Abstract:
:Design of 3D scaffolds that can facilitate proper survival, proliferation, and differentiation of progenitor cells is a challenge for clinical applications involving large connective tissue defects. Cell migration within such scaffolds is a critical process governing tissue integration. Here, we examine effects of scaffold pore diameter, in concert with matrix stiffness and adhesivity, as independently tunable parameters that govern marrow-derived stem cell motility. We adopted an "inverse opal" processing technique to create synthetic scaffolds by crosslinking poly(ethylene glycol) at different densities (controlling matrix elastic moduli or stiffness) and small doses of a heterobifunctional monomer (controlling matrix adhesivity) around templating beads of different radii. As pore diameter was varied from 7 to 17 µm (i.e., from significantly smaller than the spherical cell diameter to approximately cell diameter), it displayed a profound effect on migration of these stem cells-including the degree to which motility was sensitive to changes in matrix stiffness and adhesivity. Surprisingly, the highest probability for substantive cell movement through pores was observed for an intermediate pore diameter, rather than the largest pore diameter, which exceeded cell diameter. The relationships between migration speed, displacement, and total path length were found to depend strongly on pore diameter. We attribute this dependence to convolution of pore diameter and void chamber diameter, yielding different geometric environments experienced by the cells within.
journal_name
Biotechnol Bioengjournal_title
Biotechnology and bioengineeringauthors
Peyton SR,Kalcioglu ZI,Cohen JC,Runkle AP,Van Vliet KJ,Lauffenburger DA,Griffith LGdoi
10.1002/bit.23027subject
Has Abstractpub_date
2011-05-01 00:00:00pages
1181-93issue
5eissn
0006-3592issn
1097-0290journal_volume
108pub_type
杂志文章abstract::Immobilization of Streptomyces phaerochromogenes was studied by radiation-induced polymerization of 2-hydroxyethyl methacrylate at low temperatures. Radiation damage of the enzyme could be avoided by choosing irradiation at low temperatures. The enzymatic activity of immobilized cells increased remarkably with a decre...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260210412
更新日期:1979-04-01 00:00:00
abstract::The influence of microheterogeneity on enzyme inactivation kinetics is examined. A continuous normal distribution of the thermal activation energy is assumed, and using this, a simple mathematical model is developed to find the activity-time trajectories for a microheterogeneous enzyme. Using an example, the model is ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260300116
更新日期:1987-07-01 00:00:00
abstract::Recycle batch fermentations using immobilized cells of Propionibacterium acidipropionici were studied for propionate production from whey permeate, de-lactose whey permeate, and acid whey. Cells were immobilized in a spirally wound fibrous sheet packed in a 0.5-L column reactor, which was connected to a 5-L stirred ta...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260450502
更新日期:1995-03-05 00:00:00
abstract::Current animal and 2-D cell culture models employed in metastasis research and drug discovery remain poor mimics of human cancer physiology. Here we describe a "metastasis-on-a-chip" system allowing real time tracking of fluorescent colon cancer cells migrating from hydrogel-fabricated gut constructs to downstream liv...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.25950
更新日期:2016-09-01 00:00:00
abstract::A novel reaction system was developed to maximize the catalytic efficiency of chloroperoxidase (CPO, from Caldariomyces fumago) toward the oxidation of hydrocarbons. The reaction system consisted of an organic/aqueous emulsion comprising pure substrate and aqueous buffer supplemented with the surfactant dioctyl sulfos...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.20769
更新日期:2006-05-05 00:00:00
abstract::This paper describes batch and semicontinuous acetic acid fermentations for wine vinegar production carried out with Acetobacter pasteurianus, and an industrial strain using a noncommercial 100-L bubble column reactor equipped with a novel type of gas-liquid dynamic sparger. Results showed acetification rates with thi...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(sici)1097-0290(19990420)63:2<141::aid-bit
更新日期:1999-04-20 00:00:00
