Culture of human vascular endothelial cells on an RGD-containing synthetic peptide attached to a starch-coated polystyrene surface: comparison with fibronectin-coated tissue grade polystyrene.

Abstract:

:A synthetic peptide, Gly-Arg-Gly-Asp-Ser-Pro-Lys (GRGDSPK), which includes the cell-adhesive region of fibronectin, Arg-Gly-Asp (RGD), was covalently bound to a dialdehyde starch (DAS) coating on a polymer surface by reductive amination. The GRGDSPK/DAS-coated surface was characterized by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). AFM and SEM revealed a uniform, roughened, textured surface, much more so than standard polymer or adhesive protein-coated polymer surfaces. XPS showed that GRGDSPK binding to DAS occurred in dose-dependent fashion in the 0-200 micrograms ml-1 GRGDSPK concentration range, with a plateau happening in the 200-400 micrograms ml-1 range. AFM revealed a uniform peptide layer on the DAS surface with a maximum separation distance of 50 nm between peptides. Angle-dependent XPS showed that the peptide is present in nearly constant amounts to at least 10 nm depth of the DAS coating. The attachment, spreading and growth properties of anchorage-dependent human umbilical vein endothelial cells (EC) on the GRGDSPK/DAS-coated polystyrene surface were compared with a standard fibronectin-coated polystyrene surface. EC adhesion, spreading and growth properties were similar for cells plated on polystyrene surfaces coated with fibronectin (5 micrograms cm-2) and GRGDSPK (25-50 micrograms ml-1)/DAS. In contrast, EC adhesion, spreading and growth performance significantly increased for cells plated on GRGDSPK (100-200 micrograms ml-1)/DAS compared with the fibronectin-coated surface. These findings support the conclusion that the GRGDSPK/DAS-coated surface can be substituted for an adhesive protein-coated surface in the culture of anchorage-dependent cells.

journal_name

Biomaterials

journal_title

Biomaterials

authors

Holland J,Hersh L,Bryhan M,Onyiriuka E,Ziegler L

doi

10.1016/0142-9612(96)00028-2

subject

Has Abstract

pub_date

1996-11-01 00:00:00

pages

2147-56

issue

22

eissn

0142-9612

issn

1878-5905

pii

0142961296000282

journal_volume

17

pub_type

杂志文章
  • Photoacoustic imaging of living mouse brain vasculature using hollow gold nanospheres.

    abstract::Photoacoustic tomography (PAT) also referred to as optoacoustic tomography (OAT) is a hybrid imaging modality that employs nonionizing optical radiation and ultrasonic detection. Here, we describe the application of a new class of optical contrast agents based on mesoscopic hollow gold nanospheres (HAuNS) to PAT. HAuN...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.12.007

    authors: Lu W,Huang Q,Ku G,Wen X,Zhou M,Guzatov D,Brecht P,Su R,Oraevsky A,Wang LV,Li C

    更新日期:2010-03-01 00:00:00

  • Fluoride ion diffusion from polyalkenoate (glass-ionomer) cements.

    abstract::Long-term elution of fluoride ions has been studied for one silicate and six glass-ionomer cements over a period of some two and-a-half years. Because equilibrium was not reached, classical diffusion theory could not be applied to the process. It was postulated that two elution processes were taking place, one short-t...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(88)90012-9

    authors: Tay WM,Braden M

    更新日期:1988-09-01 00:00:00

  • The maintenance of pluripotency following laser direct-write of mouse embryonic stem cells.

    abstract::The ability to precisely pattern embryonic stem (ES) cells in vitro into predefined arrays/geometries may allow for the recreation of a stem cell niche for better understanding of how cellular microenvironmental factors govern stem cell maintenance and differentiation. In this study, a new gelatin-based laser direct-w...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.11.015

    authors: Raof NA,Schiele NR,Xie Y,Chrisey DB,Corr DT

    更新日期:2011-03-01 00:00:00

  • Interaction of human valve interstitial cells with collagen matrices manufactured using rapid prototyping.

