

  • Product Quality Research Institute evaluation of cascade impactor profiles of pharmaceutical aerosols. Part 3. Final report on a statistical procedure for determining equivalence.

    abstract::The purpose of this article is to report final results of the evaluation of a chi-square ratio test proposed by the US Food and Drug Administration (FDA) for demonstrating equivalence of aerodynamic particle size distribution (APSD) profiles of nasal and orally inhaled drug products. A working group of the Product Qua...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/pt0804090

    authors: Christopher D,Adams W,Amann A,Bertha C,Byron PR,Doub W,Dunbar C,Hauck W,Lyapustina S,Mitchell J,Morgan B,Nichols S,Pan Z,Singh GJ,Tougas T,Tsong Y,Wolff R,Wyka B

    更新日期:2007-11-02 00:00:00

  • EGFR Targeted Paclitaxel and Piperine Co-loaded Liposomes for the Treatment of Triple Negative Breast Cancer.

    abstract::Triple-negative breast (TNBC) cancer that is upregulated with epidermal growth factor receptor (EGFR), and devoid of both the hormonal receptors and epidermal growth factor receptor 2 (HER 2), has led to a concept of treating TNBC with EGFR-targeted therapeutics. The combination of paclitaxel (PTX) and piperine (PIP) ...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-020-01671-7

    authors: Burande AS,Viswanadh MK,Jha A,Mehata AK,Shaik A,Agrawal N,Poddar S,Mahto SK,Muthu MS

    更新日期:2020-05-21 00:00:00

  • Transungual Gel of Terbinafine Hydrochloride for the Management of Onychomycosis: Formulation, Optimization, and Evaluation.

    abstract::The present study was aimed to optimize, develop, and evaluate microemulsion and microemulsion-based gel as a vehicle for transungual drug delivery of terbinafine hydrochloride for the treatment of onychomycosis. D-optimal mixture experimental design was adopted to optimize the composition of microemulsion having amou...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-017-0711-7

    authors: Thatai P,Sapra B

    更新日期:2017-08-01 00:00:00

  • Evaluation of a new wireless Temperature Remote Interrogation System (TEMPRIS) to measure product temperature during freeze drying.

    abstract::The purpose of this research was to evaluate a new wireless and battery-free sensor technology for invasive product temperature measurement during freeze-drying. Product temperature is the most critical process parameter in a freeze-drying process, in particular during primary drying. The product temperature over time...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-008-9099-8

    authors: Schneid S,Gieseler H

    更新日期:2008-01-01 00:00:00

  • Physicochemical investigations and stability studies of amorphous gliclazide.

    abstract::Gliclazide (GLI), a poorly water-soluble antidiabetic, was transformed into a glassy state by melt quench technique in order to improve its physicochemical properties. Chemical stability of GLI during formation of glass was assessed by monitoring thin-layer chromatography, and an existence of amorphous form was confir...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-012-9760-0

    authors: Jondhale S,Bhise S,Pore Y

    更新日期:2012-06-01 00:00:00

  • Use of Risk Assessment and Plackett-Burman Design for Developing Resveratrol Spray-Dried Emulsions: a Quality-by-Design Approach.

    abstract::In this study, the resveratrol spray-dried emulsions were developed using a quality-by-design approach. Further, the product and process factors that affected the quality of the spray-dried emulsions were analyzed and illustrated using an Ishikawa diagram. The product and process risks were prioritized using a risk-ra...

    journal_title:AAPS PharmSciTech

    pub_type: 杂志文章

    doi:10.1208/s12249-018-1220-z

    authors: Benjasirimongkol P,Piriyaprasarth S,Moribe K,Sriamornsak P

    更新日期:2018-12-18 00:00:00