Preparation and characterization of nimesulide containing nanocrystal formulations.

abstract：:Quality by design (QbD) is an essential part of the modern approach to pharmaceutical quality. This study was conducted in the framework of a QbD project involving ramipril tablets. Preliminary work included identification of the critical quality attributes (CQAs) and critical process parameters (CPPs) based on the qu...

journal_title：Pharmaceutical development and technology

authors： Aksu B,Paradkar A,de Matas M,Özer Ö,Güneri T,York P

更新日期：2013-02-01 00:00:00

abstract：:A preliminary study of the feasibility of using near-infrared spectroscopy (NIRS) for the offline simultaneous determination of metoprolol tartrate (MTP) and hydrochlorothiazide (HTZ) in powders and tablets has been carried out. An industrial tableting process was simulated using an instrumented tablet press replicato...

journal_title：Pharmaceutical development and technology

authors： Vranic BZ,Vandamme TF

更新日期：2015-01-01 00:00:00

abstract：:To develop an effective therapeutic treatment, the potential of poly (lactic-co-glycolic acid)-polyethylene glycol-retinoic acid (PLGA-PEG-RA) polymeric micelles for targeted delivery of irinotecan to hepatocellular carcinoma (HepG2) and colorectal cancer cell lines (HT-29) was evaluated. PLGA-PEG-RA was synthesized b...

journal_title：Pharmaceutical development and technology

authors： Emami J,Maghzi P,Hasanzadeh F,Sadeghi H,Mirian M,Rostami M

更新日期：2018-01-01 00:00:00

abstract：:In pediatrics, it is crucial to ameliorate the unpleasant taste of oral pharmaceutical formulations in order to facilitate patient compliance. Scientists' attempt to develop modern products for children is included among the new trends in pharmaceutical technology. Designing the preparation procedures and selecting th...

journal_title：Pharmaceutical development and technology

authors： Karaiskou SG,Kouskoura MG,Markopoulou CK

更新日期：2020-01-01 00:00:00

abstract：INTRODUCTION:Theoretical models of the freeze-drying process are potentially useful to guide the design of a freeze-drying process as well as to obtain information not readily accessible by direct experimentation, such as moisture distribution and glass transition temperature, Tg, within a vial during processing. Previ...

journal_title：Pharmaceutical development and technology

authors： Pikal MJ,Cardon S,Bhugra C,Jameel F,Rambhatla S,Mascarenhas WJ,Akay HU

更新日期：2005-01-01 00:00:00

abstract：:Understanding variability in excipient physico-chemical properties is becoming an important aspect of Quality-by-Design drug product development. However, present experimental methods have only been able to study a few physico-chemical properties for a few excipient lots due to time, cost, and sample gathering conside...

journal_title：Pharmaceutical development and technology

authors： Kushner J 4th

更新日期：2013-03-01 00:00:00

abstract：:A new approach to developing a drug-polymer mixed coat for highly water-soluble diltiazem pellets was investigated at different coating levels. Drug layering and the coating procedures were performed using a bottom spray fluidized bed coater. Drug pellets were coated with Eudragit NE40 (NE40) alone and in combination ...

journal_title：Pharmaceutical development and technology

authors： Nisar ur Rahman,Yuen KH,Khan NA,Wong JW

更新日期：2006-02-01 00:00:00

abstract：:Two types of casein hydrolysates, casein A (mean peptide length 3.3) and casein B (mean peptide length 17.4) were prepared by the enzymatic hydrolysis of casein, and their effects on in vitro dissolution rates and oral bioavailability of drugs were evaluated. The in vitro dissolution behavior of the kneaded mixture of...

journal_title：Pharmaceutical development and technology

authors： Imai T,Nishiyama T,Shameem M,Otagiri M

更新日期：1998-05-01 00:00:00

abstract：:Seven potential impurities, including by-products, starting materials and intermediates were identified in pharmaceutical substance quetiapine fumarate and characterized by spectroscopic methods (MS, IR, NMR). Based on these methods the structures of the impurities were assigned or confirmed as: impurity I: 2-(phenylt...

journal_title：Pharmaceutical development and technology

authors： Stolarczyk EU,Kaczmarek L,Eksanow K,Kubiszewski M,Glice M,Kutner A

更新日期：2009-01-01 00:00:00

abstract：:The aim of this research was to develop and assess a new dissolution apparatus for orodispersible films (ODFs). The new apparatus was based on a flow-through cell design which requires only a limited amount of dissolution medium and can automatically collect samples in short-time intervals. Compared with the dissoluti...