    abstract::Rapid prototyping is a novel process for the production of scaffolds of predetermined size and three-dimensional shape. The aim of the study was to determine the feasibility of this technology for producing scaffolds for tissue engineering an aortic valve and the optimal concentration of collagen processed in this man...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2005.12.003

    authors: Taylor PM,Sachlos E,Dreger SA,Chester AH,Czernuszka JT,Yacoub MH

    更新日期:2006-05-01 00:00:00

  • The performance of gamma- and EtO-sterilised UHMWPE acetabular cups tested under severe simulator conditions. Part 2: wear particle characteristics with isolation protocols.

    abstract::Ultra-high molecular-weight polyethylene (UHMWPE) has been used in total joint replacement for the last three decades. Despite the recent advancements in prosthesis design, the wear of UHMWPE remains a serious clinical problem; the release of wear debris may induce osteolysis and implant loosening. Controlling the qua...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(03)00264-3

    authors: Affatato S,Bersaglia G,Emiliani D,Foltran I,Taddei P,Reggiani M,Ferrieri P,Toni A

    更新日期:2003-10-01 00:00:00

  • FRET-enabled monitoring of the thermosensitive nanoscale assembly of polymeric micelles into macroscale hydrogel and sequential cognate micelles release.

    abstract::Thermosensitive "micellar hydrogel" is prepared based on poly(ε-caprolactone-co- 1,4,8-trioxa[4.6]spiro-9-undecanone)-b-poly(ethylene glycol)- b-poly(ε-caprolactone- co-1,4,8-trioxa[4.6]spiro-9-undecanone) (PECT) triblock copolymer. Fluorescence resonance energy transfer (FRET) is adopted to explore its assembly (form...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2017.07.012

    authors: Huang P,Song H,Zhang Y,Liu J,Cheng Z,Liang XJ,Wang W,Kong D,Liu J

    更新日期:2017-11-01 00:00:00

  • Integrin beta1 silencing in osteoblasts alters substrate-dependent responses to 1,25-dihydroxy vitamin D3.

    abstract::Surface microroughness increases osteoblast differentiation and enhances responses of osteoblasts to 1,25-dihydroxyvitamin D3 [1alpha,25(OH)2D3]. The observations that beta1 integrin expression is increased in osteoblasts grown on Ti substrates with rough microarchitecture, and that it is regulated by 1alpha,25(OH)2D3...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2006.02.022

    authors: Wang L,Zhao G,Olivares-Navarrete R,Bell BF,Wieland M,Cochran DL,Schwartz Z,Boyan BD

    更新日期:2006-07-01 00:00:00

  • Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique.

    abstract::One of the main issues in orthopaedic implant design is the fabrication of scaffolds that closely mimic the biomechanical properties of the surrounding bone. This research reports on a multi-stage rapid prototyping technique that was successfully developed to produce porous titanium scaffolds with fully interconnected...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.05.032

    authors: Ryan GE,Pandit AS,Apatsidis DP

    更新日期:2008-09-01 00:00:00

  • Immunomodulatory injectable silk hydrogels maintaining functional islets and promoting anti-inflammatory M2 macrophage polarization.

    abstract::Islet transplantation is considered the most promising treatment for type 1 diabetes. However, the clinical success is limited by islet dysfunction in long-term culture. In this study, we have utilized the rapid self-gelation and injectability offered by blending of mulberry silk (Bombyx mori) with non-mulberry (Anthe...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2018.09.037

    authors: Kumar M,Gupta P,Bhattacharjee S,Nandi SK,Mandal BB

    更新日期:2018-12-01 00:00:00

  • Quality control assessment of ePTFE precoating procedure for in vitro endothelial cell seeding.

