Abstract:
OBJECTIVE:An underlying abnormality in collagen turnover is implied in the occurrence of complications and recurrences after mesh augmented pelvic floor repair surgeries. Ascorbic acid is a potent stimulant of collagen synthesis. The aim of this study is to produce ascorbic acid releasing poly-lactic acid (PLA) scaffolds and evaluate them for their effects on extracellular matrix production and the strength of the materials. MATERIALS AND METHODS:Scaffolds which contained either l-ascorbic acid (AA) and Ascorbate-2-Phosphate (A2P) were produced with emulsion electrospinning. The release of both drugs was measured by UV spectrophotometry. Human dermal fibroblasts were seeded on scaffolds and cultured for 2weeks. Cell attachment, viability and total collagen production were evaluated as well as mechanical properties. RESULTS:No significant differences were observed between AA, A2P, Vehicle and PLA scaffolds in terms of fibre diameter and pore size. The encapsulation efficiency and successful release of both AA and A2P were demonstrated. Both AA and A2P containing scaffolds were significantly more hydrophilic and stronger in both dry and wet states compared to PLA scaffolds. Fibroblasts produced more collagen on scaffolds containing either AA or A2P compared to cells grown on control scaffolds. CONCLUSION:This study is the first to directly compare the two ascorbic acid derivatives in a tissue engineered scaffold and shows that both AA and A2P releasing electrospun PLA scaffolds increased collagen production of fibroblasts to similar extents but AA scaffolds seemed to be more hydrophilic and stronger compared to A2P scaffolds. STATEMENT OF SIGNIFICANCE:Mesh augmented surgical repair of the pelvic floor currently relies on non-degradable materials which results in severe complications in some patients. There is an unmet and urgent need for better pelvic floor repair materials. Our current understanding suggests that the ideal material should be able to better integrate into sites of implantation both biologically and mechanically. The impact of vitamin C on extracellular matrix production is well established but we in this study have undertaken a critical comparison of two derivatives of vitamin C as they are released from a biodegradable scaffold. This strategy proved to be equally useful with both derivatives in terms of new tissue production yet we observed significant differences in mechanical properties of these biomaterials.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Mangır N,Bullock AJ,Roman S,Osman N,Chapple C,MacNeil Sdoi
10.1016/j.actbio.2015.10.019subject
Has Abstractpub_date
2016-01-01 00:00:00pages
188-197eissn
1742-7061issn
1878-7568pii
S1742-7061(15)30149-5journal_volume
29pub_type
杂志文章abstract:UNLABELLED:Small interfering RNAs (siRNAs) are extensively studied due to their promising potential as therapeutic agents for a wide variety of diseases, including cancer. However, efficient delivery of siRNAs to target cells and tissues is problematic due to a lack of suitable delivery vehicles. In this work, we devel...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.07.026
更新日期:2015-10-01 00:00:00
abstract:UNLABELLED:A new a biocompatible Ti42Zr40Ta3Si15 (atomic %) porous bulk glassy alloy was produced by combination of rapid solidification and powder metallurgy techniques. Amorphous alloy ribbons were fabricated by melt spinning, i.e. extremely fast quenching the molten alloy with 10(6)K/s from T=1973K down to room temp...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.03.020
更新日期:2016-05-01 00:00:00
abstract::The effects of the microstructures and phases of Zr-rich Mo alloys on their magnetic susceptibilities and mechanical properties were investigated in order to develop a Zr alloy with low magnetic susceptibility for use in magnetic resonance imaging (MRI). The magnetic susceptibility was measured with a magnetic suscept...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.07.005
更新日期:2011-12-01 00:00:00
abstract::In this work, we have evaluated the haemocompatibility of different surface modifications, intended for biomaterials and bioanalytical applications. Polystyrene slides were coated with thin hydrogel films by self-initiated photografting and photopolymerization (SIPGP) of four different monomers. The hydrogel surface m...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.12.046
更新日期:2010-07-01 00:00:00
abstract::The fibrils in the bone matrix are glued together by extracellular matrix proteins to form laminated structures (osteons) to provide elasticity and a supportive substrate for osteogenesis. The objective of this work was to investigate material properties and osteogenic differentiation of bone marrow stromal (BMS) cell...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.12.003
更新日期:2010-06-01 00:00:00
abstract::Introducing neural stem/progenitor cells (NS/PCs) for repairing facial nerve injuries could be an alternative strategy for nerve gap reconstruction. However, the lack of success associated with current methods of applying NS/PCs to neurological disease is due to poor engraftment following transplantation into the host...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2016.11.064
