Effects of Implant Angulation and Impression Coping Type on the Dimensional Accuracy of Impressions.

Abstract:

PURPOSE:To analyze the accuracy of impressions in relation to implant angulation and type of impression coping. MATERIALS AND METHODS:Three metal master models with 2 implants of 3 different angulations (parallel, mesiodistal, and buccolingual) were fabricated. Nine groups of experimental models were fabricated to duplicate the 3 master models using 3 types of impression copings: transfer, pick-up, and hybrid. The distance between the analogs for each model was measured using a video measuring system. The influence of angulation and type of impression coping was analyzed by a two-way ANOVA (P < 0.05). RESULTS:There were significant differences in error rates in relation to implant angulation and type of impression coping (P < 0.05). Impressions of buccolingually divergent implants with transfer copings showed statistically higher error rates than other groups (P < 0.05). CONCLUSIONS:Buccolingual divergence can be a variable that influences the impression accuracy of transfer copings compared with pick-up and hybrid copings. Hybrid copings demonstrate reasonable reproducibility similar to that of pick-up copings.

journal_name

Implant Dent

journal_title

Implant dentistry

authors

Shim JS,Ryu JJ,Shin SW,Lee JY

doi

10.1097/ID.0000000000000336

subject

Has Abstract

pub_date

2015-12-01 00:00:00

pages

726-9

issue

6

eissn

1056-6163

issn

1538-2982

journal_volume

24

pub_type

杂志文章
  • The influence of titanium surfaces in cultures of neonatal rat calvarial osteoblast-like cells: an immunohistochemical study.

    abstract:BACKGROUND:The goal of this present study was to evaluate the behavior of neonatal rat calvarial osteoblast-like cells cultured on different implant surfaces. MATERIALS:Sandblasted acid-etched (SLA) surfaces of 2 different companies with different alloy properties were used. These were named as SLA-1 and SLA-2. The os...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e31818c5bd8

    authors: Aybar B,Emes Y,Atalay B,Tanrikulu S,Kaya AS,Işsever H,Ceyhan T,Bilir A

    更新日期:2009-02-01 00:00:00

  • Fixed prosthodontics in skeletal Class III patients with partially edentulous jaws and age-related prognathism: the basal osseointegration procedure.

    abstract::Today, prognathism in the partially or completely edentulous jaw can be treated with endosteal implants and fixed prostheses. The preferred procedure uses basal osseointegration. If the distribution of available bone is favorable, the prosthodontic suprastructures can be loaded early, taking the various phases of bone...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/00008505-199903000-00005

    authors: Ihde SK

    更新日期:1999-01-01 00:00:00

  • Mini-lateral windows for minimally invasive maxillary sinus augmentation: case series of a new technique.

    abstract:OBJECTIVES:The purpose of this article was to introduce a new technique for minimally invasive lateral window sinus augmentation, developed to maximize the amount of residual lateral wall after the procedure. MATERIALS AND METHODS:Fourteen consecutive patients requiring maxillary sinus augmentation by a lateral approa...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000119

    authors: Pariente L,Dada K,Daas M

    更新日期:2014-08-01 00:00:00

  • Comparison of 3 luting agents on retention of implant-supported crowns on 2 different abutments.

    abstract:BACKGROUND:For fixed prostheses, retention is one of the most important factors for clinical success. It is unknown whether grooves that increase surface area of implant abutment while retaining the diameter and wall height provide greater uniaxial retention force. The purpose of this study was to determine the retenti...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e318225f68e

    authors: Güncü MB,Cakan U,Canay S

    更新日期:2011-10-01 00:00:00

  • Sinus Elevation Through Transcrestal Window Approach and Delayed Implant Placement in 1- to 2-mm Residual Alveolar Bone: A Case Report.

    abstract::Sinus augmentation with a lateral window technique and delayed implant placement are the traditional treatment schedules when the residual alveolar bone height in atrophic posterior maxilla is less than 5 mm. This article presents a transcrestal window approach (TWA) to replace a missing first molar in an atrophic pos...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000503

    authors: Wang M,Yan M,Xia H,Zhao Y

    更新日期:2016-12-01 00:00:00

  • Dental Implant Thread Design and the Consequences on Long-Term Marginal Bone Loss.

    abstract:AIM:The aim of this study was to present the implant macrostructure effect on marginal bone loss using 3 dental implant thread designs with differences in thread pitch, lead, and helix angle. All implants used were sourced from the same company and had the same microstructured surface. MATERIALS AND METHODS:This is a ...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000441

    authors: Ormianer Z,Matalon S,Block J,Kohen J

    更新日期:2016-08-01 00:00:00

  • Dental implants osteogenic properties evaluated by cDNA microarrays.