abstract::One of the major bottlenecks in the bioconversion of lignocelluosic feedstocks to liquid ethanol is the recalcitrance of residue following pretreatment, specifically softwood derived residues. Peroxide delignification has previously been shown to effectively aid in the removal of condensed lignaceous moieties from sub...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.22768
更新日期:2010-08-15 00:00:00
abstract::Targeted gene integration into site-specific loci can be achieved in Chinese hamster ovary (CHO) cells via CRISPR/Cas9 genome editing technology and the homology-directed repair (HDR) pathway. The low efficiency of HDR often requires antibiotic selection, which limits targeted integration of multiple genes at multiple...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.26002
更新日期:2016-11-01 00:00:00
abstract::This research investigates the effect of solids retention time (SRT) on the acid-phase anaerobic digestion of primary sludge. A series of experiments were conducted using two continuous-flow 3-L units with the following configuration: a completely mixed reactor (CMR) with clarifier and solids recycle and an upflow ana...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260440103
更新日期:1994-06-05 00:00:00
abstract::Generating stable, high-producing cell lines for recombinant protein production requires an understanding of the potential limitations in the cellular machinery for protein expression. In order to increase our understanding of what makes a stable high producer, we have generated a panel of 17 recombinant monoclonal an...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.22158
更新日期:2009-03-01 00:00:00
abstract::A new type of liquid emulsion membrane containing reversed micelles for protein extraction is introduced. A three-step extraction mechanism is proposed including solubilization, transportation, and release of the protein. The surfactants Span80 and sodium di(2-ethylhexyl)sulfosuccinate (AOT) are used to stabilize the ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(SICI)1097-0290(19970205)53:3<267::AID-BIT
更新日期:1997-02-05 00:00:00
abstract::An analysis of the radial flow cell is presented to show that the assumption of creeping laminar flow should be used cautiously. Simple models which account for the influence of fluid inertial forces over most of the width of the plate are reviewed. A modified Reynolds number is introduced which may be used to test th...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260270407
更新日期:1985-04-01 00:00:00
abstract::As the therapeutic monoclonal antibody (mAb) market continues to grow, optimizing production processes is becoming more critical in improving efficiencies and reducing cost-of-goods in large-scale production. With the recent trends of increasing cell culture titers from upstream process improvements, downstream capaci...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.24377
更新日期:2012-04-01 00:00:00
abstract::In addition to the role of maintaining the pH, buffers can also facilitate the transport of H(+) ions in acid-generating systems. The role of this facilitation in proton transport in porous pellets on acid-generating immobilized enzymic reactions is examined. The activity in these systems can be maximized by a proper ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260270609
更新日期:1985-06-01 00:00:00
abstract::A major challenge when designing cell scaffolds for chondrocyte delivery in vivo is creating scaffolds with sufficient mechanical properties to restore initial function while simultaneously controlling temporal changes in the gel structure to facilitate tissue formation. To address this design challenge, degradable ph...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.20160
更新日期:2004-06-30 00:00:00
abstract::The spatial cell-material interaction remains vital issue in forming biodegradable scaffolds in Tissue Engineering. In this study, to understand the influence of spatial architecture on cellular behavior, 2D and 3D chitosan scaffolds of 50-190 kD and >310 kD MW were synthesized through air drying and controlled rate f...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.20703
更新日期:2006-01-05 00:00:00
abstract::Three micronization techniques, based on the use of supercritical carbon dioxide, were investigated to produce microspheres of a natural biocompatible polysaccharide. Particles smaller than 20 mum were obtained by means of the rapid expansion of a supercritical solution method (RESS), both with and without cosolvents....
