Percolation theory and the role of maize starch as a disintegrant for a low water-soluble drug.

abstract：:The physical-chemical processing variables affecting particle size following precipitation using the supercritical antisolvent (SAS) method were investigated by varying both the composition of the feed solvent and the structure of the solute, using a series of steroids. The key factor influencing particle size in thes...

journal_title：Pharmaceutical development and technology

authors： Sacha GA,Schmitt WJ,Nail SL

更新日期：2006-01-01 00:00:00

abstract：:To develop an effective therapeutic treatment, the potential of poly (lactic-co-glycolic acid)-polyethylene glycol-retinoic acid (PLGA-PEG-RA) polymeric micelles for targeted delivery of irinotecan to hepatocellular carcinoma (HepG2) and colorectal cancer cell lines (HT-29) was evaluated. PLGA-PEG-RA was synthesized b...

journal_title：Pharmaceutical development and technology

authors： Emami J,Maghzi P,Hasanzadeh F,Sadeghi H,Mirian M,Rostami M

更新日期：2018-01-01 00:00:00

abstract：:The object of this study was to enhance the solubility, dissolution rate, and oral bioavailability of rutin by complexation with 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD). The interaction of rutin with cyclodextrins (CyDs) was evaluated by the solubility, and ultraviolet (UV) and circular dichroism (CD) spectrop...

journal_title：Pharmaceutical development and technology

authors： Miyake K,Arima H,Hirayama F,Yamamoto M,Horikawa T,Sumiyoshi H,Noda S,Uekama K

更新日期：2000-01-01 00:00:00

abstract：:Seven potential impurities, including by-products, starting materials and intermediates were identified in pharmaceutical substance quetiapine fumarate and characterized by spectroscopic methods (MS, IR, NMR). Based on these methods the structures of the impurities were assigned or confirmed as: impurity I: 2-(phenylt...

journal_title：Pharmaceutical development and technology

authors： Stolarczyk EU,Kaczmarek L,Eksanow K,Kubiszewski M,Glice M,Kutner A

更新日期：2009-01-01 00:00:00

abstract：:The purpose of this study was to improve the sensitivity and accuracy of quantitative analysis of polymorphic mixtures. Various techniques such as hand grinding and mixing (in mortar and pestle), air jet milling and ball milling for micronization of particle and mixing were used to prepare binary mixtures. Using these...

journal_title：Pharmaceutical development and technology

authors： Alam S,Patel S,Bansal AK

更新日期：2010-09-01 00:00:00

abstract：:The oral administration route is considered to be the most widely used route because of its convenience of administration and manufacturing. Dosage forms, like orally disintegrating tablets (ODTs), mini tablets, and orally disintegrating mini tablets (ODMTs), are recognized as promising for use in pediatric patients. ...

journal_title：Pharmaceutical development and technology

authors： Comoglu T,Dilek Ozyilmaz E

更新日期：2019-09-01 00:00:00

abstract：:The aim of this study was to prepare electrospun polyvinylpyrrolidone (PVP)/2-hydroxypropyl-β-cyclodextrin (HPβCD) nanofiber mats and to incorporate plai oil (Zingiber Cassumunar Roxb.). The plai oil with 10, 20 and 30% wt to polymer were incorporated in the PVP/HPβCD solution and electrospun to obtain nanofibers. The...

journal_title：Pharmaceutical development and technology

authors： Tonglairoum P,Chuchote T,Ngawhirunpat T,Rojanarata T,Opanasopit P

更新日期：2014-06-01 00:00:00

abstract：:The hygroscopicity of Brequinar sodium, an organ transplant immunosuppressant, at 75% relative humidity highly depends on the crystal form or crystallinity of the drug substance. Hygroscopicity and ease of water uptake of three lots of Brequinar sodium were investigated. Those lots contained different impurities at le...

journal_title：Pharmaceutical development and technology

authors： Wu LS,Pang J,Hussain MA

更新日期：1996-04-01 00:00:00

abstract：:The key for better antitumor efficacy is to improve the specificity of antitumor drugs for tumor cells and diminish their cytotoxicity to normal tissues. Targeted nanoparticles as antitumor drug delivery system can resolve this problem. In this study, we prepared folate and TAT (arginine-rich cell-penetrating peptide)...

journal_title：Pharmaceutical development and technology

authors： Zhang S,Liu Y,Gan Y,Qiu N,Gu Y,Zhu H

更新日期：2019-02-01 00:00:00

abstract：:A new approach to developing a drug-polymer mixed coat for highly water-soluble diltiazem pellets was investigated at different coating levels. Drug layering and the coating procedures were performed using a bottom spray fluidized bed coater. Drug pellets were coated with Eudragit NE40 (NE40) alone and in combination ...