    abstract:OBJECTIVE:This study aims at applying cDNA microarray analysis in vitro for establishing and comparing the osteogenic properties of dental implants with different surface characteristics. MATERIALS AND METHODS:Saos-2 osteoblasts were cultured in bottom-cone tubes in presence of 5 different dental implants with various...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e318225f22b

    authors: Baldi D,Longobardi M,Cartiglia C,La Maestra S,Pulliero A,Bonica P,Micale RT,Menini M,Pera P,Izzotti A

    更新日期:2011-08-01 00:00:00

  • Microstructural and topographical characterization of different surface treatments of a surgical titanium alloy for dental implants.

    abstract:OBJECTIVE:To perform a topographical characterization of a titanium alloy subjected to different surface treatments using roughness evaluation, scanning electron microscopy, and atomic force microscopy. MATERIALS AND METHODS:For each group, 6 discs of a titanium alloy had their surfaces modified by 4 treatments. All s...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e3182566e19

    authors: Carimo Marino LA,Deliberador TM,Zielak JC,Correr GM,Giovanini AF,Gonzaga CC

    更新日期:2012-06-01 00:00:00

  • The influence of the attachment type and implant number supporting mandibular overdentures on stress distribution: an in vitro study, part I.

    abstract:OBJECTIVES:The main goal of this study was to compare the stress distribution of mandibular overdentures (OVD) with different numbers of supporting implants and single versus splinted attachment types. MATERIALS AND METHODS:Four different biting situations were simulated for the 2-, 3-, and 4-implant retentive anchor ...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e31827774ee

    authors: Arat Bilhan S,Bilhan H,Bozdag E,Sunbuloglu E,Baykasoglu C,Kutay O

    更新日期:2013-02-01 00:00:00

  • Quality of Life of Implant-Supported Overdenture and Conventional Complete Denture in Restoring the Edentulous Mandible: A Systematic Review.

    abstract:OBJECTIVE:The aim of this systematic review was to evaluate the oral health-related quality of life (OHRQoL) associated with an implant-supported overdenture (IOD) compared with a conventional complete denture (CCD) in restoring the edentulous mandible. METHODS:A literature search was performed in the MEDLINE (through...

    journal_title:Implant dentistry

    pub_type: 杂志文章,评审

    doi:10.1097/ID.0000000000000668

    authors: Zhang L,Lyu C,Shang Z,Niu A,Liang X

    更新日期:2017-12-01 00:00:00

  • Tissue compatibility to different surfaces of dental implants: in vitro studies.

    abstract::Factors affecting cell and tissue responses to dental implant biomaterials are typically characterized as spatial and temporal. Spatially, a dental implant must form an interface with both bone tissue for the development and maintenance of biomechanical stability and soft tissue for the prevention of microbial infecti...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/00008505-199807040-00012

    authors: Keller JC

    更新日期:1998-01-01 00:00:00

  • Provisional implants: surgical and prosthetic aspects.

    abstract::Although numerous technological advances have improved the ability of implant practitioners to successfully reconstruct dental implants, providing patients with teeth during the immediate postsurgical period has remained problematic. One solution has been the development of temporary implants. Such provisional implant...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/00008505-200104000-00007

    authors: Babbush CA

    更新日期:2001-01-01 00:00:00

  • In Vitro Microbiological Analysis of Bacterial Seal in Hybrid Zirconia Abutment Tapered Connection.

    abstract:PURPOSE:The aim of this study was to evaluate the bacterial seal at the implant-hybrid zirconia abutment interface and Morse taper-type connections through in vitro microbiological analysis. MATERIALS AND METHODS:Sixteen implants and their respective abutments were divided into 3 groups: test (10 sets), positive contr...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000533

    authors: Harlos MM,Bezerra da Silva T,Peruzzo DC,Napimoga MH,Joly JC,Martinez EF

    更新日期:2017-04-01 00:00:00

  • Accuracy of interchangeable implant impression systems: an in vitro pilot study.

    abstract:PURPOSE:To evaluate the accuracy of impressions on changing the implant component (coping and abutment replica) between Brånemark and BIOMET 3i and between Straumann and Allfit. MATERIALS AND METHODS:Two master casts were constructed, one containing pair of Brånemark self-tap Mk II fixtures (Nobel Biocare) labeled Mas...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000231

    authors: AlFarraj Aldosari AM,AlBaker AM,AlShihri AA,AlJadeed MI,AlBwardi LA,Anil S

