Isoniazid-loaded chitosan/carbon nanotubes microspheres promote secondary wound healing of bone tuberculosis.

abstract：:The aim of the in vitro study was a comparison of an allogenic (ABSM) and a xenogenic bone substitute material (XBSM) with and without injectable platelet-rich fibrin (ABSM-i-PRF & XBSM-i-PRF) on cell characteristics of human osteoblasts (HOB). Here, ABSM and XBSM (+ i-PRF = test; - i-PRF = control) were incubated wit...

journal_title：Journal of biomaterials applications

authors： Kyyak S,Blatt S,Pabst A,Thiem D,Al-Nawas B,Kämmerer PW

更新日期：2020-07-01 00:00:00

abstract：:Two series of glasses of general formula (2-p) SiO2.1.1Na2O.CaO.pP2O5.xZnO (p=0.10, 0.20; x=0.0, 0.16, 0.35, and 0.78) have been analyzed for physico-chemical surface features before and after contact with simulated body fluid, morphological characteristics, and osteoblast-like cells behavior when cultured on them. Th...

journal_title：Journal of biomaterials applications

authors： Lusvardi G,Malavasi G,Menabue L,Menziani MC,Pedone A,Segre U,Aina V,Perardi A,Morterra C,Boccafoschi F,Gatti S,Bosetti M,Cannas M

更新日期：2008-05-01 00:00:00

abstract：:Type 1 diabetes mellitus is a serious disease comprising approximately 10% of all diabetes cases, and the global incidence of type 1 diabetes mellitus is steadily rising without any promise of a cure in the near future. Although islet transplantation has proven to be an effective means of treating type 1 diabetes mell...

journal_title：Journal of biomaterials applications

authors： Xu L,Guo Y,Huang Y,Xu Y,Lu Y,Wang Z

更新日期：2019-04-01 00:00:00

abstract：:This study reports the properties of tableted microparticles based on high-amylose corn starch (HACS)-pectin blend polymers as the controlled release system for diclofenac sodium (DS). HACS-pectin blend microparticles are prepared through a modified process by the spray drying technique, which is a widely used microen...

journal_title：Journal of biomaterials applications

authors： Desai KG

更新日期：2007-01-01 00:00:00

abstract：:NiTi alloy is used as a biomaterial due to its pseudoelastic behaviour. It exhibits a great potential in dental and orthopedic applications where constant correcting loads are required. In order to use such materials, it is necessary to investigate the effect of the cyclic straining upon the transformation stresses an...

journal_title：Journal of biomaterials applications

authors： Gil FJ,Planell JA

更新日期：1998-01-01 00:00:00

abstract：:Polymer biocomposites based on segmented poly(ester urethane) and extracellular matrix components have been prepared for the development of tissue engineering applications with improved biological characteristics of the materials in contact with blood and tissues for long periods. Thermal, dynamical, and dielectrical ...

journal_title：Journal of biomaterials applications

authors： Macocinschi D,Filip D,Vlad S,Cristea M,Musteata V,Ibanescu S

更新日期：2012-08-01 00:00:00

abstract：:The purpose of this study was to develop a specific targeting magnetic nanoparticle probe for magnetic resonance imaging and therapy in the form of local hyperthermia. Carboxymethyl dextran-coated ultrasmall superparamagnetic iron oxide nanoparticles with carboxyl groups were coupled to cyclic arginine-glycine-asparti...

journal_title：Journal of biomaterials applications

authors： Zheng SW,Huang M,Hong RY,Deng SM,Cheng LF,Gao B,Badami D

更新日期：2014-03-01 00:00:00

abstract：:Antenna coupling microwave plasma enables a highly oxidative treatment of the outmost surface of polypropylene (PP) nonwoven fabric within a short time period. Subsequently, grafting copolymerization with acrylic acid (AAc) makes the plasma-treated fabric durably hydrophilic and excellent in water absorbency. With hig...

journal_title：Journal of biomaterials applications

authors： Tyan YC,Liao JD,Wu YT,Klauser R

更新日期：2002-10-01 00:00:00

abstract：:The process of molecular self-assembly plays a crucial role in formulation of polymeric nanoparticulated drug delivery carriers as it creates the possibility for enhanced drug encapsulation and carrier surface engineering. This study aimed to develop a novel self-assembled polymeric micelles for targeted delivery in t...

journal_title：Journal of biomaterials applications

authors： Djurdjic B,Dimchevska S,Geskovski N,Petrusevska M,Gancheva V,Georgiev G,Petrov P,Goracinova K

更新日期：2015-01-01 00:00:00

abstract：:Hydroxyapatite (Ca10(PO4)6(OH)2) is widely investigated as an implantable material for hard tissue restoration due to its osteoconductive properties. However, hydroxyapatite in bulk form is limited as its mechanical properties are insufficient for load-bearing orthopedic applications. Attempts have been made to improv...

