Abstract：
:Quantification in clinical, diagnostic electromyography (EMG) currently includes motor unit action potential (MUAP) analysis and interference pattern analysis. Early efforts to examine the frequency/power spectra of the interference pattern showed modest value but the technique was not developed further. This paper re-examines spectral analysis, extending it into the time-varying domain, which has never been studied in diagnostic needle EMG. Time-frequency and time-scale analysis employing wavelet and non-wavelet techniques were applied to short trains of MUAPs. The results show that time-varying analysis produces clear visual representations of the energy content of individual MUAPs within an interference pattern. The time frequency representations allow easy, qualitative distinction between normal and neurogenic MUAPs. Furthermore, the quantified MUAP energy correlates well with the current morphological standard and the quantification process is substantially faster. Time-varying analysis links classical power spectral analysis in the realm of interference patterns with quantitative MUAP analysis. In addition to morphological classification, MUAPs might also be classified by energy content, which more closely reflects the physical and physiological consequences of neuromuscular pathology on the motor unit.
journal_name
Med Eng Physjournal_title
Medical engineering & physicsauthors
Sheean GLdoi
10.1016/j.medengphy.2011.07.017subject
Has Abstractpub_date
2012-03-01 00:00:00pages
249-55issue
2eissn
1350-4533issn
1873-4030pii
S1350-4533(11)00182-2journal_volume
34pub_type
杂志文章abstract：:The BION (Bionic Neuron) is a single channel implantable neurostimulator of unique design that can be delivered by injection. The development of the BION injectable neurostimulators exemplifies a challenging, but well posed medical design problem addressed with a successful strategy for prioritizing and resolving the ...
journal_title：Medical engineering & physics
pub_type： 杂志文章,评审
doi：10.1016/j.medengphy.2010.08.010
更新日期：2011-01-01 00:00:00
abstract：:Recent approaches to the in vitro experimental study of cardiac fluid mechanics involve the use of whole biological structures to investigate in the lab novel therapeutic approaches for the treatment of heart pathologies. To enhance reliability and repeatability, the influence of the actuation strategy of the experime...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2016.01.007
更新日期：2016-04-01 00:00:00
abstract：:Computational fluid dynamics (CFD) simulations quantifying thoracic aortic flow patterns have not included disturbances from the aortic valve (AoV). 80% of patients with aortic coarctation (CoA) have a bicuspid aortic valve (BAV) which may cause adverse flow patterns contributing to morbidity. Our objectives were to d...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2012.07.015
更新日期：2013-06-01 00:00:00
abstract：:Whereas left ventricular assist device (LVAD) is the gold-standard therapy for patients with heart failure, gastrointestinal bleeding is one of the most common complications. LVAD implantation may remarkably impact aortic hemodynamics so that experimental and computational flow analyses can be used to study the diseas...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2017.06.029
更新日期：2017-09-01 00:00:00
abstract：:The value of compliance of disposable elements such as infusion lines and syringes can significantly affect the performance characteristics of infusion devices. In a technique used to determine the compliance of infusion lines, the item under test is placed in a semi sealed water filled enclosure and the volume of flu...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2014.07.016
更新日期：2014-11-01 00:00:00
abstract：:Cutting and drilling operations in bone are involved in many orthopedic and otolaryngological surgeries. The temperature elevation of these procedures is potentially harmful to bone and soft tissue cells. The research on this topic aims therefore at minimizing temperature elevation and finding optimal process paramete...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2016.06.019
更新日期：2016-10-01 00:00:00
abstract：:The definition of spinal instability is still controversial. For this reason, it is essential to better understand the difference in biomechanical behaviour between healthy and degenerated human spinal segments in vivo. A novel computer-assisted instrument was developed with the objective to characterize the biomechan...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2009.07.002
更新日期：2009-11-01 00:00:00
abstract：:Some pulmonary diseases and injuries are believed to correlate with lung viscoelasticity changes. Hence, a better understanding of lung viscoelastic models could provide new perspectives on the progression of lung pathology and trauma. In the presented study, stress relaxation measurements were performed to quantify r...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2015.05.003
更新日期：2015-08-01 00:00:00
abstract：:The acetabular cup (AC) is an implant impacted into a bone cavity and used for hip prosthesis surgery. Initial stability of the AC is an important factor for long term surgical success. The aim of this study is to determine the variations of the impact duration during AC implant insertion. Twenty-two bone samples take...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2013.04.005