    abstract::Over the past two decades, in vitro autologous endothelial cell (EC) coverage of expanded polytetrafluoroethylene (ePTFE) graft has been developed and clinically applied with success in infrainguinal bypasses. Before endothelialization, the luminal surface of the graft has to be coated with a currently used fibrinolyt...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2005.01.011

    authors: Fernandez P,Deguette A,Pothuaud L,Belleannée G,Coste P,Bordenave L

    更新日期:2005-08-01 00:00:00

  • A bFGF-releasing silk/PLGA-based biohybrid scaffold for ligament/tendon tissue engineering using mesenchymal progenitor cells.

    abstract::An ideal scaffold that provides a combination of suitable mechanical properties along with biological signals is required for successful ligament/tendon regeneration in mesenchymal stem cell-based tissue engineering strategies. Among the various fibre-based scaffolds that have been used, hybrid fibrous scaffolds compr...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.01.004

    authors: Sahoo S,Toh SL,Goh JC

    更新日期:2010-04-01 00:00:00

  • When stem cells meet graphene: Opportunities and challenges in regenerative medicine.

    abstract::Recent advances in stem cell research and nanotechnology have significantly influenced the landscape of tissue engineering and regenerative medicine. Precise and reproducible control of the fate of stem cells and their lineage specification have, therefore, become more crucial than ever for the success of stem cell-ba...

    journal_title:Biomaterials

    pub_type: 杂志文章,评审

    doi:10.1016/j.biomaterials.2017.10.004

    authors: Kenry,Lee WC,Loh KP,Lim CT

    更新日期:2018-02-01 00:00:00

  • Bioelectrochemical control of neural cell development on conducting polymers.

    abstract::Electrically conducting polymers hold promise for developing advanced neuroprostheses, bionic systems and neural repair devices. Among them, poly(3, 4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) exhibits superior physicochemical properties but biocompatibility issues have limited its use. We d...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.08.057

    authors: Collazos-Castro JE,Polo JL,Hernández-Labrado GR,Padial-Cañete V,García-Rama C

    更新日期:2010-12-01 00:00:00

  • Non-invasive monitoring of cell metabolism and lipid production in 3D engineered human adipose tissues using label-free multiphoton microscopy.

    abstract::Non-linear optical microscopy methods can characterize over time multiple functional properties of engineered tissues during development. Here, we demonstrate how the combined use of third-harmonic generation (THG) and two-photon excited fluorescence (2PEF) imaging can provide direct quantitative biomarkers of adipoge...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.07.066

    authors: Chang T,Zimmerley MS,Quinn KP,Lamarre-Jouenne I,Kaplan DL,Beaurepaire E,Georgakoudi I

    更新日期:2013-11-01 00:00:00

  • Engineered, self-assembled near-infrared photothermal agents for combined tumor immunotherapy and chemo-photothermal therapy.

    abstract::New combination therapy strategy, which takes the advantages of co-delivery two or more therapeutic agents in one nanocarrier platform, has been widely used in the clinic and achieved immense popularity in cancer treatment. Here, we have rationally developed a multifunctional platform using a self-assembly strategy to...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2014.04.073

    authors: Tao Y,Ju E,Liu Z,Dong K,Ren J,Qu X

    更新日期:2014-08-01 00:00:00

  • Biodegradable three-dimensional networks of poly(dimethylamino ethyl methacrylate). Synthesis, characterization and in vitro studies of structural degradation and cytotoxicity.

    abstract::In ophthalmology, there is a need for novel degradable biomaterials for e.g. controlled drug release in the vitreous body. These degradable materials should feature both excellent biocompatibility, and well-defined kinetics of degradation. In most cases, poly(D,L-lactic acid), or poly(lactic-co-glycolic acid) are used...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(99)00223-9

    authors: Bruining MJ,Blaauwgeers HG,Kuijer R,Pels E,Nuijts RM,Koole LH

    更新日期:2000-03-01 00:00:00

  • Synthesis and properties of amphiphilic networks. 1: the effect of hydration and polymer composition on the adhesion of immunoglobulin-G to poly(laurylmethacrylate-stat-glycerolmonomethacrylate-stat-ethylene-gly col-dimethacrylate) networks.