    更新日期:2015-06-01 00:00:00

  • Evaluation of impression accuracy for implant at various angulations.

    abstract:PURPOSE:The purpose of this study was to compare 2 splinted impression transfer techniques for implant-supported prostheses. MATERIALS:A metal matrix (control) with 4 implants was used. The implants were positioned at 90, 80, 75, and 65 degrees in relation to the surface of the matrix. Squared impression copings were ...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e3181cd715f

    authors: Assunção WG,Britto RC,Ricardo Barão VA,Delben JA,dos Santos PH

    更新日期:2010-04-01 00:00:00

  • A model to evaluate bone substitutes for immediate implant placement.

    abstract::A calcified alloplast was evaluated as a gap-filling material around implants placed immediately into fresh extraction sockets. Periodontal measurements and computed tomography scans were obtained to evaluate the clinical effectiveness of the alloplast when compared with demineralized freeze-dried bone. To determine w...

    journal_title:Implant dentistry

    pub_type: 临床试验,杂志文章

    doi:10.1097/00008505-200107000-00016

    authors: Glickman RS,Bae R,Karlis V

    更新日期:2001-01-01 00:00:00

  • Immediate implant placement without bone grafting: a retrospective study of 110 cases with 5 years of follow-up.

    abstract:PURPOSE:Immediate implant placement not only reduces the number of surgeries necessary but also decreases the treatment time and treatment costs. The purpose of the study was to present the clinical results of 110 cases of immediate implant placement without using graft materials at the end of 5 years. MATERIALS AND M...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e31828edd02

    authors: Atalay B,Öncü B,Emes Y,Bultan Ö,Aybar B,Yalçin S

    更新日期:2013-08-01 00:00:00

  • Clinical and histologic outcomes after the use of a novel allograft for maxillary sinus augmentation: a case series.

    abstract:PURPOSE:To document the clinical and histologic outcomes of sinus augmentation using a novel allogenic bone substitute as a sole grafting material. MATERIALS:Patients in need of sinus augmentation before implant placement were recruited for this study. Sinus augmentation procedures were performed following a lateral a...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e3181e59b32

    authors: Avila G,Neiva R,Misch CE,Galindo-Moreno P,Benavides E,Rudek I,Wang HL

    更新日期:2010-08-01 00:00:00

  • Fixed partial dentures and crowns supported by very small diameter dental implants in compromised sites.

    abstract::Very small diameter (1.8-3.3 mm) dental implants may be successfully used to support fixed partial dentures in edentulous sites of compromised bone width or length. Very small implants can be successfully used in highly selected sites where there is adequate bone density and bone volume for immediate implant stability...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e31817776cf

    authors: Flanagan D

    更新日期:2008-06-01 00:00:00

  • Risk factors and management of dehiscent wounds in implant dentistry.

    abstract::Successful implant dentistry is based on adequate training, proper selection of patients, careful surgery, preplanned restorations, and postoperative and supportive care. Although implant therapy is highly successful and predictable, it is not without possible early and/or late complications. The aim of this article i...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/01.id.0000127518.60701.a1

    authors: Sadig W,Almas K

    更新日期:2004-06-01 00:00:00

  • Iliac Crest Fresh-Frozen Allografts Versus Autografts in Oral Pre-Prosthetic Bone Reconstructive Surgery: Histologic and Histomorphometric Study.

    abstract:PURPOSE:The aim of this work was to compare histologically bone biopsies obtained during dental implant placement in atrophic jaws reconstructed with fresh-frozen bone (FFB) or autologous bone blocks. MATERIALS AND METHODS:Twenty partially or totally edentulous patients were treated either with iliac crest FFB grafts ...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000451

    authors: Dellavia C,Giammattei M,Carmagnola D,Musto F,Canciani E,Chiapasco M

    更新日期:2016-12-01 00:00:00

  • Effects of Food Texture on Three-Dimensional Loads on Implants During Mastication Based on In Vivo Measurements.

    abstract:INTRODUCTION:The mechanisms by which the loads exerted on implants that support prostheses are modulated during mastication remain unclear. The purpose of this study was to evaluate the effects of food texture on 3-dimensional loads measured at a single implant using a piezoelectric transducer. MATERIALS AND METHODS:T...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000443

    authors: Yoda N,Ogawa T,Gunji Y,Vanegas JR,Kawata T,Sasaki K

    更新日期:2016-08-01 00:00:00

  • Bone block allograft impregnated with bone marrow aspirate.

