Abstract:
:An anterior bending posture of the trunk during walking is often seen among the elderly commonly due to weakened thoraco-lumbar and gluteal muscles. For the management of this debilitating condition, the authors have developed a modified design of thoraco-lumbosacral orthosis (TLSO). Incorporated in this device are pockets for the accommodation of lead weights, which are located posteriorly at the level of the lumbar region and an elasticated anterior abdominal band. The results and level of patient acceptance achieved with the use of this brace have both been excellent.
journal_name
Prosthet Orthot Intjournal_title
Prosthetics and orthotics internationalauthors
Watanabe H,Kutsuna T,Asami T,Inoue Edoi
10.3109/03093649509078233subject
Has Abstractpub_date
1995-04-01 00:00:00pages
56-8issue
1eissn
0309-3646issn
1746-1553journal_volume
19pub_type
杂志文章abstract:BACKGROUND:Custom-contoured wheelchair seating lowers risk of pressure injury and postural deterioration while custom-contoured wheelchair seating lowers risk of pressure injury and postural deterioration while increasing the stability and functional activity of the wheelchair occupant. Producing custom-contoured seati...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章,评审
doi:10.1177/0309364619836028
更新日期:2019-08-01 00:00:00
abstract::Prefabricated ICEROSS (Icelandic Roll On Silicone Socket) sockets have been in use in Iceland since early 1986. Use of custom-made silicone sockets began several years earlier, and a paper devoted to the subject was presented at the 1984 AOPA Assembly by the author of this article. The ICEROSS system is primarily used...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093649309164354
更新日期:1993-04-01 00:00:00
abstract::This contribution presents the case histories of two patients who underwent limb amputation. One patient suffered from psoriasis prior to the surgery and the second developed psoriatic lesions post surgery. Both patients were provided with a prosthesis and despite the multiple cutaneous complications of the psoriasis ...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093640309167979
更新日期:2003-04-01 00:00:00
abstract::At the request of a polio survivor, a partially flexible thigh cuff made of leather and canvas for a carbon KAFO was devised to allow the wearer to feel more comfortable while sitting on a toilet seat. The original, acrylic resin, thigh cuff was partially excised to make an opening (15x10 cm), which was stuffed with r...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1080/03093640600863844
更新日期:2007-06-01 00:00:00
abstract::A mathematical model was used to investigate the dynamic behaviour of an above-knee (AK) prosthesis in the swing phase and to analyse the influence of mass and mass distribution on the maximal stump load and the required energy. The model consists of a bondgraph model of the prosthesis and a "walking" model which pred...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093648709078180
更新日期:1987-08-01 00:00:00
abstract:BACKGROUND:The incidence and etiology of prosthetic services utilization is poorly understood during the first 90 days post-delivery of the initial lower limb prosthesis. This period is of critical importance, as prevailing policy dictates limits on the reimbursement for certain services provided during this time perio...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364618774053
更新日期:2018-10-01 00:00:00
abstract:BACKGROUND:Until recently, no study had compared the quality of life of persons with transfemoral amputation treated with osseointegration to socket prosthesis users. OBJECTIVES:Comparison of quality of life in two types of prostheses users: a cohort of patients with osseointegration and patients equipped with a socke...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364620948649
更新日期:2020-08-25 00:00:00
abstract::A CAD (computer aided design) analysis software package (CADVIEW) was designed for use with prosthetic and orthotic CAD CAM (computer aided design/computer aided manufacture) systems. Using the Microsoft Windows 3.1 environment, CADVIEW provides a series of anatomical shape viewing and analysis tools. These tools incl...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093649409164393
更新日期:1994-08-01 00:00:00
abstract::A keen skier who is a trans-tibial and trans-radial quadrilateral amputee sought an improved adaptation for skiing from the Rehabilitation Engineering Service in Edinburgh. The unpredictable nature of the bending moments and loads that can be imposed on the prostheses during skiing raised concern about the suitability...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093640409167927
更新日期:2004-04-01 00:00:00
abstract::The casting of flexible polyurethane foam into a wide range of customised shapes has been found to offer a relatively straightforward solution to a number of problems associated with providing support for the physically handicapped. This note describes the techniques used for the production of such supports and report...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093648409145359
更新日期:1984-08-01 00:00:00
abstract:BACKGROUND::Ambulation with a prosthesis is the ultimate goal of rehabilitation for a person with a major lower limb amputation. Due to challenges with prosthetic service delivery in rural settings, many patients with amputations are not benefitting from prosthetic interventions. Inaccessibility to prosthetic services ...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364618792730
更新日期:2019-04-01 00:00:00
abstract::This study was performed to investigate the efficacy of prosthetic rehabilitation in children with congenital malformations, also to determine whether there were any factors related to family history and pregnancy which could have affected the formation of such deficiencies. Twenty-five (25) limb deficient children we...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093649909071624
更新日期:1999-08-01 00:00:00
abstract::Falling represents a health risk for lower limb amputees fitted with an osseointegrated fixation mainly because of the potential damage to the fixation. The purpose of this study was to characterize a real forward fall that occurred inadvertently to a transfemoral amputee fitted with an osseointegrated fixation while ...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093640903585024
更新日期:2010-03-01 00:00:00
abstract::A simple alignment apparatus and the method of transferring the offset test load to the prosthetic assembly through an aligned mandrel for the principal structural tests in accordance with ISO 10328 is presented. The new alignment apparatus was used to prepare test specimens consisting of traditional laminated prosthe...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1080/03093640008726554
更新日期:2000-12-01 00:00:00
