Abstract:
PURPOSE:The aim of this study was to evaluate the 6-year effectiveness of maxillary and mandibular full-arch immediately loaded prostheses fabricated using an intraoral welding technique. METHODS:All patients received the same day of surgery a fixed, full-arch prosthesis supported by an intraorally welded titanium framework created directly in the patient's mouth using a titanium bar. Life table analysis of implant survival, complications, and any other adverse events were recorded at yearly follow-up for a period of 6 years. RESULTS:One hundred twenty-four (86.11%) of 144 implants placed in maxillary cases and 87 (77.68%) of 112 implants placed in mandible cases completed the planned 6-year follow-up. At the 72-month follow-up, the accumulated mean marginal bone loss was, respectively, 1.39 mm (SD = 0.67) for the implants placed in the maxilla (n = 124) and 1.29 mm (SD = 0.71) for the implants placed in the mandible (n = 87). Fracturing of the composite resin superstructure was the most common adverse event. CONCLUSIONS:After a 6-year follow-up period, the intraoral welding technique proved to be a predictable technique for successfully rehabilitating the fully edentulous patient with a fixed and immediate prosthesis.
journal_name
Implant Dentjournal_title
Implant dentistryauthors
Degidi M,Nardi D,Piattelli Adoi
10.1097/ID.0b013e31829261edsubject
Has Abstractpub_date
2013-06-01 00:00:00pages
224-31issue
3eissn
1056-6163issn
1538-2982journal_volume
22pub_type
杂志文章abstract::Currently, the preparation of surgical templates is a multistage process that engages the restorative dentist, dental laboratory, and external computed tomography center. This new method for production of templates and guides, as well as data transfer protocol, significantly simplifies commonly used methods and remove...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e31820fb47f
更新日期:2011-04-01 00:00:00
abstract::The aim of this study is to present the clinical data from the use of implants that were placed and restored in four independent private dental offices. In part I, the survival rate was calculated and the failure causes were associated with some potential risk factors. In part II, the surgical and prosthetic complicat...
journal_title:Implant dentistry
pub_type: 杂志文章,多中心研究
doi:10.1097/01.id.0000148564.88384.de
更新日期:2004-12-01 00:00:00
abstract:OBJECTIVE:We designed to determine the variables that influence the adoption rate of implant technology amongst Canadian dentists. METHODS AND MATERIAL:In this cross-sectional study, an anonymous survey questionnaire was sent to all licensed Canadian dentists, both general practitioners and specialists. A 3-part quest...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e318200315e
更新日期:2011-02-01 00:00:00
abstract:PURPOSE:The aim of this study was to evaluate the bacterial seal at the implant-hybrid zirconia abutment interface and Morse taper-type connections through in vitro microbiological analysis. MATERIALS AND METHODS:Sixteen implants and their respective abutments were divided into 3 groups: test (10 sets), positive contr...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000533
更新日期:2017-04-01 00:00:00
abstract:PURPOSE:To compare hard- and soft-tissue changes around immediate implants connected with 2 types of healing abutments during the early phases of healing. MATERIALS AND METHODS:Twenty-eight immediate implants were placed into molar/premolar sockets through a modified osteotomy method. The gaps around implants were gra...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000809
更新日期:2018-12-01 00:00:00
abstract:PURPOSE AND OBJECTIVE:The aim of this in vitro study was to investigate the ability of epithelial cells to attach to or proliferate on various mechanical or chemical surface treatments of an implant provisional material. MATERIALS AND METHODS:Polyethyl methacrylate discs 10 mm in diameter and ∼0.2 to 0.75 mm in width ...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000538
更新日期:2017-02-01 00:00:00
abstract:PURPOSE:To evaluate, in vitro, the leakage observed in internal hexagon and Morse taper implant-abutment connections. MATERIALS:Ten specimens with internal hexagon and 10 with Cone Morse connection were used. The inner parts of 5 implants, per group, were inoculated with Pseudomonas aeruginosa (PS) suspension and 5 im...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e31825cd472
更新日期:2012-08-01 00:00:00
abstract:PURPOSE:The aim of this work was to compare histologically bone biopsies obtained during dental implant placement in atrophic jaws reconstructed with fresh-frozen bone (FFB) or autologous bone blocks. MATERIALS AND METHODS:Twenty partially or totally edentulous patients were treated either with iliac crest FFB grafts ...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000451
更新日期:2016-12-01 00:00:00
abstract::Today, the sinus floor elevation procedure is not only being used on a routine basis, but clinicians are reporting high success rates. The sinus floor graft has become an important option in the treatment of the edentulous posterior maxilla, where vertical bone height is less than ideal. A review of maxillary sinus fl...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/01.id.0000220550.27164.74
更新日期:2006-06-01 00:00:00
