Abstract:
:Ultrasound wave propagation in nanofluids and its rheological behavior has been studied as a function of solid volume fraction, temperature and magnetic field for magnetic nanofluids synthesized in kerosene and transformer oil. Ultrasonic velocity decreases while viscosity increases with increasing volume fraction. The attenuation of ultrasonic wave is explained using dipolar coupling co-efficient which favors oligomer structures with increasing number density of particles. The structure formation increases further with increase in magnetic field which is prominent in transformer oil compared to kerosene. This difference can be due to the structural difference between these two carriers.
journal_name
Ultrasonicsjournal_title
Ultrasonicsauthors
Patel JK,Parekh Kdoi
10.1016/j.ultras.2014.08.017subject
Has Abstractpub_date
2015-01-01 00:00:00pages
26-32eissn
0041-624Xissn
1874-9968pii
S0041-624X(14)00239-Xjournal_volume
55pub_type
杂志文章相关文献
ULTRASONICS文献大全abstract::Although ultrasonic energy is widely used cleaning and degreasing of parts and assemblies in automotive and other industries, the use of ultrasonic energy in an industrial scale for textile washing is very new. This is due to the complexity of controlling the combination of chemical and mechanical effects, whereas wit...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.02.005
更新日期:2004-04-01 00:00:00
abstract::This paper proposes a new pair of sequences whose cross-correlation values are zero except for the peak value and presents a new modulation method for an ultrasonic Doppler flowmeter with high sensitivity utilizing these sequences. In this method, transmitted and received waves are modulated and demodulated, respectiv...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/0041-624x(79)90023-4
更新日期:1979-11-01 00:00:00
abstract::Lactic acid, psychrophilic, and mesophilic bacteria, Escherichia coli, Salmonella spp. and Staphylococcus aureus were enumerated on chicken breasts after treatment with different high intensity ultrasound (frequency 40 kHz, intensity 9.6 W/cm-2) application times (0, 30, and 50 min) and packaging atmospheres (aerobic ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.01.001
更新日期:2020-03-01 00:00:00
abstract::Discovery and evaluation concerns of barely visible impact damage in composite materials is a well-known issue in industries using these materials. This work proposes a frequency sweep method where damage assessment is conducted with respect to the time domain. Firstly, a combined linear and nonlinear ultrasound imagi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2018.10.011
更新日期:2019-03-01 00:00:00
abstract::Accurate computation of dispersion characteristics of guided waves in rails is important during the development of inspection and monitoring systems. Wavenumber versus frequency curves computed by the semi-analytical finite element method exhibit mode repulsion and mode crossing which can be difficult to distinguish. ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.11.014
更新日期:2018-03-01 00:00:00
abstract::Increased stiffness of the arteries has recently gained acceptance as a potential risk for cardiovascular and many other diseases. Pulse wave velocity (PWV) is widely used for estimating the stiffness of an artery. However, PWV is an indicator of average artery stiffness between two measuring points. In addition to me...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.06.054
更新日期:2006-12-22 00:00:00
abstract::Images captured during routine clinical transcranial sonography (TCS) examination are of a low resolution, so can be confusing for diagnostic evaluations. Manual segmentation of brain structures (areas of the midbrain and substantia nigra (SN)) that are of special interest cause inter-observer and intra-observer varia...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2012.04.005
更新日期:2013-01-01 00:00:00
abstract::In order to investigate non-destructively the bonding between rough plates, the problem of Lamb waves propagating on a rough plate is addressed in this paper. Numerical analysis is performed on periodical gratings made of identical triangular grooves. If the surface profile is made up of grooves with one periodicity, ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.052
更新日期:2006-12-22 00:00:00
abstract::The results of experimental and theoretical studies of nonlinear acoustic phenomena (amplitude-dependent losses, resonant frequency shifts, damping of weak ultrasonic pulses and their carrier frequency phase delay under action of a powerful low-frequency pumping wave as well as amplitude-phase self-action of the finit...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2013.07.008
更新日期:2014-02-01 00:00:00
abstract::This paper provides a derivation of the Christoffel eigenvalue equation for acoustic wave propagation in an acoustically damped piezoelectric medium. The damping tensor is shown to couple into both the stress and displacement constitutive equations. Application of the quasi-static approximation leads to an additional ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.09.005
更新日期:2006-12-01 00:00:00
abstract::In most applications of MEMS the mechanical properties of the used materials are key parameters for the perfect working of the microsystems. Measuring bulk acoustic waves excited in MEMS structures with ultra-short laser pulses is a powerful method for the accurate and non-destructive evaluation as well as for the cha...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.01.049
更新日期:2004-04-01 00:00:00
abstract::This paper presents recent improvement on sound velocity measurements under extreme conditions, illustrated by the hypersonic sound velocity measurements of water up to 723 K and 9 GPa using Brillouin scattering technique. Because water at high pressure and high temperature is chemically very aggressive, these experim...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2006.05.150
更新日期:2006-12-22 00:00:00
abstract::Investigation was carried out to study the effects of maximum aggregate size (MAS) (12.5mm, 19.0mm, 25.0mm, 37.5mm, and 50.0mm) on ultrasonic pulse velocity (UPV) of concrete. For investigation, first class bricks were collected and broken to make coarse aggregate. The aggregates were tested for specific gravity, abso...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2016.04.006
更新日期:2016-07-01 00:00:00
abstract::To eliminate the limitations of the conventional sound field separation methods which are only applicable to regular surfaces, a sound field separation method based on combined integral equations is proposed to separate sound fields directly in the spatial domain. In virtue of the Helmholtz integral equations for the ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.06.007
