当前位置： SCI文献检索 > BIOTECHNOLOGY AND BIOENGINEERING期刊下所有文献 > Continuous foaming for protein recovery: part II. Selective recovery of proteins from binary mixtures.

Continuous foaming for protein recovery: part II. Selective recovery of proteins from binary mixtures.

Abstract：

:Foam separation may have potential for protein recovery. However, for foam separation to be a viable protein recovery technique it is important to demonstrate, not only that high enrichments and recoveries can be achieved for single proteins, but also that high enrichments and recoveries, together with selectivity of partition, can be achieved for recovery from multi-component mixtures. Most process streams which require purification are indeed complex multi-component mixtures, for example, fermentation broths. In this study, three binary protein mixtures were chosen for continuous foam separation: beta-casein:lysozyme; Bovine serum albumin (BSA):lysozyme and beta-casein:BSA (mixtures 1, 2, and 3, respectively). For each of these mixtures, the expected outcome of each experiment, based on a previous knowledge and determination of relevant protein physical properties, was that the first protein should be preferentially separated into the foam phase. On the basis of results reported in Part I of this study for the continuous foam separation of beta-casein, conditions found to favor maximum enrichment were selected. For each mixture a range of concentrations of both proteins was considered. For mixture 1, maximum protein recoveries in the foam phase were 85.6% and 25% for beta-casein and lysozyme, respectively; and for mixture 2, maximum recoveries of 77. 6% and 18.9% were obtained for BSA and lysozyme, respectively. Maximum enrichment ratios in the foam phase were 79.4 and 2.5 for beta-casein and lysozyme respectively in mixture 1; and 74.0 and 1.4 for BSA and lysozyme respectively in mixture 2. Selective partitioning of beta-casein and BSA into the foam phase was obtained in mixtures 1 and 2, respectively, particularly for protein concentrations at which dilute protein films are known to form at the gas-liquid interface in the foam. Maximum partition ratios for mixtures 1 and 2 were 31.8 and 52.8, respectively. For mixture 3, both BSA and beta-casein were enriched into the foam phase. Maximum enrichments were 42.9 and 24.7 for BSA and beta-casein, respectively; however, selective partitioning in mixture 3 was limited (maximum partition ratio being 1.8).

journal_name

Biotechnol Bioeng

journal_title

Biotechnology and bioengineering

authors

Brown AK,Kaul A,Varley J

doi

10.1002/(sici)1097-0290(19990205)62:3<291::aid-bit

subject

Has Abstract

pub_date

1999-02-05 00:00:00

pages

291-300

issue

eissn

0006-3592

issn

1097-0290

pii

10.1002/(SICI)1097-0290(19990205)62:3<291::AID-BIT

journal_volume

pub_type

杂志文章

在线工具

Continuous foaming for protein recovery: part II. Selective recovery of proteins from binary mixtures.