Introduction to tissue engineering and application for cartilage engineering.

abstract：:Chitosan oligosaccharides graft polycaprolactone copolymer (PHCSO-g-PCL) has been synthesized via initiating the polymerization of e-caprolactone (CL) monomer through an amino group protection route using phthaloyl chitosan oligosaccharide (PHCSO) as intermediate. The grafting reaction was carried out in Pyridine at 1...

journal_title：Bio-medical materials and engineering

authors： Li F,Zhang X,Li H,Xiang L,Chen Y

更新日期：2014-01-01 00:00:00

abstract：:Mechanical testing has been performed to characterize the locking strength of Morse taper locks used for reconstruction of large bone defects. Taper joint pairs were locked with a series of compressive loads increasing from 500 to 3500 N. Following each load application the taper locks were distracted with either an a...

journal_title：Bio-medical materials and engineering

authors： Duda GN,Elias JJ,Valdevit A,Chao EY

更新日期：1997-01-01 00:00:00

abstract：BACKGROUND:Great potential of cellular therapies has generated extensive research in the field of cells harvesting and culturing. Transplantation of cell cultures has been used in a variety of therapeutic programs but in many cases it appeared that biomaterial scaffold or sheath would enhance cells regenerative potenti...

journal_title：Bio-medical materials and engineering

authors： Marycz K,Szarek D,Grzesiak J,Wrzeszcz K

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Access to peripheral veins is necessary for sample collection, transfusion and infusion of fluids or medications. The peripheral intravenous catheterization (PIVC) procedure is the introduction of a short catheter into a peripheral vein and can be problematic, leading to multiple failed attempts. PURPOSE:To...

journal_title：Bio-medical materials and engineering

authors： Sabri A,Szalas J,Holmes KS,Labib L,Mussivand T

更新日期：2013-01-01 00:00:00

abstract：:To better analyze images with the Gaussian white noise, it is necessary to remove the noise before image processing. In this paper, we propose a self-adaptive image denoising method based on bidimensional empirical mode decomposition (BEMD). Firstly, normal probability plot confirms that 2D-IMF of Gaussian white noise...

journal_title：Bio-medical materials and engineering

authors： Guo S,Luan F,Song X,Li C

更新日期：2014-01-01 00:00:00

abstract：:Hyaluronic acid (HA) was used as an internal phase additive to improve the loading efficiency of ofloxacin, a hydrophilic drug encapsulated by hydrophobic polylactic-co-glycolic acid (PLGA) materials, through a double emulsion (water-in-oil-in-water) solvent extraction/evaporation method. Results from laser distributi...

journal_title：Bio-medical materials and engineering

authors： Wu G,Chen L,Li H,Wang YJ

更新日期：2014-01-01 00:00:00

abstract：:Level set method has been widely used in medical image analysis, but it has difficulties when being used in the segmentation of left ventricular (LV) boundaries on echocardiography images because the boundaries are not very distinguish, and the signal-to-noise ratio of echocardiography images is not very high. In this...

journal_title：Bio-medical materials and engineering

authors： Zhang Y,Gao Y,Li H,Teng Y,Kang Y

更新日期：2015-01-01 00:00:00

abstract：BACKGROUND:The periodontal ligament (PDL), which maintains homeostasis in the periodontium, is a group of specialized connective tissue fibers attached to both the cementum and alveolar bone. Regeneration of periodontium with PDL cells has been investigated, and the chemical and molecular structures of scaffolds contro...

journal_title：Bio-medical materials and engineering

authors： Fujita K,Nozaki K,Horiuchi N,Yamashita K,Miura H,Nagai A

更新日期：2018-01-01 00:00:00

abstract：:Poly(N-substituted alpha/beta-asparagine) was evaluated as a thermoresponsible and an injectable scaffold for cartilage regeneration. Solutions of this polymer are liquid state below 25 degrees C and nonfluid hydrogel above 35 degrees C, allowing an aqueous solution containing cells at room temperature to form a hydro...

journal_title：Bio-medical materials and engineering

authors： Chueh SK,Tachibana Y,Uyama H,Kobayashi S,Tomita N

更新日期：2007-01-01 00:00:00

abstract：:A potassium-doped synthetic apatite was prepared by soaking hydroxyapatite in potassium carbonate and potassium chloride solutions. The hydroxyapatite was prepared by firing slip cast ceramic bodies in vacuum at 1100 degrees C. The conical ceramic samples and a crushed material of this were soaked in carbonate and chl...