    abstract:PURPOSE:To evaluate the influence of bone marrow aspirate when added to bone block allograft to repair osseous defects. BACKGROUND:Bone-marrow aspirate has been combined with xenograft and allograft particulate material and has produced a significant quantity of new bone growth. However, the use of allograft bone bloc...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0b013e31815c8ef4

    authors: Soltan M,Smiler D,Prasad HS,Rohrer MD

    更新日期:2007-12-01 00:00:00

  • Sinus Floor Augmentation With Ambient Blood and an Absorbable Collagen Sponge: A Prospective Pilot Clinical Study.

    abstract:PURPOSE:The aim of this study was to clinically, radiologically, and histologically evaluate a sinus augmentation technique using a resorbable collagen sponge to maintain space between the Schneiderian membrane and the residual crestal bone. MATERIALS AND METHODS:Patients with partially edentulous maxillae were clinic...

    journal_title:Implant dentistry

    pub_type: 临床试验,杂志文章

    doi:10.1097/ID.0000000000000631

    authors: Berberi A,Nader N,Bou Assaf R,Fayyad-Kazan H,Khairalah S,Moukarzel N

    更新日期:2017-10-01 00:00:00

  • A Comparative Study of Stability After the Installation of 2 Different Surface Types of Implants in the Maxillae of Dogs.

    abstract:PURPOSE:This study was performed to investigate the histologic and histomorphometric findings of 2 different types of implant. MATERIALS AND METHODS:Resorbable blasting media (RBM) and sandblasted with larger grit and acid etched (SLA) surfaced implants (24 fixtures in each group) were installed in posterior maxilla o...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000292

    authors: Im JH,Kim SG,Oh JS,Lim SC

    更新日期:2015-10-01 00:00:00

  • Knowledge, attitudes, and perceptions of undergraduate dental students toward dental implants--an all India survey.

    abstract:PURPOSE:This study aims to gauge the knowledge and perceptions of undergraduate dental students or residents toward dental implants. MATERIALS AND METHODS:The dental colleges in India were divided into 5 zones, and by random selection method, 7 colleges were selected from each zone. Thus, a total of 35 dental institut...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000184

    authors: Chaudhary S,Gowda TM,Kumar TA,Mehta DS

    更新日期:2015-04-01 00:00:00

  • Simplified technique for immediate implant insertion into extraction sockets: report of technique and preliminary results.

    abstract::A technique is presented for placement of implants at the time of tooth extraction in the precisely desired positions, regardless of extraction socket morphology. To date, 162 implants have been placed utilizing this technique. One was mobile at uncovery and removed. The other implants have been successfully in functi...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/00008505-200201000-00018

    authors: Fugazzotto PA

    更新日期:2002-01-01 00:00:00

  • Reliability of panoramic radiography in determination of neurosensory disturbances related to dental implant placement in posterior mandible.

    abstract:INTRODUCTION:During implantology procedures, one of the most serious complications is the damage of the inferior alveolar nerve, which may result in neurosensory disturbances (NSD). Panoramic radiographs have been considered for a primary evaluation to determine the bone height and implant-mandibular canal distance. M...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000160

    authors: Kütük N,Gönen ZB,Yaşar MT,Demirbaş AE,Alkan A

    更新日期:2014-12-01 00:00:00

  • Comparison of 2 crestal sinus floor lift techniques performed on human cadavers.

    abstract:PURPOSE:To compare the effectiveness of 2 different techniques to lift the maxillary sinus floor through a crestal approach on fresh human cadaver heads: the Intralift technique using Piezosurgery and the Summers technique using osteotomy. MATERIALS AND METHODS:Two different protocols were simulated on 11 fresh human ...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000143

    authors: Llopet J,Montaudon M,Guillaud E,Ella B

    更新日期:2014-10-01 00:00:00

  • Factors Influencing the Soft Tissue Changes Around Single Laser Microtextured Implants-Abutments in the Anterior Maxilla: A 5-Year Retrospective Study.

    abstract:PURPOSE:The aim of this study was to evaluate the possible factors that influenced the periimplant soft tissue changes around single implants-abutments with laser-microtextured surface (LMS) in the esthetic zone. MATERIALS AND METHODS:Thirty-nine units, formed by implant-abutment with LMS were studied. Variables possi...

    journal_title:Implant dentistry

    pub_type: 杂志文章

    doi:10.1097/ID.0000000000000491

    authors: Guarnieri R,Savio L,Bermonds des Ambrois A,Ippoliti S,Zuffetti F,Stefanelli LV,Di Carlo S,Pompa G

    更新日期:2016-12-01 00:00:00