Abstract：
:Acoustic scattering phenomena from complex immersed elastic shells are studied by high-speed Schlieren visualization for spark-generated spherical quasi-Dirac excitations. The situations considered are air-filled cylindrical shells under normal insonification and air-filled cylindrical shells soldered at one end with a hemispherical endcap under axial and non-axial incidences. The results are compared with those provided by the Methode d'Isolement et d'Identification des Resonances (MIIR) method and corresponding analytical theoretical solutions. The combination of these complementary approaches better highlights some of the behaviors of the symmetric S0- and antisymmetric A0-Lamb waves, as well was the Scholte-Stoneley A-wave, on the considered targets. In particular, the influence of the internal solder inhomogeneities on the creation and/or the conversion of these modes is demonstrated.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Derbesse L,Pernod P,Latard V V,Merlen A,Decultot D,Touraine N,Maze Gdoi
10.1016/s0041-624x(99)00165-1subject
Has Abstractpub_date
2000-03-01 00:00:00pages
860-3issue
1-8eissn
0041-624Xissn
1874-9968pii
S0041-624X(99)00165-1journal_volume
38pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract：:Effective receive beamforming in medical ultrasound imaging is important for enhancing spatial and contrast resolution. In current ultrasound receive beamforming, a constant sound speed (e.g., 1540m/s) is assumed. However, the variations of sound speed in soft tissues could introduce phase distortions, leading to degr...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.03.007
更新日期：2011-10-01 00:00:00
abstract：:The estimation of clamping force has been regarded as the main issue in the maintenance of high-tension bolts. This paper proposes a method which uses the dependency of ultrasonic velocity on stress based on the nonlinear elastic effect. The variation of ultrasonic velocity in the range of actual stress acting in the ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.190
更新日期：2006-12-22 00:00:00
abstract：:We study thickness-shear vibration of a quartz plate connected to two piezoelectric ceramic plates with initial deformations caused by a biasing electric field. The theory for small deformations superposed on finite biasing deformations in an electroelastic body is used. It is shown that the resonant frequencies of th...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2010.07.002
更新日期：2011-02-01 00:00:00
abstract：:Ultrasonic modes guided along the surface of a concrete block covered by a composite plate are investigated. First of all, the propagation phenomenon is studied by predicting the dispersion curves for various modes supposed to exist in this structure. Then, focus is made on a specific mode expected to be sensitive to ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.01.074
更新日期：2004-04-01 00:00:00
abstract：:The increasing number of concrete structures with symptoms of premature deterioration due to environmental action demands procedures to estimate the durability of this type of component. Concrete durability is related to porosity, which determines the intensity of interactions of the material with aggressive agents. T...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(99)00095-5
更新日期：2000-03-01 00:00:00
abstract：:Ultrasonic reflection and transmission measurements on saturated, plane-parallel, poroelastic slabs are presented. A data processing technique is proposed to obtain poroelastic parameters from transmission measurements. A special experimental data acquisition and processing technique is applied to minimize the finite ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2008.10.006
更新日期：2009-03-01 00:00:00
abstract：:The propagation of ultrasound through an austenitic weld is investigated experimentally as well as in a numerical simulation. The weld is insonified at normal incidence to the fusion line with a longitudinal contact transducer. In order to experimentally trace the ultrasound through the weld, slices of different thick...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(99)00103-1
更新日期：2000-03-01 00:00:00
abstract：:The acoustic source localization technique for anisotropic plates proposed by the authors in an earlier publication ([1] Kundu et al., 2012) is improved in this paper by adopting some modifications. The improvements are experimentally verified on anisotropic flat and curved composite plates. Difficulties associated wi...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.03.001
更新日期：2014-09-01 00:00:00
abstract：:The main component of every device used for investigating internal object structure by Ultrasound Transmission Tomography (UTT) is a special ultrasonic probe. This paper presents the structure of model multielement ring probe for examining objects using this method in divergent ray projection geometry. The probe is ma...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.05.126
更新日期：2006-12-22 00:00:00
abstract：:The effect of a weak surface, near-surface and interfacial inhomogeneity on the frequency dependence of the surface wave velocity and of the SH (shear horizontal) wave reflectivity in isotropic elastic media is studied analytically and numerically. The inhomogeneity is modeled as an infinite planar layer with continuo...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.09.001
更新日期：2007-03-01 00:00:00
abstract：:The electromagnetic acoustic transducers (EMATs) with a meander-line coil possess the capability of generating Lamb waves carrying multiple wavelengths, and the characteristics of multiple wavelengths is analyzed by developing a spatial transversal filter model for the EMAT. It is shown that the characteristics is due...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.09.003
更新日期：2014-02-01 00:00:00
abstract：:Ultrasonic non-destructive testing of polycrystalline structures can be disturbed by scattering at grain boundaries. Understanding and modeling this so-called "structural noise" is crucial for characterization as well as detection purposes. Structural noise can be considered as a fingerprint of the material under inve...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2013.06.012
更新日期：2014-01-01 00:00:00
abstract：:The acousto-optic interaction with leaky surface acoustic wave radiation into the bulk of YX-cut LiTaO(3) crystals has been investigated. The light incidence and diffraction angles corresponding to the strongest acousto-optic interaction were calculated and measured as functions of the acoustic wave frequency. The dep...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2011.12.004
更新日期：2012-07-01 00:00:00
abstract：:In this paper the study of frequency-dependent ultrasonic attenuation in strongly heterogeneous materials is addressed. To determine the attenuation accurately over a wide frequency range, it is necessary to have suitable excitation techniques. Three kinds of transmitted signals have been analysed, grouped according t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.09.007
