Abstract:
:Osteoarthritis (OA), is a common musculoskeletal disorder that will progressively increase in older populations and is expected to be the most dominant cause of disability in the world population by 2030. The progression of OA is controlled by a multi-factorial pathway that has not been completely elucidated and understood yet. However, over the years, research efforts have provided a significant understanding of some of the processes contributing to the progression of OA. Both cartilage and bone degradation processes induce articular cells to produce inflammatory mediators that produce proinflammatory cytokines that block the synthesis of collagen type II and aggrecan, the major components of cartilage. Systemic administration and intraarticular injection of anti-inflammatory agents are the first-line treatments of OA. However, small anti-inflammatory molecules are rapidly cleared from the joint cavity which limits their therapeutic efficacy. To palliate this strong technological drawback, different types of polymeric materials such as microparticles, nanoparticles, and hydrogels, have been examined as drug carriers for the delivery of therapeutic agents to articular joints. The main purpose of this review is to provide a summary of recent developments in natural and synthetic polymeric drug delivery systems for the delivery of anti-inflammatory agents to arthritic joints. Furthermore, this review provides an overview of the design rules that have been proposed so far for the development of drug carriers used in OA therapy. Overall it is difficult to state clearly which polymeric platform is the most efficient one because many advantages and disadvantages could be pointed to both natural and synthetic formulations. That requires further research in the near future.
journal_name
Acta Biomaterjournal_title
Acta biomaterialiaauthors
Rahimi M,Charmi G,Matyjaszewski K,Banquy X,Pietrasik Jdoi
10.1016/j.actbio.2021.01.003subject
Has Abstractpub_date
2021-01-12 00:00:00eissn
1742-7061issn
1878-7568pii
S1742-7061(21)00004-0pub_type
杂志文章abstract::Bone morphogenetic protein-2 (BMP-2) involved therapy is of great potential for bone regeneration. However, its clinical application is restricted due to the undesirable bioactivity and relevant complications in vivo. Immobilization of recombinant BMP-2 (rhBMP-2) is an efficient strategy to mimic natural microenvironm...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.09.011
更新日期:2018-10-15 00:00:00
abstract::Human mesenchymal stem cells (hMSCs) have tremendous potential as a cell source for regenerative medicine due to their capacity for differentiation into a wide range of connective tissue cell types. Although significant progress has been made in the identification of defined growth factor conditions to induce lineage ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.07.023
更新日期:2010-01-01 00:00:00
abstract::Blood-contacting medical devices are an integral part of modern medicine. Such devices may be used for only a few hours or may be implanted for life. Despite advances in biomaterial science, clotting on medical devices remains a common problem. Systemic administration of antiplatelet drugs or anticoagulants is often n...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2019.06.021
更新日期:2019-08-01 00:00:00
abstract::Bone morphogenetic protein-2 (BMP-2) is known to enhance fracture healing when delivered via a bovine collagen sponge. However, collagen rapidly releases BMP-2 with a high burst phase that is followed by a low sustained phase. As a result, supra-physiological doses of BMP-2 are often required to successfully treat bon...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.07.008
更新日期:2013-11-01 00:00:00
abstract::Tubular collagen scaffolds have been used for the repair of damaged hollow organs in regenerative medicine, but they generally lack the ability to reversibly expand in radial direction, a physiological characteristic seen in many native tubular organs. In this study, tubular collagen scaffolds were prepared that displ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.02.005
更新日期:2017-04-01 00:00:00
abstract::Novel Mg-Zr-Sr alloys have recently been developed for use as biodegradable implant materials. The Mg-Zr-Sr alloys were prepared by diluting Mg-Zr and Mg-Sr master alloys with pure Mg. The impact of Zr and Sr on the mechanical and biological properties has been thoroughly examined. The microstructures and mechanical p...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.04.028
更新日期:2012-08-01 00:00:00
abstract::A major barrier to the development of a clinically useful small diameter tissue engineered vascular graft (TEVG) is the scaffold component. Scaffold requirements include matching the mechanical and structural properties with those of native vessels and optimizing the microenvironment to foster cell integration, adhesi...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.06.026