    abstract::A series of hydrogels composed of varying fractions of dodecyl methacrylate (DM) and 2,3-dihydroxypropyl methacrylate (GM) were prepared using ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent. The study found that for a series of gels with the same monomer ratio, bulk hydration could be controlled by ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(99)00245-8

    authors: Haigh R,Rimmer S,Fullwood NJ

    更新日期:2000-04-01 00:00:00

  • The potential role of free chitosan in bone trauma and bone cancer management.

    abstract::Bone defects caused by fractures or cancer-mediated destruction are debilitating. Chitosan is commonly used in scaffold matrices for bone healing, but rarely as a free drug. We demonstrate that free chitosan promotes osteoblast proliferation and osteogenesis in mesenchymal stem cells, increases osteopontin and collage...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2014.05.087

    authors: Tan ML,Shao P,Friedhuber AM,van Moorst M,Elahy M,Indumathy S,Dunstan DE,Wei Y,Dass CR

    更新日期:2014-09-01 00:00:00

  • Encapsulation of individual living cells with enzyme responsive polymer nanoshell.

    abstract::Cell delivery in cell therapy is typically challenged by the low cell survival rate and immunological rejection during cells injection and circulation. Encapsulation of cells with semipermeable hydrogels or membranes can improve cell viability by resisting high shear force and inhibit immune response with the physical...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2019.01.029

    authors: Yang J,Yang Y,Kawazoe N,Chen G

    更新日期:2019-03-01 00:00:00

  • Less is more: Silver-AIE core@shell nanoparticles for multimodality cancer imaging and synergistic therapy.

    abstract::Nanomaterials with integrated multiple imaging and therapeutic modalities possess great potentials in accurate cancer diagnostics and enhanced therapeutic efficacy. Traditional strategies for achieving multimodality nanoplatform through one by one combination of different modalities are challenged by the complicated s...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2020.119834

    authors: He X,Peng C,Qiang S,Xiong LH,Zhao Z,Wang Z,Kwok RTK,Lam JWY,Ma N,Tang BZ

    更新日期:2020-04-01 00:00:00

  • Antitumor efficacy following the intracellular and interstitial release of liposomal doxorubicin.

    abstract::pH-triggered lipid-membranes designed from biophysical principles are evaluated in the form of targeted liposomal doxorubicin with the aim to ultimately better control the growth of vascularized tumors. We compare the antitumor efficacy of anti-HER2/neu pH-triggered lipid vesicles encapsulating doxorubicin to the anti...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2012.02.039

    authors: Bandekar A,Karve S,Chang MY,Mu Q,Rotolo J,Sofou S

    更新日期:2012-06-01 00:00:00

  • Isothermal microcalorimetry: an analytical technique for assessing the dynamic chemical stability of UHMWPE.

    abstract::In this work, isothermal microcalorimetry (IMC) was utilized to measure the exothermic heat flow from specimens of ultra-high-molecular-weight polyethylene (UHMWPE), that had been sterilized by various standard methods, under simulated shelf storage (air at 25 degrees C, 30% r.h.) and simulated implantation (phosphate...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(02)00317-4

    authors: Charlebois SJ,Daniels AU,Lewis G

    更新日期:2003-01-01 00:00:00

  • Adhesion contact dynamics of primary hepatocytes on poly(ethylene terephthalate) surface.

    abstract::The design of bioartificial liver assist device requires an effective attachment of primary hepatocytes on polymeric biomaterials. A better understanding of this cell-surface interaction would aid the optimal choice of biomaterials. In this study, the adhesion contact dynamics of primary hepatocytes on poly(ethylene t...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2004.03.041

    authors: Tan WJ,Teo GP,Liao K,Leong KW,Mao HQ,Chan V

    更新日期:2005-03-01 00:00:00

  • A model for simultaneous crystallisation and biodegradation of biodegradable polymers.