更新日期：2013-11-01 00:00:00
abstract：:Metal plates are commonly used in the operative treatment of bone fractures. Rigid metal plates stabilize the fracture site, maintain good contact between bone fragments and allow early weight bearing and patient mobility. However, treatment with rigid metal plates can cause localized bone atrophy due to stress-shield...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/1350-4533(95)00041-0
更新日期：1996-04-01 00:00:00
abstract：:In this paper we investigate the extent to which variable porosity drug-eluting coatings can provide better control over drug release than coatings where the porosity is constant throughout. In particular, we aim to establish the potential benefits of replacing a single-layer with a two-layer coating of identical tota...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2017.04.006
更新日期：2017-07-01 00:00:00
abstract：:Human-administered clinical scales are commonly used for quantifying motor performance and determining the course of therapy in post-stroke individuals. Computerized methods aim to improve consistency, resolution and duration of patients' evaluation. The objective of this study was to test the validity of computerized...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2019.06.001
更新日期：2019-09-01 00:00:00
abstract：:A dynamic biomechanical model to determine loads (joint forces) attained at the lumbosacral joint-centre during the stance phase of normal level walking was developed. The biomechanical model was based on rigid free body-segments; namely, the foot, shank, thigh, pelvis and head, arms and trunk (HAT) segments. In this ...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/1350-4533(95)90374-k
更新日期：1995-01-01 00:00:00
abstract：:A ligamentous, nonlinear, sliding contact, three-dimensional finite element (FE) model of L2-L3 complex was developed to investigate the biomechanical effect of laminectomy with and without facetectomy. The L2-L3 FE model was validated against experimental study under various physiological loadings and found to match ...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2003.11.006
更新日期：2004-04-01 00:00:00
abstract：:Two quantitative techniques have been evaluated to examine whether respiratory sinus arrhythmia can be detected in atrial fibrillation. Cyclical changes in heart rate during deep breathing indicating respiratory sinus arrhythmia were seen in 11/15 control patients, but only 1/44 patients with atrial fibrillation. Powe...
journal_title：Medical engineering & physics
pub_type： 临床试验,杂志文章
doi：10.1016/1350-4533(94)90061-2
更新日期：1994-07-01 00:00:00
abstract：:Knowledge about the human skin mechanical properties is essential in several domains, particularly for dermatology, cosmetic or to detect some cutaneous pathology. This study proposes a new method to determine the human skin mechanical properties in vivo using the indentation test. Usually, the skin mechanical paramet...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2007.06.011
更新日期：2008-06-01 00:00:00
abstract：:The impeller blood pump with its simplicity has many advantages compared with the diaphragm pump, but the nonpulsatile property has limited its applications. To make the impeller pump pulsatile, many investigations have been made in vain because of resulting haemolysis. The author has succeeded in producing a pulsatil...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/1350-4533(95)00010-0
更新日期：1996-01-01 00:00:00
abstract：:Dental implant stability influences the decision on the determination of the duration between implant insertion and loading. This work investigates the resonant frequency analysis by means of a numerical model. The investigation is done numerically through the determination of the eigenfrequencies and performing stead...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2019.02.008
更新日期：2019-04-01 00:00:00
abstract：:Taper connections of modular hip prostheses are at risk of fretting and corrosion, which can result in reduced implant survival. The purpose of this study was to identify the minimum torque required to initiate a removal of the passivation layer at the taper interface as a function of assembly force and axial load. Ti...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2014.06.011
更新日期：2014-09-01 00:00:00
abstract：:The present paper presents a homogenisation technique applied to the problem of calculating equivalent material properties of a resin impregnated wire mesh. Although this type of material can be expected to possess, in general, a four-fold axis of rotational symmetry, it was found that a transversally isotropic model ...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/s1350-4533(00)00065-5
更新日期：2000-09-01 00:00:00
abstract：:This paper investigates the possibility of characterizing the differences between normal- and high-risk postoperative cardiac patients on the basis of four parameters related to a simple linear model of cardiorespiratory performances. The model comprises three subsystems representing cardiac, vascular and respiratory ...
