Abstract:
:The excellent mechanical, tribological and biochemical properties of diamond coatings are promising for improving orthopedic or stomatology implants. A crucial prerequisite for such applications is an understanding and control of the biological response of the diamond coatings. This study concentrates on the correlation of diamond surface properties with osteoblast behavior. Nanocrystalline diamond (NCD) films (grain size up to 200 nm, surface roughness 20 nm) were deposited on silicon substrates of varying roughnesses (1, 270 and 500 nm) and treated by oxygen plasma to generate a hydrophilic surface. Atomic force microscopy was used for topographical characterization of the films. As a reference surface, tissue culture polystyrene (PS) was used. Scanning electron microscopy and immunofluorescence staining was used to visualize cell morphological features as a function of culture time. Metabolic activity, alkaline phosphatase activity, and calcium and phosphate deposition was also monitored. The results show an enhanced osteoblast adhesion as well as increased differentiation (raised alkaline phosphatase activity and mineral deposition) on NCD surfaces (most significantly on RMS 20 nm) compared to PS. This is attributed mainly to the specific surface topography as well as to the biocompatible properties of diamond. Hence the controlled (topographically structured) diamond coating of various substrates is promising for preparation of better implants, which offer faster colonization by specific cells as well as longer-term stability.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Kalbacova M,Rezek B,Baresova V,Wolf-Brandstetter C,Kromka Adoi
10.1016/j.actbio.2009.04.020subject
Has Abstractpub_date
2009-10-01 00:00:00pages
3076-85issue
8eissn
1742-7061issn
1878-7568pii
S1742-7061(09)00173-1journal_volume
5pub_type
杂志文章abstract::Surface modification of poly(dl-lactic acid) (PLA) scaffolds has been performed using a biofunctional small peptide composed of collagen-like repetitive sequence and laminin-derived sequence (AG73-G(3)-(PPG)(5)) via hydrophobic interaction. The results of surface analysis suggest that AG73-G(3)-(PPG)(5) can be stably ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.12.001
更新日期:2010-06-01 00:00:00
abstract::Ultra-high molecular weight polyethylene (UHMWPE) is frequently employed in joint replacements because of its high biocompatibility; however, this material does not exhibit particularly strong wear performance, thus potentially reducing the longevity of such devices. Numerous techniques have been investigated to incre...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.12.007
更新日期:2012-03-01 00:00:00
abstract::This study investigated the surface characteristics, in vitro and in vivo biocompatibility of Ti-6Al-4V alloy implants incorporating strontium ions (Sr), produced by hydrothermal treatment using a Sr-containing solution, for future biomedical applications. The surface characteristics were evaluated by scanning electro...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.01.017
更新日期:2010-07-01 00:00:00
abstract:UNLABELLED:The regeneration of hyaline cartilage remains clinically challenging. Here, we evaluated the therapeutic effects of using cell-free porous poly(lactic-co-glycolic acid) (PLGA) graft implants (PGIs) along with early loading exercise to repair a full-thickness osteochondral defect. Rabbits were randomly alloca...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.09.026
更新日期:2015-12-01 00:00:00
abstract::Limited angiogenesis and epithelialization make urethral regeneration using conventional tissue-engineered grafts a great challenge. Consequently, inspired from the native urethra, bacterial cellulose (BC) and bladder acellular matrix (BAM) were combined to design a three dimensional (3D) biomimetic scaffold. The deve...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.11.026
更新日期:2020-01-15 00:00:00
abstract::Scaffold permeability is a key parameter combining geometrical features such as pore shape, size and interconnectivity, porosity and specific surface area. It can influence the success of bone tissue engineering scaffolds, by affecting oxygen and nutrient transport, cell seeding efficiency, in vitro three-dimensional ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.12.021
更新日期:2012-04-01 00:00:00
abstract::This study characterizes the cross-linking of electrospun elastin and the mechanical properties of suture-reinforced 1.5mm internal diameter electrospun tubes composed of blended polydioxanone (PDO) and soluble elastin. Several tube configurations were tested to assess the effects of reinforcement on tube mechanical p...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2007.08.001
更新日期:2008-01-01 00:00:00