journal_title：Pharmaceutical development and technology

authors： Nisar ur Rahman,Yuen KH,Khan NA,Wong JW

更新日期：2006-02-01 00:00:00

abstract：:In recent years, drug delivery systems such as liposomes and microparticles have been used in clinic for the treatment of different diseases and from a regulatory point of view, a parenterally applied drug and drug delivery systems must be sterile and pyrogen free. Radiation sterilization is a method recognized by pha...

journal_title：Pharmaceutical development and technology

authors： Sakar F,Özer AY,Erdogan S,Ekizoglu M,Kart D,Özalp M,Colak S,Zencir Y

更新日期：2017-09-01 00:00:00

abstract：:Hypericin (Hyp), a natural hydrophobic and photoactive pigment, and methylene blue (MB), a hydrophilic cationic dye, are utilized as photosensitizer (PS) for photodynamic therapy of cancer. Bioadhesive and thermoresponsive polymeric systems can improve the drug availability by increasing the contact time between the s...

journal_title：Pharmaceutical development and technology

authors： Borghi-Pangoni FB,Junqueira MV,Bruschi ML

更新日期：2020-04-01 00:00:00

abstract：:The taste of oral dosage forms is an important argument regarding patient's compliance and acceptability. For this reason, it is often necessary to mask an undesirable and unpleasant taste of an active pharmaceutical ingredient. The purpose of this study was to mask the taste of naproxen sodium by a new fluid-bed coat...

journal_title：Pharmaceutical development and technology

authors： Stange U,Führling C,Gieseler H

更新日期：2014-03-01 00:00:00

abstract：:Fixed dose combination (FDC) products are common in the treatment of hypertension, diabetes, human immunodeficiency virus, and tuberculosis. They make it possible to combine two or more drug molecules with different modes of pharmacological actions in a single dosing unit and optimize the treatment. From a patient per...

journal_title：Pharmaceutical development and technology

authors： Desai D,Wang J,Wen H,Li X,Timmins P

更新日期：2013-11-01 00:00:00

abstract：:The objective of this investigation was to formulate ocular inserts of gatifloxacin sesquehydrate to achieve controlled drug release. Drug reservoir was prepared using hydrophilic polymers, namely polyvinyl alcohol and polyvinyl pyrrolidone. The rate controlling membrane was prepared using hydrophobic ethyl cellulose ...

journal_title：Pharmaceutical development and technology

authors： Patel UL,Chotai NP,Nagda CD

更新日期：2012-01-01 00:00:00

abstract：:Microgels were prepared by cinnamic acid-gelatin (type B) conjugate (CA-GelB) and cinnamic acid-Pluronic F127 conjugate (CA-Plur). (1)H NMR confirmed that CA was conjugated to gelatin and the gelatin to CA residue molar ratio was estimated to be 1:4.7 by a colorimetric method. CA-Plur of which the CA residue to Plur m...

journal_title：Pharmaceutical development and technology

authors： Zhang H,Kim JC

更新日期：2016-01-01 00:00:00

abstract：:Pharmaceutical aerosols have the potential to prevent pulmonary infectious diseases. Liposomal amphotericin B (LAMB, Ambisome, Astellas Pharma US, Deerfield, IL, USA) is approved as an intravenous infusion for empiric treatment of presumed fungal infections in neutropenic, febrile patients, as well as patients infecte...

journal_title：Pharmaceutical development and technology

authors： Alexander BD,Winkler TP,Shi S,Dodds Ashley ES,Hickey AJ

更新日期：2011-11-01 00:00:00

abstract：:In the pharmaceutical industry, chemometrics is rapidly establishing itself as a tool that can be used at every step of product development and beyond: from early development to commercialization. This set of multivariate analysis methods allows the extraction of information contained in large, complex data sets thus ...

journal_title：Pharmaceutical development and technology

authors： Ferreira AP,Tobyn M

更新日期：2015-01-01 00:00:00

abstract：:Objective: Tanshinone IIA (TSN) and Tetramethylpyrazine (TMP) were combined in a composite, oil-in-water nanoemulsions (TSN/TMP O/W NEs) was prepared to prolong in vitro and vivo circulation time, and enhance the bioavailability of TSN. Material and methods: Physicochemical characterization of TSN/TMP O/W NEs was char...

journal_title：Pharmaceutical development and technology

authors： Wang B,Hong L,Liu Y,Bedingfield SK,Zhang C,Peng C,Qian J,Zha L

更新日期：2019-12-01 00:00:00

abstract：:Submicron colloidal suspensions of poly(epsilon-caprolactone) (PCL) were prepared by the solvent displacement method, using either the conventional form or a new recirculation device. In the latter case, a process that allows the recirculation of the aqueous phase into a device, providing a continuous flow, is propose...

journal_title：Pharmaceutical development and technology

authors： Piñón-Segundo E,Ganem-Quintanar A,Rafael Garibay-Bermúdez J,Juan Escobar-Chávez J,López-Cervantes M,Quintanar-Guerrero D