更新日期:2017-03-01 00:00:00
abstract::Hyperthermia and local drug delivery have been proposed as potential therapeutic approaches for bone defects resulting from malignant bone tumors. The development of bioactive materials with magnetic and drug delivery properties may potentially meet this target. The aim of this study was to develop a multifunctional m...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.06.028
更新日期:2011-10-01 00:00:00
abstract::To reduce the biocorrosion rate by surface modification, Mg-Ca alloy (1.4wt.% Ca content) was soaked in three alkaline solutions (Na(2)HPO(4), Na(2)CO(3) and NaHCO(3)) for 24h, respectively, and subsequently heat treated at 773K for 12h. Scanning electron microscopy and energy-dispersive spectroscopy results revealed ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.01.048
更新日期:2009-09-01 00:00:00
abstract::End-functional 2-methacryloyloxyethyl phosphorylcholine (MPC) co-polymers containing two different monomer units, 2-hydroxyethyl methacrylate (HEMA) and n-butyl methacrylate (BMA), with varying hydrophilicities were synthesized to investigate the effect of the conjugated hydrophilic polymer on the heat-induced conform...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.11.027
更新日期:2011-04-01 00:00:00
abstract::The objective of this study was to develop and characterize a novel intravaginal membrane platform for pH-triggered release of nanoparticles (NPs), which is essential for efficient intravaginal delivery of certain effective but acid-labile therapeutic agents for sexually transmitted infections, such as small interferi...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.10.003
更新日期:2018-12-01 00:00:00
abstract::Sponge-like matrices with a specific three-dimensional structural design resembling the actual extracellular matrix of a particular tissue show significant potential for the regeneration and repair of a broad range of damaged anisotropic tissues. The manipulation of the structure of collagen scaffolds using a freeze-d...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.09.033
更新日期:2012-02-01 00:00:00
abstract::Dentin contains 1-2μm diameter tubules extending from the pulp cavity to near the junction with enamel. Peritubular dentin (PTD) borders the tubule lumens and is surrounded by intertubular dentin (ITD). Differences in PTD and ITD composition and microstructure remain poorly understood. Here, a (∼200nm)(2), 10.1keV syn...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.05.027
更新日期:2014-09-01 00:00:00
abstract::Hydrogels have been recognized as crucial biomaterials in the field of tissue engineering, regenerative medicine, and drug delivery applications due to their specific characteristics. These biomaterials benefit from retaining a large amount of water, effective mass transfer, similarity to natural tissues and the abili...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2017.07.028
更新日期:2017-10-15 00:00:00
abstract::Immersion of electrospun polycaprolactone (PCL) nanofiber mats in calcium phosphate solutions similar to simulated body fluid resulted in deposition of biomimetic calcium phosphate layer on the nanofibers and thus a highly bioactive novel scaffold has been developed for bone tissue engineering. Coatings with adequate ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.04.037
更新日期:2009-10-01 00:00:00
abstract::Many steps are required to generate bone through endochondral ossification with adipose mesenchymal stromal cells (ASC), from cell isolation to in vitro monolayer expansion, seeding into scaffolds, cartilaginous differentiation and in vivo remodeling. Moreover, monolayer expansion and passaging of ASC strongly decreas...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.07.004
更新日期:2018-09-01 00:00:00
abstract::Since most antibacterial coatings reported to fight biomaterial-associated infections (BAI) fail in completely preventing bacterial colonization, it is crucial to know the impact of that small fraction of adhered bacteria in BAI recrudescence. This study aims to understand the fate of Staphylococcus aureus able to adh...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.07.052
更新日期:2018-09-15 00:00:00
abstract::Cartilaginous tissues engineered using mesenchymal stem cells (MSCs) have been shown to generate bone in vivo by executing an endochondral programme. This may hinder the use of MSCs for articular cartilage regeneration, but opens the possibility of using engineered cartilaginous tissues for large bone defect repair. H...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.11.031
更新日期:2015-02-01 00:00:00
abstract::A novel visible light-crosslinkable porcine gelatin was prepared for gelation and micropatterning. The preparation employed a photo-oxidation-induced crosslinking mechanism. First, furfuryl groups were incorporated into the gelatin. Second, the modified gelatin was mixed in water with Rose Bengal, which is a visible l...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.05.018