    abstract::This paper completes the model of biodegradation for biodegradable polymers that was previously developed by Wang et al. (Wang Y, Pan J, Han X, Sinka, Ding L. A phenomenological model for the degradation of biodegradable polymers. Biomaterials 2008;29:3393-401). Crystallisation during biodegradation was not considered...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.10.001

    authors: Han X,Pan J

    更新日期:2009-01-01 00:00:00

  • BMP10 as a potent inducer of trophoblast differentiation in human embryonic and induced pluripotent stem cells.

    abstract::Bone morphogenetic proteins (BMPs) are known to induce diverse differentiation fates in human embryonic stem cells (hESCs). In the present study, we compared the potency at which BMP5, BMP10 and BMP13, which are members of distinct BMP subgroups due to differences in sequential and structural homology, induce differen...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.08.084

    authors: Lichtner B,Knaus P,Lehrach H,Adjaye J

    更新日期:2013-12-01 00:00:00

  • Excess polycation mediates efficient chitosan-based gene transfer by promoting lysosomal release of the polyplexes.

    abstract::The optimal ratio of the polycation's amine to DNA phosphate group (N:P) for efficient polymer-based transfection always employs excess polycation versus DNA. Most of the excess polycation remains free in solution, unassociated with the polyplexes, but is essential for efficient transfection. The mechanism by which ex...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2011.03.010

    authors: Thibault M,Astolfi M,Tran-Khanh N,Lavertu M,Darras V,Merzouki A,Buschmann MD

    更新日期:2011-07-01 00:00:00

  • Skin organ culture model to test the toxicity of polyoxyethylene networks.

    abstract::Films of polyoxyethylene network were prepared from two types of triethoxysilane-terminated prepolymers. In this way, films of polyoxyethylene network with possible applications in the biomedical field could be made easier. To test their biocompatibility, these networks were added to organ cultures of adult human skin...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(92)90155-h

    authors: Beele H,Thierens H,Deveux R,Goethals E,de Ridder L

    更新日期:1992-01-01 00:00:00

  • Assembly of upconversion nanophotosensitizer in vivo to achieve scatheless real-time imaging and selective photodynamic therapy.

    abstract::A perfect "off" to "on" switch of the therapeutic function is very important to minimize the phototoxicity of nanoplatforms assisted imaging-guided photodynamic therapy (PDT) of cancer. Current approaches rely on preloaded photosensitizers, where the off/on state of PDT is regulated by the sensitizing light of photose...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2019.02.015

    authors: Feng Y,Wu Y,Zuo J,Tu L,Que I,Chang Y,Cruz LJ,Chan A,Zhang H

    更新日期:2019-05-01 00:00:00

  • Modulation of Wnt/β-catenin signaling in human embryonic stem cells using a 3-D microwell array.

    abstract::Intercellular interactions in the cell microenvironment play a critical role in determining cell fate, but the effects of these interactions on pathways governing human embryonic stem cell (hESC) behavior have not been fully elucidated. We and others have previously reported that 3-D culture of hESCs affects cell fate...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2011.11.070

    authors: Azarin SM,Lian X,Larson EA,Popelka HM,de Pablo JJ,Palecek SP

    更新日期:2012-03-01 00:00:00

  • Influence of grinding, sandblasting, polishing and heat treatment on the flexural strength of a glass-infiltrated alumina-reinforced dental ceramic.

    abstract::The influence of processing-introduced flaws and heat treatment on the strength degradation of the dental core material has recently been observed. However, there are insufficient studies which investigate the role of grinding, grinding orientation, sandblasting, polishing and heat treatment on the strength of In-Cera...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2003.08.056

    authors: Guazzato M,Albakry M,Quach L,Swain MV

    更新日期:2004-05-01 00:00:00