journal_title：Pharmaceutical development and technology

authors： Xia Y,Chen F,Zhang H,Luo C

更新日期：2015-05-01 00:00:00

abstract：:Due to their light consistency and good spreadability, aqueous foams are considered as convenient and highly accepted drug carrier systems that are of great importance in the field of topical drug delivery. The production of a stable, easy to dose, preferably environmentally harmless foam formulation is challenging. T...

journal_title：Pharmaceutical development and technology

authors： Farkas D,Kállai-Szabó N,Sárádi-Kesztyűs Á,Lengyel M,Magramane S,Kiss É,Antal I

更新日期：2020-12-27 00:00:00

abstract：:Vardenafil hydrochloride (VAR) is an erectile dysfunction treating drug. VAR has a short elimination half-life (4-5 h) and suffers low oral bioavailability (15%). This work aimed to explore the dual potential of VAR-dendrimer complexes as drug release modulators and oral bioavailability enhancers. VAR-dendrimer comple...

journal_title：Pharmaceutical development and technology

authors： Tawfik MA,Tadros MI,Mohamed MI

更新日期：2019-03-01 00:00:00

abstract：:This paper explores the utility of aqueous solubility of structurally similar drugs in predicting optimum conditions for extrusion and spheronization of pellets using response surface methodology. Pharmacologically active xanthine derivatives exhibiting widely varying aqueous solubility were used to determine optimum ...

journal_title：Pharmaceutical development and technology

authors： Hileman GA,Upadrashta SM,Neau SH

更新日期：1997-02-01 00:00:00

abstract：:The binding mechanism of tablets prepared by single-step granulation/tabletting (SSGT), a novel technique for the production of tablets, was evaluated. SSGT yielded hard tablets having a short disintegration time due to their porous, spongelike internal structure. Calculation of the interaction factor and electrical c...

journal_title：Pharmaceutical development and technology

authors： Vermeire A,Keleb EI,Kiekens F,Van Driessche I,Hoste S,Remon JP,Vervaet C

更新日期：2005-01-01 00:00:00

abstract：:Microporous polymeric matrices prepared from poly(ɛ-caprolactone) [PCL] were evaluated for controlled vaginal delivery of the antiprotozoal agent (tinidazole) in the treatment of the sexually transmitted infection, trichomoniasis. The matrices were produced by rapidly cooling co-solutions of PCL and tinidazole in acet...

journal_title：Pharmaceutical development and technology

authors： Fernando HV,Chan LL,Dang N,Santhanes D,Banneheke H,Nalliah S,Coombes AGA

更新日期：2019-03-01 00:00:00

abstract：:The main objective of this study was to design positively charged Levofloxacin Hemihydrate (Levo-h)-loaded nanoparticles with improved entrapment efficiency and antibacterial activity. PLGA alone or in combinations with Eudragit® RLPO or RS30D with or without positively charged inducing agent; 1,2-dioleoyl-3-trimethyl...

journal_title：Pharmaceutical development and technology

authors： Hasan AA,Sabry SA,Abdallah MH,El-Damasy DA

更新日期：2016-09-01 00:00:00

abstract：CONTEXT AND OBJECTIVE:The objective of the study was to develop a stable capsule formulation of ziprasidone hydrochloride which can be administered without regards to food intake. MATERIALS AND METHODS:The unstable anhydrous form of ziprasidone hydrochloride was stabilized employing hot-melt extrusion and further opti...

journal_title：Pharmaceutical development and technology

authors： Banerjee S,Shankar KR,Prasad Y R

更新日期：2016-11-01 00:00:00

abstract：:The purpose of this study was to investigate the effect of the composition of a binary powder mixture on the bonding index, the brittle fracture index, and the strain index, as defined by Hiestand. The studies involved tensile strength and dynamic indentation hardness determinations of square compacts, the solid fract...

journal_title：Pharmaceutical development and technology

authors： Majuru S,Wurster DE

更新日期：1997-11-01 00:00:00

abstract：CONTEXT:Development and evaluation of thermosensitive and bioadhesive liquid suppositories containing ketoprofen (KP). OBJECTIVE:This study was conducted to develope thermosensitive and bioadhesive liquid suppositories containing KP using poloxamer and different bioadhesive polymers and to investigate their gelation t...

journal_title：Pharmaceutical development and technology

authors： Ozgüney I,Kardhiqi A

更新日期：2014-12-01 00:00:00

abstract：:The hygroscopicity of Brequinar sodium, an organ transplant immunosuppressant, at 75% relative humidity highly depends on the crystal form or crystallinity of the drug substance. Hygroscopicity and ease of water uptake of three lots of Brequinar sodium were investigated. Those lots contained different impurities at le...