journal_title：Journal of biomaterials applications

authors： Yatongchai C,Placek LM,Curran DJ,Towler MR,Wren AW

更新日期：2015-11-01 00:00:00

abstract：:Osteo-odonto-keratoprostheses, incorporating dental laminate material as an anchoring skirt around a central poly(methyl methacrylate) (PMMA) optic, have been used to replace the cornea for many years. However, there are many intricacies associated with the use of autologous dental laminate material, surgical complexi...

journal_title：Journal of biomaterials applications

authors： Avadhanam V,Ingavle G,Zheng Y,Kumar S,Liu C,Sandeman S

更新日期：2020-11-11 00:00:00

abstract：:Polyelectrolyte capsules are seen as promising nanotechnology based drug delivery systems. In previous works, we have demonstrated the possibility to fabricate bio-activated surface layer containing capsules with improved features in terms of biocompatibility. In this study, we have characterized the permeability prop...

journal_title：Journal of biomaterials applications

authors： Habibi N,Pastorino L,Sandoval OH,Ruggiero C

更新日期：2013-08-01 00:00:00

abstract：:Bioimaging at a subcellular resolution to label cytoplasm and nucleus in living cell by just one photoluminescent nanoparticle has great application potential in bioresearch, preclinical diagnosis, screening, and image-guided therapy of life-threatening diseases. Herein, we report a novel arginine (Arg) functionalized...

journal_title：Journal of biomaterials applications

authors： Zhang J,Yan J,Yang Q,Yan Y,Li S,Wang L,Li C,Lei B,Yang G,He W

更新日期：2017-10-01 00:00:00

abstract：:Injectable thermo-sensitive hydrogels have a potential application in bone tissue engineering for their sensitivities and minimal invasive properties. Human dental pulp stem cells have been considered a promising tool for tissue reconstruction. The objective of this study was to investigate the proliferation and osteo...

journal_title：Journal of biomaterials applications

authors： Chen Y,Zhang F,Fu Q,Liu Y,Wang Z,Qi N

更新日期：2016-09-01 00:00:00

abstract：:An experimental and computational investigation of the self-tapping ability of carbon fibre reinforced polyetheretherketone (CFR-PEEK) has been conducted. Six CFR-PEEK suture anchor designs were investigated using PEEK-OPTIMA® Reinforced, a medical grade of CFR-PEEK. Experimental tests were conducted to investigate th...

journal_title：Journal of biomaterials applications

authors： Feerick EM,Wilson J,Jarman-Smith M,Ó'Brádaigh CM,McGarry JP

更新日期：2014-10-01 00:00:00

abstract：:A series of cellulose/soy protein isolate (SPI) sponges was prepared using a freeze-drying process. The effect of the SPI content on the structure of the sponges was characterized by Fourier transform infrared spectrometry (FT-IR), X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). It showed that...

journal_title：Journal of biomaterials applications

authors： Luo LH,Zhang YF,Wang XM,Wan Y,Chang PR,Anderson DP,Chen Y

更新日期：2010-02-01 00:00:00

abstract：:Polypropylene meshes are standard for hernia repair. Matrix metalloproteinases play a central role in inflammation. To reduce the inflammatory response and improve remodelling with an associated reduction of hernia recurrence, we modified polypropylene meshes by nanofibre coating and saturation with the broad-spectrum...

journal_title：Journal of biomaterials applications

authors： Böhm G,Groll J,Heffels KH,Heussen N,Ink P,Alizai HP,Neumann UP,Schnabel R,Mirastschijski U

更新日期：2018-05-01 00:00:00

abstract：:Mesh implants are frequently used in congenital diaphragmatic hernia. This experimental study aimed to examine the influence of different materials on the diaphragmatic movement over time as well as their mechanical qualities after 4 months. Ultrapro®, Surgisis®, and Proceed® were implanted onto a diaphragmatic defect...

journal_title：Journal of biomaterials applications

authors： Böhm G,Binnebösel M,Krähling E,Schumpelick V,Steinau G,Stanzel S,Anurov M,Titkova S,Ottinger A,Speer M

更新日期：2011-05-01 00:00:00

abstract：:Gold nanomaterials possess unique physical and chemical properties, which attracted much attention in recent years. As a new type of gold nanomaterials, gold nanostars (GNSTs) have been prepared and characterized in this study. GNSTs under near-infrared (NIR) light irradiation can exert not only cancer photothermal th...

journal_title：Journal of biomaterials applications

authors： Wang L,Meng D,Hao Y,Zhao Y,Li D,Zhang B,Zhang Y,Zhang Z

更新日期：2015-11-01 00:00:00

abstract：:Fabrication of osteoconductive scaffold with osteoinductive capability and appropriate resorption rate is of great significance for treating bone defects. To achieve this aim, strontium-substituted calcium sulfate hemihydrate (Sr-CSH) and hydroxyapatite (HA) were mixed to develop a novel composite. Sr-CSH containing 5...