更新日期:2010-01-01 00:00:00
abstract::The use of paper-based test platforms in cell culture experiments is demonstrated. The arrays used for two-dimensional cell cultures were prepared by printing patterned structures on a paper substrate using a hydrophobic polydimethylsiloxane (PDMS) ink. The non-printed, PDMS-free areas formed the array for the cell gr...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.01.033
更新日期:2013-05-01 00:00:00
abstract::High porosity and pore interconnectivity are important features of a successful tissue engineering scaffold. The objective of this work was to optimize the pore interconnectivity and to increase the porosity of an elastomeric degradable/polar/hydrophobic/ionic (D-PHI) polyurethane porous scaffold while maintaining its...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.06.018
更新日期:2010-11-01 00:00:00
abstract::Human enamel has been found to be a coating with excellent mechanical performance, and has undergone extensive investigation and discussion. However, most of the reported studies consider the enamel as a homogeneous anisotropic biocomposite. The current study illustrated the graded properties of the biocomposite from ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.12.029
更新日期:2013-05-01 00:00:00
abstract::The surface topography and local elastic moduli of endothelial cells exposed to shear stress were measured using atomic force microscopy. Bovine aortic endothelial cells were exposed to shear stress of 2Pa for 6, 12 or 24h. In addition, a confocal laser-scanning microscope used in conjunction with the atomic force mic...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2006.07.009
更新日期:2007-05-01 00:00:00
abstract::Bioabsorbable polymers are increasingly being used in tissue engineering strategies. Despite the knowledge that some sterilization techniques may affect the physical properties of these polymers, this aspect is often overlooked. We speculate that the type of sterilization method used may influence cellular responses b...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.11.022
更新日期:2010-06-01 00:00:00
abstract::Clinically, hypertrophic scarring (HS) is a major concern for patients and has been a challenge for surgeons, as there is a lack of treatments that can intervene early in the formation of HS. This study reports on a Chinese drug, 20(R)-ginsenoside Rg3 (GS-Rg3), which can inhibit in vivo the early formation of HS and l...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.07.040
更新日期:2013-12-01 00:00:00
abstract::An important requirement for a bone tissue engineering scaffold is a stiffness gradient that mimics that of native bone. Such scaffolds can be achieved by controlling their structure and porosity and are termed functionally graded scaffolds (FGS). Currently, the main challenges in FGS fabrication include the iterative...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.09.024
更新日期:2011-02-01 00:00:00
abstract::Poly(ether ether ketone) (PEEK) and its composites are recognized as alternative bearing materials for use in arthroplasty because of their mechanical properties. The objective of this project was to evaluate the biological response of two different kinds of carbon fiber-reinforced (CFR) PEEK compared with ultra-high ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.06.002
更新日期:2010-11-01 00:00:00
abstract::Atomic force microscopy (AFM) was used to study the morphological changes of two gram-negative pathogens, Pseudomonas aeruginosa and Escherichia coli, after exposure to nitric oxide (NO). The time-dependent effects of NO released from a xerogel coating and the concentration-dependent effects rendered by a small molecu...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2009.01.025
更新日期:2009-06-01 00:00:00
abstract::Slow protein release from amyloidal materials is a molecular platform used by nature to control protein hormone secretion in the endocrine system. The molecular mechanics of the sustained protein release from amyloids remains essentially unexplored. Inclusion bodies (IBs) are natural amyloids that occur as discrete pr...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.11.033
更新日期:2013-04-01 00:00:00
abstract::Three protease-resistant bioorganic 304 stainless steel surfaces were created through the reaction of synthetic peptides consisting of the D-enantiomeric isomer (D-K122-4), the retro-inverso D-enantiomeric isomer (RI-K122-4), and a combination of the two peptides (D+RI) of the Pseudomonas aeruginosa PilA receptor bind...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.11.026
更新日期:2013-04-01 00:00:00