abstract:BACKGROUND:Diabetes mellitus is a leading cause of major lower extremity amputation. OBJECTIVE:To examine the influence of gender, level of amputation and diabetes mellitus status on being fit with a prosthetic limb following lower extremity amputation for peripheral arterial disease. STUDY DESIGN:Retrospective analy...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364616628341
更新日期:2017-02-01 00:00:00
abstract::Telehealth has the potential to be a valuable tool for technical and clinical support of computer controlled prosthetic devices. This pilot study examined the use of Internet-based, desktop video conferencing for remote configuration of the Otto Bock C-Leg. Laboratory tests involved connecting two computers running Mi...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1080/03093640208726638
更新日期:2002-08-01 00:00:00
abstract::Initial analyses from a survey of people with unilateral upper limb congenital absence registered with the Cambridge Disablement Services Centre (DSC) indicated differences related to laterality and gender. A postal survey of all DSCs in the UK was conducted and support for these findings was provided from the analysi...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093649809164487
更新日期:1998-12-01 00:00:00
abstract::This study investigated the validity of post-amputation application of removable rigid dressings (RRDs) for trans-tibial amputees, regarding preparation for prosthetic management and key rehabilitation timelines. It was hypothesised that the use of RRDs would result in faster preparation of the residual limb for prost...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1080/03093640802016795
更新日期:2008-06-01 00:00:00
abstract::A study has been performed to investigate the physical effects of lumbar spinal supports. Two groups were studied, a group of normal male subjects and a group of male low back pain patients. Five different spinal supports were investigated and their effects upon the skin temperature, spinal movements and intra-abdomin...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093648209166772
更新日期:1982-08-01 00:00:00
abstract:BACKGROUND:Many individuals with cerebral palsy wear ankle foot orthoses during daily life. Orthoses influence joint motion, but how they impact muscle remains unclear. In particular, the gastrocnemius is commonly stiff in cerebral palsy. Understanding whether orthoses stretch or shorten this muscle during daily life m...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364616665731
更新日期:2017-06-01 00:00:00
abstract::Wheelchair prescription is complex with thousands of choices and options. Theoretically, a higher quality or innovative wheelchair that is appropriately matched to the user and their unique needs will increase participation. It is well accepted that there is an alarmingly high incidence of carpal tunnel syndrome, and ...
journal_title:Prosthetics and orthotics international
pub_type: 历史文章,杂志文章
doi:10.1080/03093640903082126
更新日期:2009-09-01 00:00:00
abstract::In the inaugural edition of Prosthetics and Orthotics International in 1977, Dr Sidney Fishman identified the Psychological Sciences as one of six indispensable areas of skill and knowledge in professional prosthetic-orthotic practice. Since then, there have been substantial changes and developments in the complexity ...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364620967780
更新日期:2020-12-01 00:00:00
abstract:BACKGROUND:A non-articulated plantarflexion resist ankle foot orthosis (AFO), commonly known as a posterior leaf spring AFO, is indicated for patients with motor impairment to the dorsiflexors. The AFO is often custom molded to a patient's lower limb anatomy and fabricated from polypropylene. There are no established g...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364610394477
更新日期:2011-03-01 00:00:00
abstract::Fifty-nine amputees, 24 below-knee (BK), 17 through-knee (TK) and 18 above-knee (AK) who had prosthetic replacements, were evaluated using a questionnaire which provided a quantitative and qualitative assessment scale for the prosthetic function. The ability to apply or don the prosthesis was noted in 100% of the BK, ...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093649209164336
更新日期:1992-12-01 00:00:00
abstract:BACKGROUND:Patients suffering from medial compartment knee osteoarthritis (OA) may be treated with unloader knee orthoses or laterally wedged insoles. OBJECTIVES:The aim of this study was to identify and compare the effects of them on the gait parameters and pain in these patients. STUDY DESIGN:Quasi-experimental. M...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章,随机对照试验
doi:10.1177/0309364612447094
更新日期:2013-02-01 00:00:00
abstract::Silicone rubbers and casting tapes individually have previously been used in the manufacture of sockets (Swanson, 1972; Sweitzer, 1973; Ruder, 1977; Graves, 1980; Aqualite, 1982). The authors believe that the present combination of these materials to manufacture a directly moulded socket with a complete silicone rubbe...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093648509164717
更新日期:1985-08-01 00:00:00
abstract:BACKGROUND:Relatively little is known about spine during gait compared to movement analysis of the lower extremities. The trunk is often regarded and analysed as a single rigid segment and there is a paucity of information on inter-segmental movement within the spine and its relationship to pelvis and lower limbs. OBJ...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364615579319
更新日期:2016-10-01 00:00:00
abstract:BACKGROUND:Reduced-stiffness components are often prescribed in lower-limb prostheses, but their efficacy in augmenting shock absorption has been inconclusive. OBJECTIVES:To perform a systematic variation of longitudinal prosthetic stiffness over a wide range of values and to evaluate its effect on shock absorption du...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.1177/0309364616640945
更新日期:2017-04-01 00:00:00
abstract::A cheap and fast method of providing long term accommodating insoles is described. Room temperature vulcanizing (RTV) silicone rubber is used, with suitable coverings, to provide pain relief and support for feet and ankles. The combination of physical properties of the finished item provides a useful balance between s...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093648409145347
更新日期:1984-04-01 00:00:00
abstract::This paper discusses the place of rotational moulding in the provision of prosthetic shanks and shank sections. It covers the selection of thermoplastic material, the moulding conditions and their automation in a machine process, and the development of a suitable range of moulds. Also covered is the question of interf...
journal_title:Prosthetics and orthotics international
pub_type: 杂志文章
doi:10.3109/03093648509164822
更新日期:1985-04-01 00:00:00