abstract::The rationale for the use of polymer-ceramic composites for bone regeneration stems from the natural composition of bone, with collagen type I and biological apatite as the main organic and inorganic constituents, respectively. In the present study composite materials of PolyActive™ (PA), a poly(ethylene oxide terepht...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.10.044
更新日期:2013-03-01 00:00:00
abstract::Scaffolds for tissue engineering and regenerative medicine are usually subjected to different mechanical loads during in vitro and in vivo degradation. In this study, the in vitro degradation process of electrospun poly(L-lactide-co-glycolide) (PLGA) scaffolds was examined under continuous tensile load and compared wi...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.02.023
更新日期:2010-08-01 00:00:00
abstract::Antibiotic resistance of bacterial biofilms limits available treatment methods for implant-associated orthopaedic infections. This study evaluated the effects of applying cathodic voltage-controlled electrical stimulations (CVCES) of -1.5V and -1.8V (vs. Ag/AgCl) to coupons of commercially pure titanium (cpTi) incubat...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.11.056
更新日期:2017-01-15 00:00:00
abstract::Antimicrobial peptides (AMPs), which are produced by multicellular organisms as a defense mechanism against competing pathogenic microbes, appear to be excellent candidates for the development of novel antimicrobial agents. Amphipathicity is traditionally believed to be crucial to the de novo design or systematic opti...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.08.043
更新日期:2014-01-01 00:00:00
abstract::We report on new types of chitosan-based nanogels via an ortho ester-based linkage, used as drug carriers for efficient chemotherapy. First, we synthesized a novel diacrylamide containing ortho ester (OEAM) as an acid-labile cross-linker. Subsequently, methacrylated succinyl-chitosan (MASCS) was prepared and polymeriz...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.05.003
更新日期:2017-09-15 00:00:00
abstract::Challenges remain in the generation of heterogeneous tissues and the repairing of interfacial tissue between soft and hard tissues. The development of tissue engineering scaffolds with gradients in composition, structure, mechanical and chemical properties is essential to modulate cellular behaviors in a graded way an...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.01.003
更新日期:2012-04-01 00:00:00
abstract:UNLABELLED:ECM-based materials are appealing for tissue engineering strategies because they may promote stem cell recruitment, cell infiltration, and cell differentiation without the need to supplement with additional biological factors. Cartilage ECM has recently shown potential to be chondroinductive, particularly in...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.04.019
更新日期:2016-07-01 00:00:00
abstract::Recent phase 1 trials of embryonic stem cell and induced pluripotent stem cell (iPSCs) derived RPE transplants for the treatment of macular degeneration have demonstrated the relative safety of this process. However, there is concern over clumping, thickening, folding, and wrinkling of the transplanted RPE. To deliver...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.11.058
更新日期:2018-02-01 00:00:00
abstract::Understanding the composition of the adsorbed protein layer on a biomaterial surface is of an extreme importance as it directs the primary biological response. Direct detection using labeled proteins and indirect detection based on enzymatic assays or changes to mass, refractive index or density of a surface have been...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.05.021
更新日期:2017-07-15 00:00:00
abstract::Many steps are required to generate bone through endochondral ossification with adipose mesenchymal stromal cells (ASC), from cell isolation to in vitro monolayer expansion, seeding into scaffolds, cartilaginous differentiation and in vivo remodeling. Moreover, monolayer expansion and passaging of ASC strongly decreas...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.07.004
更新日期:2018-09-01 00:00:00
abstract:UNLABELLED:A novel kind of monodisperse mesoporous manganese silicate coated silica nanoparticle (MMSSN) as a highly efficient T1-weighted MRI contrast agent (CA) and drug carrier for cancer diagnosis and chemotherapy has been constructed by a modified "SiO2 sacrifice and in situ silicate growth" approach under a relat...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.11.036
更新日期:2016-01-01 00:00:00
abstract::Dentin contains 1-2μm diameter tubules extending from the pulp cavity to near the junction with enamel. Peritubular dentin (PTD) borders the tubule lumens and is surrounded by intertubular dentin (ITD). Differences in PTD and ITD composition and microstructure remain poorly understood. Here, a (∼200nm)(2), 10.1keV syn...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.05.027