abstract:PURPOSE:The association of doxycycline (DOX) and autogenous bone on repair of critical-size defects was evaluated. MATERIALS AND METHODS:Fifty albino rats were divided into 5 groups (n = 10). A 5-mm diameter defect was treated with: control (CO)-blood clot; DOX in Natrosol (NAT)-10% gel; NAT-gel; particulate autogenou...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000783
更新日期:2018-08-01 00:00:00
abstract:PURPOSE:The aim of this study was to investigate whether bioactive surfaces were more favorable to bone than bioinert surfaces by evaluating bone responses around two commercial dental implants. MATERIALS AND METHODS:Bioactive fluoride-modified implants (Osseospeed) were compared with bioinert oxidized implants (TiUni...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e318249f283
更新日期:2012-04-01 00:00:00
abstract:PURPOSE:The purpose of this split-mouth controlled study was to evaluate and compare the amount of vital bone after lateral sinus lift surgery using either a mixture of pure platelet concentrate and deproteinized bovine bone mineral (test group) or solely deproteinized bovine bone as grafting material (control group). ...
journal_title:Implant dentistry
pub_type: 临床试验,杂志文章
doi:10.1097/ID.0000000000000293
更新日期:2015-10-01 00:00:00
abstract:PURPOSE:To evaluate the outcome of treatment in the rehabilitation of edentulous jaws with early loaded full-arch screw-retained prostheses after up to 4 years of function. METHODS:Patients with completely edentulous maxillae and/or mandibles, or presenting natural teeth with a poor or hopeless prognosis, received 6 i...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e31825885e0
更新日期:2012-08-01 00:00:00
abstract::Placement of endosseous implants and inferior alveolar nerve transposition is a treatment option for patients with an edentulous posterior mandible with inadequate bone height superior to the inferior alveolar canal. Complications associated with these procedures include infection, prolonged neurosensory disturbances,...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/01.id.0000078232.90185.82
更新日期:2003-01-01 00:00:00
abstract::The conventional soft tissue conditioning technique around implant demands time and effort for optimizing soft tissue contour. This article describes an alternative technique for achieving proper emergence profile with a custom-milled titanium abutment, interim restoration, and surgical intervention. With this techniq...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000339
更新日期:2015-12-01 00:00:00
abstract:OBJECTIVES:Acidic pH and high fluoride (F(-)) concentration impair the corrosion resistance of titanium (Ti). Caries-preventive products contain high amounts of F(-) and are applied at low pH. The purpose of this study was to evaluate whether fluoride applied in different forms has different short-, mid-, and long-term...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000294
更新日期:2015-12-01 00:00:00
abstract:PURPOSE:A literature search was performed in a number of health care databases for articles published until January 2018. DISCUSSION:A number of anatomical factors, risk indicators, possible aesthetic complications, and financial implications have to be taken into consideration before treatment commences. When diagnos...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000869
更新日期:2019-04-01 00:00:00
abstract:OBJECTIVE:To perform a topographical characterization of a titanium alloy subjected to different surface treatments using roughness evaluation, scanning electron microscopy, and atomic force microscopy. MATERIALS AND METHODS:For each group, 6 discs of a titanium alloy had their surfaces modified by 4 treatments. All s...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e3182566e19
更新日期:2012-06-01 00:00:00
abstract::Most endosseous implant systems are placed using a two-stage surgical procedure. The surgical stages are separated by a period of 4 to 6 months to allow osseointegration. At Stage-I surgery, the implant is fixed in bone and submerged under mucosa, while at Stage-II surgery, the implant is exposed and the transmucosal ...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/00008505-199807030-00009
更新日期:1998-01-01 00:00:00
abstract:OBJECTIVE:A recent study demonstrated that UV treatment of titanium implants (photofunctionalization) enabled a higher level of osseointegration by establishing a 98.2% bone-implant contact (BIC) as opposed to a 53.0% BIC around untreated implants. This study examined whether, and how, the BIC increase affects the peri...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e31827b9415
更新日期:2013-02-01 00:00:00
abstract:PURPOSE:Autogenous bone has been used with success as implants in intrabony defects, because of its biological advantages and osteogenic potential. The objective of this study was to evaluate histological and histometrically the bony repair in intrabony defects after dental extractions in rats with graft of a combinati...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e31815705a5
更新日期:2007-12-01 00:00:00
abstract:STATEMENT OF PROBLEM:Evidence is limited on the efficacy of narrow-diameter implants (NDIs) in the posterior jaw. PURPOSE:The purpose of this systematic review was to assess the survival of NDIs and provide guidelines for their safe use. MATERIALS AND METHODS:Electronic search of the English-language literature enric...