journal_title：Bio-medical materials and engineering

authors： Nordström EG,Karlsson KH

更新日期：1992-01-01 00:00:00

abstract：BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...

journal_title：Bio-medical materials and engineering

authors： Karayeğen G,Koçum IC,Çökeli Ler Serdaroğlu D,Doğan M

更新日期：2018-01-01 00:00:00

abstract：:Resorbable ceramics can promote the bony integration of implants. Their rate of degradation should ideally be synchronized with bone regeneration. This study examined the effect of rapidly resorbable calcium phosphate ceramics 602020, GB14, 305020 on adherence, proliferation and morphology of human bone-derived cells ...

journal_title：Bio-medical materials and engineering

authors： Radetzki F,Wohlrab D,Zeh A,Delank KS,Mendel T,Berger G,Syrowatka F,Mayr O,Bernstein A

更新日期：2011-01-01 00:00:00

abstract：OBJECTIVE:To characterize the structure and to evaluate the cytotoxicity of cellulose nanowhiskers (CNW) prepared from cotton linters. METHODS:A series of CNW dispersions was prepared by hydrolyzing cotton linters with sulfuric acid. The structure of CNW was characterized by scanning electron microscopy (SEM), transmi...

journal_title：Bio-medical materials and engineering

authors： Ni H,Zeng S,Wu J,Cheng X,Luo T,Wang W,Zeng W,Chen Y

更新日期：2012-01-01 00:00:00

abstract：:Local strains acting across an area of skin loaded uniaxially in vivo are converted to stresses using the standard elastic formulae. The stress values are compared to those obtained using the classical Bossinesq and Michell stress functions. The results indicate that these functions are capable of describing the respo...

journal_title：Bio-medical materials and engineering

authors： Wan Abas WA,Asseli MR

更新日期：1994-01-01 00:00:00

abstract：:A size-based blood cell sorting model with a micro-fence structure is proposed in the frame of immersed boundary and lattice Boltzmann method (IB-LBM). The fluid dynamics is obtained by solving the discrete lattice Boltzmann equation, and the cells motion and deformation are handled by the immersed boundary method. A ...

journal_title：Bio-medical materials and engineering

authors： Wei Q,Xu YQ,Tian FB,Gao TX,Tang XY,Zu WH

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Introduction of a new generation of artificial ligaments for ACL reconstruction, the Ligament Augmentation and Reconstruction System (LARS), gives promising clinical results [1]. The current literature supports the use of LARS from short to medium term. To go even further to improve the biocompatibility of t...

journal_title：Bio-medical materials and engineering

authors： Lessim S,Migonney V,Thoreux P,Lutomski D,Changotade S

更新日期：2013-01-01 00:00:00

abstract：:Robotized endoscope holder in laparoscopic surgeries allows surgeons to control the endoscope without the assistants' intervention. In this paper, a new method is proposed for the automatic 3D-tracking of laparoscopic instruments in real-time to provide more convenient interactions between surgeons and the robotized e...

journal_title：Bio-medical materials and engineering

authors： Zhao Z

更新日期：2014-01-01 00:00:00

abstract：:Modeling of thermal-induced mechanical behaviors of soft tissues is of great importance for thermal ablation. This paper presents a method by integrating the heating process with thermal-induced mechanical deformations of soft tissues for simulation and analysis of the thermal ablation process. This method combines bi...

journal_title：Bio-medical materials and engineering

authors： Li X,Zhong Y,Jazar R,Subic A

更新日期：2014-01-01 00:00:00

abstract：:This paper presents an X-ray diffraction method of measuring the residual stress/strain in bone tissue of rabbit's tibia. To derive the residual stress, bone powder of the diameter less than 40 micrometers was used as a control specimen at non-stressed state. From the X-ray measurements, it was clear that the distribu...

journal_title：Bio-medical materials and engineering

authors： Tadano S,Okoshi T

更新日期：2006-01-01 00:00:00

abstract：BACKGROUND:Age is the most important risk factor for primary osteoarthritis (OA). Members of the TGF-β superfamily play a crucial role in chondrocyte differentiation and maintenance of healthy articular cartilage. OBJECTIVE:We have investigated whether age-related changes in TGF-β superfamily signaling components play...

journal_title：Bio-medical materials and engineering

authors： van der Kraan PM

更新日期：2014-01-01 00:00:00

abstract：:Intensity-Modulated Radiation Therapy (IMRT) mathematically forms a large-scale optimization problem. The development of an IMRT plan is computationally expensive resulting in time-consuming, inefficient, and difficult to develop high-quality IMRT plans. By combining prior knowledge with proposed novel measures derive...