abstract::Photochemical internalisation (PCI) is a method for enhancing delivery of drugs to their intracellular target sites of action. In this study we investigated the efficacy of PCI using a porphyrin photosensitiser and a cytotoxic agent on spheroid and non-spheroid compressed collagen 3D constructs of ovarian cancer versu...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.09.041
更新日期:2018-11-01 00:00:00
abstract::The calcareous spicules from sponges, e.g. from Sycon raphanus, are composed of almost pure calcium carbonate. In order to elucidate the formation of those structural skeletal elements, the function of the enzyme carbonic anhydrase (CA), isolated from this species, during the in vitro calcium carbonate-based spicule f...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2013.08.025
更新日期:2014-01-01 00:00:00
abstract::The preparation of scaffolds to facilitate the replacement of damaged tissues and organs by means of tissue engineering has been much investigated. The key properties of the biomaterials used to prepare such scaffolds include biodegradability, biocompatibility and a well-defined three-dimensional 3-Dpore network struc...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2012.12.004
更新日期:2013-04-01 00:00:00
abstract::The aim of the present study was to evaluate the biocompatibility and bone mineralization potential of 45S5 Bioglass-derived glass-ceramic scaffolds using a chick embryo shell-less (ex ovo) culture system. Chick embryos were divided into two groups: control (C) and experimental (E). Scaffolds were placed on the chorio...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2008.07.016
更新日期:2009-01-01 00:00:00
abstract::The boundary layers coating articular cartilage in synovial joints constitute unique biomaterials, providing lubricity at levels unmatched by any human-made materials. The underlying molecular mechanism of this lubricity, essential to joint function, is not well understood. Here we study the interactions between surfa...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2017.06.043
更新日期:2017-09-01 00:00:00
abstract::Artificial scaffolds made up of various synthetic biodegradable polymers have been reported to have many advantages including cheap manufacturing, easy scale up, high mechanical strength, convenient manipulation, and molding into an unlimited variety of shapes. However, the synthetic biodegradable polymers still have ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2018.04.022
更新日期:2018-06-01 00:00:00
abstract::Resorbable and elastomeric poly(trimethylene carbonate) (PTMC) networks were efficiently prepared by photoinitiated crosslinking of linear high-molecular-weight PTMC. To crosslink PTMC films, low-molecular-weight PTMC macromers with methacrylate end groups were synthesized and used as crosslinking aids. By exposing PT...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2011.01.010
更新日期:2011-05-01 00:00:00
abstract::Evidence that macrophages can play a role in accelerating corrosion in CoCrMo alloy in total hip replacement (THR) interfaces leads to questions regarding the underlying cellular mechanisms and immunological responses. Hence, we evaluated the role of macrophages in corrosion processes using the cell culture supernatan...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2019.10.039
更新日期:2020-01-01 00:00:00
abstract::Thin film nitinol has unique mechanical properties (e.g., superelasticity), excellent biocompatibility, and ultra-smooth surface, as well as shape memory behavior. All these features along with its low-profile physical dimension (i.e., a few micrometers thick) make this material an ideal candidate in developing low-pr...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2015.03.025
更新日期:2015-07-01 00:00:00
abstract::Eggshell membrane (ESM) is a unique biomaterial, which is generally considered as waste. However, it has extraordinary properties which can be utilized in various fields and its potential applications are therefore now being widely studied. The first part of this review focuses on the chemical composition and morpholo...
journal_title:Acta biomaterialia
pub_type: 杂志文章,评审
doi:10.1016/j.actbio.2014.03.020
更新日期:2014-09-01 00:00:00
abstract::Although decayed/fractured teeth can be reconstructed minimally invasively and nearly invisibly using adhesive technology, the clinical longevity of dental composite restorations is still too short. Water sorption is thought to be the principal cause of destabilization of the biomaterial-tooth bond. However, the actua...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2010.03.024
更新日期:2010-09-01 00:00:00
abstract::Macrophages represent a large component of the tumour microenvironment and are described to establish interactions with cancer cells, playing crucial roles in several stages of cancer progression. The functional plasticity of macrophages upon stimulation from the environment makes them susceptible to the influence of ...
journal_title:Acta biomaterialia
pub_type: 杂志文章
doi:10.1016/j.actbio.2015.05.022
更新日期:2015-09-01 00:00:00