journal_title:Implant dentistry
pub_type: 杂志文章,评审
doi:10.1097/ID.0000000000000238
更新日期:2015-06-01 00:00:00
abstract:OBJECTIVE:To use a modified direct contact test (DCT) to evaluate the bacterial growth on 3 commercially available implants. MATERIALS AND METHODS:Streptococcus salivarius growth was tested on 1 machined surface and 2 commercial rough surface implants. Seven implants from each group were fixed to the cover of a 96-wel...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000697
更新日期:2017-12-01 00:00:00
abstract:PURPOSE:The purpose of this study is the investigation of the application of implant-supported prosthetic restorations using 2 implants supporting a fixed prosthesis during the physical growth and the development period of growing pigs. MATERIALS AND METHODS:This study was carried out on 6 male farm pigs (1 as a contr...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/01.id.0000243323.11666.38
更新日期:2006-12-01 00:00:00
abstract::Immediate loading of oral implants has been extensively described in the international literature and the requirements for long-term success are evaluated. The author presents here the critical aspects of the criteria for success as well as describes the characteristics of an implant macro- and microdesign for immedia...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e3181991248
更新日期:2009-06-01 00:00:00
abstract:BACKGROUND:For fixed prostheses, retention is one of the most important factors for clinical success. It is unknown whether grooves that increase surface area of implant abutment while retaining the diameter and wall height provide greater uniaxial retention force. The purpose of this study was to determine the retenti...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e318225f68e
更新日期:2011-10-01 00:00:00
abstract::Primary stability of dental implants is mandatory for their osseointegration. A method is described that allows objective measurements of implant displacement in bone sites during lateral loading. Ten samples of bovine bone (2 cm x 2 cm) with bone type II, III, and IV according to Lekholm and Zarb were used for the ex...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/01.id.0000116457.03989.01
更新日期:2004-03-01 00:00:00
abstract::The biologic principle of guided bone regeneration has been successfully used to prevent bone loss in extraction sites. This study comprises 420 cases of alveolar ridge maintenance in preparation for dental implant placements. Nonexpanded polytetrafluoroethylene membranes were positioned over all extraction sites and ...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0b013e3181cda72c
更新日期:2010-02-01 00:00:00
abstract:INTRODUCTION:The aim of this study was to evaluate the outcome of fresh-frozen bone allografts in preprosthetic surgery for implant placement purposes. MATERIALS AND METHODS:The cohort comprised 45 patients treated with fresh-frozen bone block grafts and dental implants. Clinical and radiological evaluations were perf...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000412
更新日期:2016-06-01 00:00:00
abstract:OBJECTIVES:To investigate whether a different implant geometry with the same potential contact surface area (PCSA) affects the principal stress and strains in bone. MATERIAL AND METHODS:Three-dimensional finite-element models were created with a single endosseous implant embedded in bone. The irregular (IR) dental roo...
journal_title:Implant dentistry
pub_type: 杂志文章
doi:10.1097/ID.0000000000000662
更新日期:2017-10-01 00:00:00