journal_title：Bio-medical materials and engineering

authors： Zhou Z,Chen Y,Yu Z,Wang D,Zhao C,Xu J,Song W,Li B,Shen J,Zhu X

更新日期：2014-01-01 00:00:00

abstract：PURPOSE:To establish a method for mouse coronary angiography in vivo using synchrotron radiation, which is essential for physiological and pathological research on coronary diseases. METHODS:1) The imaging parameters (e.g., photon energy, spatial resolution of the detector, and injection rate of contrast agent) optima...

journal_title：Bio-medical materials and engineering

authors： Xu L,Zhang A,Du G,Xie H,Chen Y

更新日期：2014-01-01 00:00:00

abstract：:The 5(and 6)-carboxyfluorescein diacetate (C-FDA) is used for a rapid and continuous counting of living cells. Nonfluorescent C-FDA is converted into fluorescent 5(and 6)-carboxyfluorescein (C-F) by the reaction with esterase, which is an enzyme of living cells. The conversion makes it possible to count the number of ...

journal_title：Bio-medical materials and engineering

authors： Sugata K,Ohnishi T,Matsumoto K

更新日期：1991-01-01 00:00:00

abstract：OBJECTIVES:to assess reliability and reproducibility of quantitative MRI (7 T) in assessing rat femoro-tibial cartilage volume. METHODS:5 healthy rat knees were scanned in vivo using a 7 T experimental imager. Sagittal high resolution 3D Gradient Echo with fat suppression sequences were performed with a dedicated home...

journal_title：Bio-medical materials and engineering

authors： Goebel JC,Bolbos R,Pinzano A,Schaeffer M,Rengle A,Galois L,Etienne S,Netter P,Loeuille D,Beuf O,Gillet P

更新日期：2008-01-01 00:00:00

abstract：:Reoperation of aldehyde tanned bioprotheses due to calcific degeneration remains their major drawback. Based on experiments studying mechanisms and factors that influence the time phase, extent and progression of calcification and evaluating the efficiency of anticalcification treatments and the effects of surface see...

journal_title：Bio-medical materials and engineering

authors： Dahm M,Rühe J,Berchthold B,Prüfer D,Prucker O,Chang BJ,Wallrath A,Oelert H

更新日期：2004-01-01 00:00:00

abstract：:A fracture mechanics approach has been adopted in the present study to investigate the fracture toughness behavior of three commercial composite resins for dental use named Clearfil photo posterior, P-50 and Occlusin. The resins have been cast in to ring-shaped specimens for the determination of individual fracture to...

journal_title：Bio-medical materials and engineering

authors： Higo Y,Damri D,Nunomura S,Kumada K,Sawa N,Hanaoka K,Teranaka T,Iwamoto T

更新日期：1991-01-01 00:00:00

abstract：:Fracture toughness (KIC), critical stress intensity factor, and bending strength of 3 types of commercially available dental composite resins (macrofilled, hybrid and microfilled type) were determined using three point bend specimens. Acoustic Emission (AE), which is the generation of elastic wave due to the release o...

journal_title：Bio-medical materials and engineering

authors： Kim KH,Park JH,Imai Y,Kishi T

更新日期：1991-01-01 00:00:00

abstract：:A layer of L-glycine-molecule-imprinted polyaniline (LMIP-PANI) polymer film has been modified on a carbon fiber electrode for the determination of L-glycine standard samples and L-glycine in cerebrospinal fluid of wistar mice. It has been found that a linear relationship exists between current and concentration for t...

journal_title：Bio-medical materials and engineering

authors： Zeng H,Wang D,Yu J

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Surface replication is a nondestructive evaluation technique applied in examining surface wear by recording surface irregularities, especially in conditions when surfaces of interest cannot be further manipulated to fit directly under a microscope to be examined. Enamel is the outermost protective layer of t...

journal_title：Bio-medical materials and engineering

authors： Ijbara M,Wada K,Wada J,Jayawardena JA,Miyashin M

更新日期：2020-01-01 00:00:00

abstract：:Morse code is now being harnessed for use in rehabilitation applications of augmentative-alternative communication and assistive technology, including mobility, environmental control and adapted worksite access. In this paper, Morse code is selected as a communication adaptive device for disabled persons who suffer fr...

journal_title：Bio-medical materials and engineering

authors： Yang CH,Luo CH,Yang CH,Chuang LY

更新日期：2004-01-01 00:00:00