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(SICI)1097-0290(19970120)53:2<232::AID-BIT
更新日期:1997-01-20 00:00:00
abstract::The internal regulatory processes, which underlie a variety of behavior in microbial growth on multiple substrates, are viewed as a manifestation of an invariant strategy to optimize some goal of the cells. A goal-seeking or cybernetic model is proposed here, with the optimization obased on a short-term perspective of...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260261103
更新日期:1984-11-01 00:00:00
abstract::Frozen bagged seed inoculum was prepared, thawed and tested for seven cultures. Thawing techniques were developed and other key influences on thawing rate were quantified; seed bag thawing without a water bath rarely required more than 4 to 5 h and was as short as 0.5 to 1 h for lower fill volume bags. Testing include...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.10323
更新日期:2002-09-20 00:00:00
abstract::The G-H loop of foot-and-mouth disease virus is a disordered protrusion of the VP1 protein exposed on the virion surface. This short stretch includes an arginine-glycine-aspartic acid tripeptide, a recognized integrin-binding motif, which is responsible for cell attachment and infection. Eight copies of a peptide repr...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(sici)1097-0290(19980805)59:3<294::aid-bit
更新日期:1998-08-05 00:00:00
abstract::Point and 95% confidence interval estimates of the true growth yield and maintenance coefficient are reported for four pure cultures andtwo mixed cultures of Lactobacillus bulgaricus and Streptococcus thermophilus grown anaerobically on 3% nonfat dry milk using batch followed by fed batch culture. An improved method o...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260280619
更新日期:1986-06-01 00:00:00
abstract::The conditions for the introduction of active carbonate groups into supports containing hydroxyl groups by reaction with 5-norbornene-2.3-dicarboximido carbonochloridate are described. Up to 1.5 mmol carbonate groups/g dry Sepharose 4B could be bound. In the case of glycine the reaction of the activated supports with ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.260330105
更新日期:1989-01-05 00:00:00
abstract::We propose that transcript levels for some genes are affected by the bacterial cell division cycle and this may be an important factor to consider when designing synthetic bacterial genomes. To test this hypothesis, transcript levels of 58 genes in Escherichia coli B/r A were determined at five times during the cell d...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.22098
更新日期:2009-02-15 00:00:00
abstract::There has been much effort exerted to reduce one carbon (C1) gas emission to address climate change. As one promising way to more conveniently utilize C1 gas, several technologies have been developed to convert C1 gas into useful chemicals such as formic acid (FA). In this study, systems metabolic engineering was util...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.26435
更新日期:2017-12-01 00:00:00
abstract::Urea, ammonium, and free amino acid contents were quantified in biological aging of a young wine under two flor film forming yeast strains, Saccharomyces cerevisiae race capensis and S. cerevisiae race bayanus, and compared. Cell viability in the film was different for the two yeast strains. Thus, capensis maintained ...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/(SICI)1097-0290(19970120)53:2<159::AID-BIT
更新日期:1997-01-20 00:00:00
abstract::Polypeptides containing between 4 and 32 repeats of a resilin-inspired sequence AQTPSSYGAP, derived from the mosquito Anopheles gambiae, have been used as tags on recombinant fusion proteins. These repeating polypeptides were inspired by the repeating structures that are found in resilins and sequence-related proteins...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.24565
更新日期:2012-12-01 00:00:00
abstract::We developed a model for nutrient removal in an aerobic granular sludge system. This model can quantitatively describe the start-up of the system by coupling a model for studying the population dynamics of the granules in the reactor (reactor-scale model) and a model for studying the microbial community structure in t...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.25331
更新日期:2015-01-01 00:00:00
abstract::We report on a simple method to rapidly generate very large libraries of genes encoding mutant proteins without the use of DNA amplification, and the application of this methodology in the construction of synthetic immunoglobulin variable heavy (V(H)) and light (V(kappa)) libraries. Four high quality, chemically synth...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.22712
更新日期:2010-06-15 00:00:00
abstract::It is a common practice in biotherapeutic manufacturing to define a fixed-volume feed strategy for nutrient feeds, based on historical cell demand. However, once the feed volumes are defined, they are inflexible to batch-to-batch variations in cell growth and physiology and can lead to inconsistent productivity and pr...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.25684
更新日期:2015-12-01 00:00:00
abstract::Breast cancer cells experience a range of shear stresses in the tumor microenvironment (TME). However most current in vitro three-dimensional (3D) models fail to systematically probe the effects of this biophysical stimuli on cancer cell metastasis, proliferation, and chemoresistance. To investigate the roles of shear...
journal_title:Biotechnology and bioengineering
pub_type: 杂志文章
doi:10.1002/bit.27119
更新日期:2019-11-01 00:00:00