更新日期:2010-10-01 00:00:00
abstract::Hydrogels are appealing biomaterials for applications in regenerative medicine due to their tunable physical and bioactive properties. Meanwhile, therapeutic metal ions, such as magnesium ion (Mg2+), not only regulate the cellular behaviors but also stimulate local bone formation and healing. However, the effective de...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.09.039
更新日期:2017-12-01 00:00:00
abstract::The use of paper-based test platforms in cell culture experiments is demonstrated. The arrays used for two-dimensional cell cultures were prepared by printing patterned structures on a paper substrate using a hydrophobic polydimethylsiloxane (PDMS) ink. The non-printed, PDMS-free areas formed the array for the cell gr...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.01.033
更新日期:2013-05-01 00:00:00
abstract::The understanding of adhesive interaction at the nanoscale between functionalized nanoparticles and biological cells is of great importance to develop effective theranostic nanocarriers for targeted cancer therapy. Here, we report a combination of experimental and computational approaches to evaluate the adhesion betw...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.02.011
更新日期:2018-04-15 00:00:00
abstract::Classically, the evaluation of cellular adhesion of cells on substrates is limited to the evaluation of cell attachment after some hours. We have claimed for several years that this evaluation is incomplete concerning the evaluation of cell adhesion and more precisely of the quality of the in vitro cell/biomaterial in...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2005.06.001
更新日期:2005-09-01 00:00:00
abstract::The deposition of fibronectin (FN) from saline buffer-based cryogenic targets by matrix-assisted pulsed laser evaporation (MAPLE) onto silicon substrates is reported. A uniform distribution of FN was revealed by Ponceau staining after control experiments on nitrocellulose paper. Well-organized particulates with height...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.06.016
更新日期:2011-10-01 00:00:00
abstract::A series of aggregation-induced emission (AIE)-based imidazolium-type ionic liquids (ILs) were designed and synthesized for bacterial killing and imaging, cell labeling, and bacterial detection in blood cells. The AIE-based ILs showed antibacterial activities against both Escherichia coli and Staphylococcus aureus. Th...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.07.039
更新日期:2019-10-01 00:00:00
abstract::Carbon nanotubes represent promising transporters for delivery of DNA and other biomolecules into living cells. Various methods of CNTs surface functionalization have been developed. These are essential to improve CNTs dispersibility and permit their interactions with biological structures that broaden their use in ad...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2016.11.013
更新日期:2017-02-01 00:00:00
abstract::Bioprosthetic heart valves (BHVs) originating from pigs are extensively used for heart valve replacement in clinics. However, recipient immune responses associated with chronic calcification lead to structural valve deterioration (SVD) of BHVs. Two well-characterized epitopes on porcine BHVs have been implicated in SV...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.03.055
更新日期:2018-05-01 00:00:00
abstract::Biomaterial-associated infection is one of the most common complications related to the implantation of any biomedical device. Several in vivo imaging platforms have emerged as powerful diagnostic tools to longitudinally monitor biomaterial-associated infections in small animal models. In this study, we directly compa...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2014.03.005
更新日期:2014-07-01 00:00:00
abstract::In this study a binary Mg-Zn magnesium alloy was researched as a degradable biomedical material. An Mg-Zn alloy fabricated with high-purity raw materials and using a clean melting process had very low levels of impurities. After solid solution treatment and hot working the grain size of the Mg-Zn alloy was finer and a...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.06.028
更新日期:2010-02-01 00:00:00
abstract::A three-dimensional (3-D) cell culture system that allows control of both substrate stiffness and integrin binding density was created and characterized. This system consisted of two self-assembling peptide (SAP) sequences that were mixed in different ratios to achieve the desired gel stiffness and adhesiveness. The s...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.04.002
更新日期:2013-08-01 00:00:00
abstract::Three-dimensional (3D) tissue-engineered in vitro models, particularly multicellular spheroids and organoids, have become important tools to explore disease progression and guide the development of novel therapeutic strategies. These avascular constructs are particularly powerful in oncological research due to their a...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2020.09.042
更新日期:2020-11-01 00:00:00