更新日期：2006-01-01 00:00:00

abstract：:Dynamic image analysis (DIA) was used to measure particle diameter (D50) of in-process samples removed during fluid bed coating. A single, rapid measurement gave D50 to within 4 mum. Samples removed at intervals of 2% weight gain were readily distinguishable by DIA and by their drug release profiles. Drug release was ...

journal_title：Pharmaceutical development and technology

authors： Heinicke G,Schwartz JB

更新日期：2006-01-01 00:00:00

abstract：:The purpose of this work was to investigate the effect that changes in design and process variables had on the movement of particles around a fluidized bed coating apparatus. To measure the mean and variance of the particle cycle time distribution (CTD), the number of passages taken by a magnetic tracer particle throu...

journal_title：Pharmaceutical development and technology

authors： Cheng XX,Turton R

更新日期：2000-01-01 00:00:00

abstract：:The principal purpose of the present study was to prepare and characterize a complex drug delivery system consisting of Nafarelin-poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles (NPs) in combination with sodium alginate/poloxamer 407 in situ gel. Nafarelin-loaded PHBV NPs were prepared via double em...

journal_title：Pharmaceutical development and technology

authors： Alizadeh B,Bahari Javan N,Akbari Javar H,Khoshayand MR,Dorkoosh F

更新日期：2018-02-01 00:00:00

abstract：CONTEXT:Freeze-drying in presence of excipients is a common practice to stabilize biomacromolecular formulations. The composition of this formulation is known to affect the quality of the final product. OBJECTIVE:The aim of this study was to evaluate freeze-drying in well-plates as a high throughput platform for formu...

journal_title：Pharmaceutical development and technology

authors： Trnka H,Rantanen J,Grohganz H

更新日期：2015-01-01 00:00:00

abstract：:Letrozole (LTZ), an aromatase inhibitor used for the treatment of hormonally-positive breast cancer in postmenopausal women, has poor water solubility, rapid metabolism, and a range of side effects. In this study, polymer-based nanoparticles (NPs) incorporating the drug have been designed and characterized, aimed to c...

journal_title：Pharmaceutical development and technology

authors： Alemrayat B,Elhissi A,Younes HM

更新日期：2019-02-01 00:00:00

abstract：:The use of rice bran (RB), soybean (SB) or sunflower seed (SF) oils to prepare lipid-core nanocapsules (LNCs) as controlled drug delivery systems was investigated. LNCs were prepared by interfacial deposition using the preformed polymer method. All formulations showed negative zeta potential and adequate nanotechnolog...

journal_title：Pharmaceutical development and technology

authors： Rigo LA,Frescura V,Fiel L,Coradini K,Ourique AF,Emanuelli T,Quatrin A,Tedesco S,Silva CB,Guterres SS,Pohlmann AR,Beck RC

更新日期：2014-11-01 00:00:00

abstract：:Controlled release of a marker drug, 4,4'-bis(2-sulfostyryl) biphenyl (DSBP) from genipin crosslinked gelatin thin films, with application to drug delivery by transdermal patches is studied in this paper. A simple method for fabrication of nano-thin films, using basic lab equipment is introduced. This method consists ...

journal_title：Pharmaceutical development and technology

authors： Abbasi A,Eslamian M,Heyd D,Rousseau D

更新日期：2008-01-01 00:00:00

abstract：:This paper assesses the cause of particulate formation in vials of the experimental antitumor agent bisnafide and investigates pharmaceutical techniques to reduce the number of particulates in the product. Solution preparation and particulate isolation were performed under Class 100 laminar air flow. Reversed-phase HP...

journal_title：Pharmaceutical development and technology

authors： Rubino JT,Chan LL,Walker JT,Segretario J,Everlof JG,Hussain MA

更新日期：1999-08-01 00:00:00

abstract：:This study explored the application of chitosan-alginate (CA) and chitosan-pectin (CP) complex films as drug release regulator for the preparation of multiunit controlled-release diclofenac sodium capsules. Pellets containing drug and microcrystalline cellulose, in a ratio of 3:5, were prepared in a fluidized rotary g...

journal_title：Pharmaceutical development and technology

authors： Mitrevej A,Sinchaipanid N,Rungvejhavuttivittaya Y,Kositchaiyong V

更新日期：2001-08-01 00:00:00

abstract：:The dry coating process was evaluated in terms of storage stability investigating drug release and agglomeration tendency of the different coated oral dosage forms; hydroxypropyl methylcellulose acetate succinate (HPMCAS) was used with triethylcitrate (TEC) as plasticizer and acetylated monoglyceride (Myvacet) as wett...

journal_title：Pharmaceutical development and technology

authors： Kablitz CD,Urbanetz NA

更新日期：2009-01-01 00:00:00