当前位置： SCI文献检索 > CLINICAL ORAL IMPLANTS RESEARCH期刊下所有文献 > Comparative evaluation of casting retention using the ITI solid abutment with six cements.

Comparative evaluation of casting retention using the ITI solid abutment with six cements.

Abstract：

OBJECTIVE:The purpose of this study was to test the retention of metal copings fabricated to fit on the one-groove, one flat-sided solid titanium abutment using six different cements. MATERIALS AND METHODS:Ten hollow screw 3.8 mm ITI implants were mounted in acrylic resin blocks. A solid titanium abutment was placed on each implant and torqued at 35 Ncm. Prefabricated burn-out caps were placed on the titanium abutment and wax loops added to the occlusal surface to allow for subsequent retention testing. All plastic caps were embedded in phosphate-bonded investment and cast with noble alloy. Castings were inspected for surface irregularities using a stereomicroscope at 10x magnification. The six cements were: 1) eugenol-free zinc oxide (Temp Bond NE); 2) zinc-oxide eugenol (IRM); 3) zinc phosphate (Hy-Bond); 4) resin-modified glass ionomer (Protec Cem); 5) zinc polycarboxylate (Durelon) and 6) 10-methacryloyloxydecyl dihydrogen phosphate resin (Panavia 21). After cementation, implant-abutment-casting assemblies were stored for 24 h in 100% humidity. Samples were subjected to a pull-out test using an Instron universal testing machine at a crosshead speed of 0.5 mm/min. The load required to de-cement each coping was recorded and mean values for each group calculated. Means and standard deviations of loads at failure were analyzed using ANOVA and a Tukey studentized test. Statistical significance was set at P < or = 0.05. RESULTS:The mean values (+/- SD) of loads in kilograms at failure (n = 10) for the various cements were as follows: Temp Bond 3.18 (+/- 1.1) (Tukey group D), IRM 9.25 (+/- 3.83) (Tukey group CD), HY-Bond 10.9 (+/- 6.52) (Tukey group C), Protec Cem 18.98 (+/- 6.23) (Tukey group B), Durelon 23.55 (+/- 4.29) (Tukey group B) and Panavia 21, 36.53 (+/- 8.1) (Tukey group A). Means with the same letter in the Tukey grouping are not significantly different. CONCLUSIONS:The retention values of castings cemented to ITI solid abutments have not been reported in the literature. Within the limitations of this in vitro study, the results do not suggest that one cement type is better than another, but they do provide a ranking order of the cements in their ability to retain the castings. This ranking is somehow different than that obtained when the same cements are used on natural teeth. The material and surface characteristics of the implant abutment are likely responsible for this difference. Cement retention values obtained from studies that use teeth as abutments may be misleading when used in cement-retained implant-supported crowns. It is at the clinician's discretion to use a certain type of cement, based on the situation at hand.

journal_name

Clin Oral Implants Res

journal_title

Clinical oral implants research

authors

Mansour A,Ercoli C,Graser G,Tallents R,Moss M

doi

10.1034/j.1600-0501.2002.130401.x

subject

Has Abstract

pub_date

2002-08-01 00:00:00

pages

343-8

issue

eissn

0905-7161

issn

1600-0501

pii

clr130401

journal_volume

pub_type

杂志文章

在线工具

Comparative evaluation of casting retention using the ITI solid abutment with six cements.