journal_title：Journal of biomaterials applications

authors： Chang H,Xiang H,Yao Z,Yang S,Tu M,Zhang X,Yu B

更新日期：2020-07-01 00:00:00

abstract：:Novel in situ polymerizable liquid three-arm biodegradable oligomeric polyesters based upon glycolic acid (GA), L-lactic acid (LLA), and their copolymers are synthesized and characterized. Injectable and in situ curable polymer neat resins and their composites formulated with bioabsorbable beta-tricalcium phosphate ar...

journal_title：Journal of biomaterials applications

authors： Xie D,Park JG,Zhao J,Turner CH

更新日期：2007-07-01 00:00:00

abstract：:The adhesion of platelets, red blood cells, and lymphocytes onto various polymer substrates, hydrophobic to hydrophilic in nature, has been studied. Cell adhesion is found to be higher on hydrophilic substrates. The stability of these adhered cells has also been studied under a flow rate of 20 ml/min. Further the effe...

journal_title：Journal of biomaterials applications

authors： Sharma CP,Hari PR

更新日期：1991-07-01 00:00:00

abstract：:The objective of the present study was to incorporate strontium into calcium phosphate cement combined with a lower single-dose local administration of bone morphogenetic protein-2 to enhance its in vivo biodegradation and bone tissue growth. After the creation of a rodent critical-sized femoral metaphyseal bone defec...

journal_title：Journal of biomaterials applications

authors： Tao Z,Zhou W,Jiang Y,Wu X,Xu Z,Yang M,Xie J

更新日期：2018-07-01 00:00:00

abstract：:Hemocompatibility is the goal for any biomaterial contained in extracorporeal life supporting medical devices. The hallmarks for hemocompatibility include nonthrombogenicity, platelet preservation, and maintained platelet function. Both in vitro and in vivo assays testing for compatibility of the blood/biomaterial int...

journal_title：Journal of biomaterials applications

authors： Major TC,Handa H,Annich GM,Bartlett RH

更新日期：2014-10-01 00:00:00

abstract：:Medical sheets are useful in surgically repair vascular disease. To avoid long-term side effects, they are to be replaced with regenerated tissue after implantation. Silk fibroin is a fibrous protein secreted by silkworm. The advantage of silk fibroin is its biocompatibility and has been used as regenerative artificia...

journal_title：Journal of biomaterials applications

authors： Shimada K,Honda T,Kato K,Hori R,Ujike N,Uemura A,Murakami T,Kitpipatkun P,Nakazawa Y,Tanaka R

更新日期：2020-06-02 00:00:00

abstract：:The surface quality of coronary stents has a significant influence on its biocompatibility. Therefore, surface polishing is of paramount importance in the production and application of stents. In the present study, electropolishing is performed on 316LVM steel slotted tube coronary stents. Additionally, acid pickling,...

journal_title：Journal of biomaterials applications

authors： Raval A,Choubey A,Engineer C,Kothwala D

更新日期：2005-01-01 00:00:00

abstract：:The aim of this study was to examine the release of silica (Si), calcium (Ca), phosphorous (P), and fluoride (F) from conventional glass ionomer cement (GI) and resin-modified glass ionomer cement (LCGI), containing different quantities of bioactive glass (BAG). Further aim was to evaluate in vitro biomineralization o...

journal_title：Journal of biomaterials applications

authors： Yli-Urpo H,Vallittu PK,Närhi TO,Forsback AP,Väkiparta M

更新日期：2004-07-01 00:00:00

abstract：:The aim of this work was to study the cytotoxicity of different fractions of gold nanoparticles prepared by ultrasonic spray pyrolysis from gold scrap. The target cells were rat thymocytes, as a type of nonproliferating cells, and L929 mouse fibroblasts, as a type of continuous proliferating cells. Fractions 1 and 2, ...

journal_title：Journal of biomaterials applications

authors： Rudolf R,Friedrich B,Stopić S,Anžel I,Tomić S,Čolić M

更新日期：2012-01-01 00:00:00

abstract：:Sodium alginate is an effective biomaterial for tissue engineering applications. Non-purified alginate is contaminated with protein, lipopolysaccharide, DNA, and RNA, which could elicit adverse immunological reactions. We developed a purification protocol to generate biocompatible alginate based on (a) activated charc...

journal_title：Journal of biomaterials applications

authors： Sondermeijer HP,Witkowski P,Woodland D,Seki T,Aangenendt FJ,van der Laarse A,Itescu S,Hardy MA

更新日期：2016-10-01 00:00:00

abstract：:The production of large quantities of functional vascularized bone tissue ex vivo still represent an unmet clinical challenge. Microcarriers offer a potential solution to scalable manufacture of bone tissue due to their high surface area-to-volume ratio and the capacity to be assembled using a modular approach. Microc...

journal_title：Journal of biomaterials applications

authors： Peticone C,De Silva Thompson D,Owens GJ,Kim HW,Micheletti M,Knowles JC,Wall I

更新日期：2017-09-01 00:00:00