更新日期：2016-02-01 00:00:00
abstract：:Our study aims at the creation of a numerical toolbox that describes wave propagation in samples containing internal contacts (e.g. cracks, delaminations, debondings, imperfect intergranular joints) of known geometry with postulated contact interaction laws including friction. The code consists of two entities: the co...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.07.003
更新日期：2018-01-01 00:00:00
abstract：:Based on the original combination of picosecond acoustics and diamond anvils cell, recent improvements to accurately measure hypersonic sound velocities of liquids and solids under extreme conditions are described. To illustrate the capability of this technique, results are given on the pressure and temperature depend...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2014.04.011
更新日期：2015-02-01 00:00:00
abstract：:The conventional acoustic nonlinear technique to evaluate the contact acoustic nonlinearity (CAN) at solid-solid contact interfaces (e.g., closed cracks), which uses the through-transmission of normally incident bulk waves, is limited in that access to both the inner and outer surfaces of structures for attaching puls...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2012.02.008
更新日期：2012-08-01 00:00:00
abstract：:Current medical ultrasonic scanning instrumentation permits the display of fine image detail (speckle) which does not transfer useful information but degrades the apparent low contrast resolution in the image. An adaptive two-dimensional filter has been developed which uses local features of image texture to recognize...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/0041-624x(86)90072-7
更新日期：1986-01-01 00:00:00
abstract：:Intraluminal (within the alimentary tract) thermal surgery has been shown to be a useful therapeutic option when extracorporeal focused ultrasound applicators cannot be used since their beam may not reach the target site. If plane transducers are used for the treatment of alimentary tract tumours, the applicator must ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.01.088
更新日期：2004-04-01 00:00:00
abstract：:Guided acoustic waves, such as Lamb waves, are widely applied for material characterization, sensing of liquids and the generation of streaming in liquids. There are numerical simulation tools for the prediction of their propagation near a solid-liquid boundary but a demand for complementary measurement techniques for...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2019.105955
更新日期：2019-11-01 00:00:00
abstract：:In this study, 3D finite element simulation of ultrasonically-assisted drilling is carried out to analyze the effect of ultrasonic vibrations on common difficulties existed in conventional drilling. Influence of harmonic movement of drill bit on the formation of built-up edge is experimentally evaluated and also discu...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.11.009
更新日期：2017-03-01 00:00:00
abstract：:The aim of this paper is to investigate propagation characteristics and the generation mechanism of the nonlinear lowest-order symmetric Lamb mode (S0) which propagates downslope in free elastic plates with slowly linearly varying-thickness. From theoretical analyses, in a low frequency-thickness product (fd) range, t...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2018.11.013
更新日期：2019-04-01 00:00:00
abstract：:Ultrasonic vibration cutting is an efficient cutting process for mechanical micro-machining. This process can generate intricate surface textures with different geometric characteristics. Micro-grooves/micro-channels are among the most frequently encountered micro-structures and, as such, are the focus of this paper. ...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.12.016
更新日期：2016-04-01 00:00:00
abstract：:The linear wave equation in a lossless medium is time reversible, i.e., every solution p(x, t) has a temporal mirror solution p(x, -t). Analysis shows that time reversal also holds for the lossless nonlinear wave equation. In both cases, time-reversal invariance is violated when losses are present. For nonlinear propa...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/s0041-624x(00)00020-2
更新日期：2000-09-01 00:00:00
abstract：:Electromagnetic-acoustic transducers (EMATs) consist of a magnet and a coil. They are advantageous in some non-destructive evaluation (NDE) applications because no direct contact with the specimen is needed to send and receive ultrasonic waves. However, EMATs commonly require excitation peak powers greater than 1kW an...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.02.009
更新日期：2017-07-01 00:00:00
abstract：:Sonothrombolysis is one of the most feasible methods for enhancing clot lysis with a recombinant tissue plasminogen activator (rt-PA) in cases of acute ischemic strokes. For safe and efficient clinical practices of sonothrombolysis, accurate estimation of ultrasound transmittance through the human skull is critical. P...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2017.02.012
更新日期：2017-05-01 00:00:00
abstract：:We derive a simple expression, which gives an approximate value of the Rayleigh wave velocity in an isotropic solid. This approximation is five times better than that given by Viktorov. The velocity equation can be easily inverted in order to obtain an accurate determination of the elastic constants. This procedure ca...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2006.09.006
更新日期：2007-03-01 00:00:00
abstract：:In most applications of MEMS the mechanical properties of the used materials are key parameters for the perfect working of the microsystems. Measuring bulk acoustic waves excited in MEMS structures with ultra-short laser pulses is a powerful method for the accurate and non-destructive evaluation as well as for the cha...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2004.01.049
更新日期：2004-04-01 00:00:00
abstract：:The objective of this study was to examine the potential of ultrasonic velocity as a rapid and nondestructive method to predict the dimensional stability of oak (Quercus petraea (Mattuschka) Lieblein) and chestnut (Castanea sativa Mill.) that are commonly used in flooring industry. Ultrasonic velocity, specific gravit...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2015.11.007
更新日期：2016-03-01 00:00:00
abstract：BACKGROUND:Generalized coherence factor (GCF) can be adaptively estimated from channel data to suppress sidelobe artifacts. Conventionally, Fast Fourier Transform (FFT) is utilized to calculate the full channel spectrum and suffers from high computation load. In this work, autocorrelation (AR)-based algorithm is utiliz...
journal_title：Ultrasonics
pub_type： 杂志文章
doi：10.1016/j.ultras.2016.07.015
更新日期：2016-12-01 00:00:00