journal_title：Medical engineering & physics
pub_type： 临床试验,杂志文章
doi：10.1016/1350-4533(94)90073-6
更新日期：1994-11-01 00:00:00
abstract：:Biological tissues exhibit diverse mechanical behaviors because of complex material properties. As has been shown for ligaments and intervertebral discs, mathematical models often appear to well predict load responses individually by adjusting model parameters, but likely fail to describe several different load respon...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2007.03.001
更新日期：2008-03-01 00:00:00
abstract：:Investigations of compressive frequency, duty cycle, or waveform during CPR are typically rooted in animal research or computer simulations. Our goal was to generate a mechanical model incorporating alternate stiffness settings and an integrated blood flow system, enabling defined, reproducible comparisons of CPR effi...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2017.02.005
更新日期：2017-05-01 00:00:00
abstract：:Patients affected by motor disorders of the hand and having residual voluntary movements of fingers or wrist can benefit from self-rehabilitation exercises performed with so-called dynamic hand splints. These systems consist of orthoses equipped with elastic cords or springs, which either provide a sustained stretch o...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2013.10.015
更新日期：2014-02-01 00:00:00
abstract：:This paper describes the application of probabilistic design methods to the analysis of the behaviour of an uncemented total hip replacement femoral component implanted in a proximal femur. Probabilistic methods allow variations in factors which control the behaviour of the implanted femur (the input parameters) to be...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2009.01.002
更新日期：2009-05-01 00:00:00
abstract：:In this study we integrated between confocal-based cell-specific finite element (FE) modeling and Virtual Cell (VC) transport simulations in order to determine trends of relationship between externally applied compressive deformations and build-up rates of oxygen in myoblast cells, and to further test how mild culture...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2011.04.008
更新日期：2011-11-01 00:00:00
abstract：:A DNA electrochemical biosensor is an integrated receptor-transducer device. The most important step in the development and manufacture of a sensitive DNA-biosensor for the detection of DNA-drug interactions is the immobilization procedure of the nucleic acid probe on the transducer surface. Magnetic A/C Mode atomic f...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2006.05.009
更新日期：2006-12-01 00:00:00
abstract：:We have developed a computer-based system to simulate a guidewire in blood vessels for surgical planning, intra-operative assistance, and to facilitate the design of new guidewires. In this study, we compared simulation results with experimental results for validation of the simulation system. First, we inserted a com...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2014.09.012
更新日期：2014-12-01 00:00:00
abstract：:Extensive research is ongoing in the field of orthoses/exoskeleton design for efficient lower limbs assistance. However, despite wearable devices reported to improve lower limb mobility, their structural impacts on whole-body vertical dynamics have not been investigated. This study introduced a model identification ap...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2020.04.005
更新日期：2020-06-01 00:00:00
abstract：:Quantifying the risk of falling (falls risk) would be helpful in treating people with gait disorders. The gait sensitivity norm (GSN) is a stability measure that correlates well to risk of falling in passive dynamic walkers but has not been evaluated on humans or human-like walking models. We assessed the correlation ...
journal_title：Medical engineering & physics
pub_type： 杂志文章
doi：10.1016/j.medengphy.2013.03.018
更新日期：2013-10-01 00:00:00