更新日期:2014-09-01 00:00:00
abstract::Byssus fibres are tough biopolymer fibres produced by mussels to attach themselves to rocks. In this communication, we present the mechanical properties of the byssus from the South American mussel Aulacomya ater which have not been previously reported in the literature. The mechanical properties of the whole threads ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.01.014
更新日期:2008-07-01 00:00:00
abstract:UNLABELLED:Many chorioretinal diseases are chronic and need sustained drug delivery systems to keep therapeutic drug level at the disease site. Many intravitreal drug delivery systems under developing do not have mechanism incorporated for a non-invasive monitoring of drug release. The current study prepared rugate por...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.06.012
更新日期:2015-09-01 00:00:00
abstract::Antimicrobial peptides (AMPs) are currently receiving interest as an alternative to conventional antibiotics to treat biomaterial-associated infection. However, the inherent instability of such peptides often limits their efficacy in intended clinical applications. Covalent immobilization of AMPs to surfaces is one st...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.10.039
更新日期:2019-01-01 00:00:00
abstract::Cartilaginous tissues engineered using mesenchymal stem cells (MSCs) have been shown to generate bone in vivo by executing an endochondral programme. This may hinder the use of MSCs for articular cartilage regeneration, but opens the possibility of using engineered cartilaginous tissues for large bone defect repair. H...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.11.031
更新日期:2015-02-01 00:00:00
abstract::Processing silk fibroin (SF) by electrospinning offers a very attractive opportunity for producing three-dimensional nanofibrillar matrices in tubular form, which may be useful for a biomimetic approach to small calibre vessel regeneration. Bypass grafting of small calibre vessels, with a diameter less than 6mm, is pe...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.05.008
更新日期:2010-10-01 00:00:00
abstract::Substrate stiffness is emerging as an effective tool for the regulation of cell behaviours such as locomotion, proliferation and differentiation. In order to explore the potential application of this biophysical tool, material platforms displaying lateral and continuously graded stiffness are advantageous since they a...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.09.030
更新日期:2012-02-01 00:00:00
abstract:UNLABELLED:The irritation/discomfort associated with the use of contact lenses (CLs) is often related to the eyelid-lens friction. Although the use of such devices is widespread, the information about the influence of the lacrimal fluid biomolecules on the tribological behavior of the CLs hydrogels is scarce. In this w...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.08.011
更新日期:2015-10-01 00:00:00
abstract::In the U.S., 30% of adults suffer joint pain, most commonly in the knee, which severely limits mobility and is often attributed to injury of cartilage and underlying bone in the joint. Current treatment methods such as microfracture result in less resilient fibrocartilage with eventual failure; autografting can cause ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.10.016
更新日期:2018-12-01 00:00:00
abstract::CuS nanoparticles (CuSNP) are degradable, readily prepared, inexpensive to produce and efficiently cleared from the body. In this work, we explored the feasibility of CuSNP to function as degradable near infrared (NIR) nanotransducers within fibrin-based cellular scaffolds. To prepare NIR-responsive CuSNP hydrogels, f...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.08.006
更新日期:2018-09-15 00:00:00
abstract::Molecular imprinting is a technique used to create specific recognition sites on the surface of materials. Although widely developed for chromatographic separation of small molecules, this approach has not been adequately investigated for biomaterial applications. Thus, the objective of these experiments was to explor...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2007.01.003
更新日期:2007-07-01 00:00:00
abstract::The gradient localization of biological cues is of paramount importance to guide directional migration of cells. In this study, poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate)-block- poly(2-hydroxyethyl methacrylate) (P(HEMA-co-GMA)-b-PHEMA) brushes with a uniform underneath P(HEMA-co-GMA) layer and a gradi...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.05.046
更新日期:2018-07-15 00:00:00