更新日期:2014-12-01 00:00:00
abstract::The mechanical pre-stress applied in piezotransducers used to generate high power ultrasound is needed to avoid ceramics fracture on traction cycle. Pre-stress levels inferior to 50 MPa can yield resonance shifting due to effectiveness of acoustic coupling between transducer pieces. Symmetrical transducers with differ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(03)00096-9
更新日期:2003-05-01 00:00:00
abstract::Guided waves propagating in cylindrical tubes are frequently applied for the characterization of material or geometrical properties of tubes. In a tube, guided waves can propagate in the axial direction and called axial guided waves, or in the circumferential direction called circumferential guided waves. Dispersion s...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2010.11.013
更新日期:2011-05-01 00:00:00
abstract::The motivation for this research stems from a need for providing a non-destructive testing method capable of detecting and locating any defects and microstructural variations within armour ceramic components before issuing them to the soldiers who rely on them for their survival. The development of an automated ultras...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.05.027
更新日期:2015-09-01 00:00:00
abstract::In the food industry, ultrasonic cutting is used to improve separation by a reduction of the cutting force. This reduction can be attributed to the modification of tool-workpiece interactions at the cutting edge and along the tool flanks because of the superposition of the cutting movement with ultrasonic vibration of...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.03.001
更新日期:2009-06-01 00:00:00
abstract::The propagation of thickness shear waves in a periodically corrugated quartz crystal plate is investigated in the present paper using a power series expansion technique. In the proposed simulation model, an equivalent continuity of shear stress moment is introduced as an approximation to handle sectional interfaces wi...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2017.02.004
更新日期:2017-05-01 00:00:00
abstract::Local Defect Resonance (LDR) is exploited for non-destructive testing (NDT) by using ultrasonic vibrations to get a localized resonant activation of defected zones. The LDR technique relies on the local stiffness difference between the defect and the sound material. Analyzing the structure's displacement field at this...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106130
更新日期:2020-07-01 00:00:00
abstract::The increasing number of concrete structures with symptoms of premature deterioration due to environmental action demands procedures to estimate the durability of this type of component. Concrete durability is related to porosity, which determines the intensity of interactions of the material with aggressive agents. T...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/s0041-624x(99)00095-5
更新日期:2000-03-01 00:00:00
abstract::The numerical studies conducted in this paper are based on our previous research (Chen et al., 2017); through use of the spectral element method, parametric sensitivity studies of Nonlinear Coda Wave Interferometry (NCWI) are established here and divided into two parts. In the first part, CWI observables are found to ...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.105968
更新日期:2019-11-01 00:00:00
abstract::The method of wave function expansion is adopted to study the three dimensional scattering of a time-harmonic plane progressive sound field obliquely incident upon a multi-layered hollow cylinder with interlaminar bonding imperfection. For the generality of solution, each layer is assumed to be cylindrically orthotrop...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2009.05.007
更新日期:2009-12-01 00:00:00
abstract::This paper presents a method which combines electromagnetic simulation and ultrasonic simulation to build EMAT array models. For a specific sensor configuration, Lorentz forces are calculated using the finite element method (FEM), which then can feed through to ultrasonic simulations. The propagation of ultrasound wav...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2015.10.020
更新日期:2016-03-01 00:00:00
abstract::An ultrasonic backscattering model is developed for textured polycrystalline materials with orthotropic or trigonal grains of ellipsoidal shape. The model allows us to simulate realistic microstructures and orthotropic macroscopic material textures resulting from thermomechanical processing for a broad variety of mate...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2014.02.020
更新日期:2014-09-01 00:00:00
abstract::Experimentally observed dissipated nonlinearity in Lamb wave propagation in composites due to stress-relaxation is reported herein. It was found that the stress relaxation in composite is inherently coupled with the second order nonlinear parameter derived from the Lamb wave modes. Due to the combined effect of intern...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2019.01.002
更新日期:2019-07-01 00:00:00
abstract::In this paper, the development of modified beamforming methods, Filtered Delay Weight Multiply and Sum (F-DwMAS) and Filtered Delay Euclidian-Weighted Multiply and Sum (F-DewMAS), are reported. These methods were investigated on a minimum-redundancy synthetic aperture technique, called as 2 element Receive Synthetic A...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106293
更新日期:2021-02-01 00:00:00
abstract::The purpose of this study was to investigate practical, safe, easy-to-use, non-cytotoxic, and reliable parameters to apply to an ultrasound (US) naked gene therapy system. The ultrasound pressure at the point of cell exposure was measured using a calibrated hydrophone and the intensity calculated. An acoustic power me...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2004.06.007
更新日期:2004-12-01 00:00:00
abstract::This study considers the acoustic streaming in water produced by a lithotripsy pulse. Particle image velocimetry (PIV) method was employed to visualize the acoustic streaming produced by an electromagnetic shock wave generator using video images of the light scattering particles suspended in water. Visualized streamin...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2005.09.004
更新日期:2006-02-01 00:00:00
abstract::High-frequency calibration of hydrophones is becoming increasingly important, both for clinical and scientific applications of ultrasound, and user safety. At present, the calibrations available routinely to the user community extend to 60 MHz. However, hydrophones that can measure beyond this are available, and ultra...
journal_title:Ultrasonics
pub_type: 杂志文章
doi:10.1016/j.ultras.2020.106218
更新日期:2020-12-01 00:00:00