journal_title：Pharmaceutical development and technology

authors： Wu LS,Pang J,Hussain MA

更新日期：1996-04-01 00:00:00

abstract：:A prototype parenteral manufacturing facility based on isolation technology was designed, constructed, and commissioned at Warner-Lambert Co., Morris Plains, NJ, with emphasis on its application to research and development (R&D) settings. The facility contains closed isolators for holding, transferring, and manufactur...

journal_title：Pharmaceutical development and technology

authors： Krishna AK,Lodhi SA,Harris MR

更新日期：2000-01-01 00:00:00

abstract：:The present work investigated the magnitude of microsphere-induced acute myotoxicity and determined whether this myotoxicity is related to microsphere size and/or reconstitution solvent. Using a high molecular weight poly(dl-lactide-co-glycolide) copolymer, the myotoxicity of two different size microsphere formulation...

journal_title：Pharmaceutical development and technology

authors： Brazeau GA,Sciame M,al-Suwayeh SA,Fattal E

更新日期：1996-10-01 00:00:00

abstract：:The objective of this paper was to evaluate the mucoadhesive and sustained-release properties of the water-soluble gum obtained from Hakea gibbosa (hakea), for the formulation of buccal tablets. Flatfaced tablets containing hakea were formulated using chlorpheniramine maleate (CPM) as a model drug. Two types of tablet...

journal_title：Pharmaceutical development and technology

authors： Alur HH,Pather SI,Mitra AK,Johnston TP

更新日期：1999-08-01 00:00:00

abstract：:The instability of protein and antigen(s) during encapsulation in biodegradable polymers by water-in-oil-in-water (w/o/w) encapsulation is well established. The aim of present study is to screen various additives to prevent the inactivation and loss of immunogenicity of HBsAg upon its exposure to the water/CH(2)Cl(2) ...

journal_title：Pharmaceutical development and technology

authors： Tomar P,Giri N,Karwasara VS,Pandey RS,Dixit VK

更新日期：2012-07-01 00:00:00

abstract：:A redox-responsive docetaxel (DTX) prodrug consisting of a disulfide linkage between DTX and vitamin E (DTX-SS-VE) was synthesized in our laboratory and was successfully formulated into liposomes. The aim of this study was to optimize the formulation and investigate the cellular uptake of DTX prodrug-loaded liposomes ...

journal_title：Pharmaceutical development and technology

authors： Ren G,Jiang M,Guo W,Sun B,Lian H,Wang Y,He Z

更新日期：2018-01-01 00:00:00

abstract：:When a nebulizer is evaluated by the Andersen Cascade Impactor (ACI), the flow rate is generally maintained at 28.3 L/min, as recommended by the manufacturer. However, the nebulizer flow rate that a patient inhales is only around 18 L/min. Because the drive flow of a nebulizer is approximately 6-8 L/min, the nebulized...

journal_title：Pharmaceutical development and technology

authors： Zhou Y,Brasel TL,Kracko D,Cheng YS,Ahuja A,Norenberg JP,Kelly HW

更新日期：2007-01-01 00:00:00

abstract：:Taking into account possible irritation of the skin upon contact with naproxen (NPX) crystals and lower bioavailability after administration of the suspended or ionized drug, the aim of the work was to design and characterize novel and easy-to-formulate gels with the entirely dissolved drug in the acidic form. The for...

journal_title：Pharmaceutical development and technology

authors： Osmałek T,Milanowski B,Froelich A,Górska S,Białas W,Szybowicz M,Kapela M

更新日期：2017-06-01 00:00:00

abstract：:In this study, we designed a polymersome system for the controlled release of methotrexate (MTX) as an anticancer drug with the objective of improving the loading efficiency of the drug in polymersomes as well as achievement of an efficient control on the release rate of drug from nanocarriers. We synthesized mono met...

journal_title：Pharmaceutical development and technology

authors： Nosrati H,Adinehvand R,Manjili HK,Rostamizadeh K,Danafar H

更新日期：2019-01-01 00:00:00

abstract：:Colorectal cancer (CRC) is the third most common cause of cancer-related death in both men and women. Often, surgical intervention remains the choice in treating CRC. Traditional dosage forms used for treating CRC deliver drug to wanted as well as unwanted sites of drug action resulting in several adverse side effects...

journal_title：Pharmaceutical development and technology

authors： Krishnaiah YS,Khan MA

更新日期：2012-09-01 00:00:00

abstract：:The purpose of this study was a comparative evaluation of miniaturized vs. University of Minnesota's (i.e., U of Minn. = Hiestand's) procedures for determining the tensile strength, indentation hardness, and bonding index (BI), one out of three Indices of Tableting Performance (ITP). Tableting properties of six direct...

journal_title：Pharmaceutical development and technology

authors： Lamey K,Schwartz J,Muller F

更新日期：2003-08-01 00:00:00