Total surface bearing self suspending above-knee sockets.

abstract：:The aim of the present study was to compare sockets for below-knee (BK) prostheses made by Computer Aided Design-Computer Aided Manufacture (CAD-CAM) to those made by hand. The patients in the study were provided with two prostheses each, which apart from the sockets, were identical. One socket was made by the CAD-CAM...

journal_title：Prosthetics and orthotics international

authors： Köhler P,Lindh L,Netz P

更新日期：1989-04-01 00:00:00

abstract：:Telehealth has the potential to be a valuable tool for technical and clinical support of computer controlled prosthetic devices. This pilot study examined the use of Internet-based, desktop video conferencing for remote configuration of the Otto Bock C-Leg. Laboratory tests involved connecting two computers running Mi...

journal_title：Prosthetics and orthotics international

authors： Lemaire ED,Fawcett JA

更新日期：2002-08-01 00:00:00

abstract：:A polio victim who has been in a negative pressure ventilator ("iron lung") since 1950 was in need of an activated mattress to combat the hallucinatory effects of complete immobilization and to assist with body pressure distribution. A mechanical method was used to give the patient's mattress a moving wave form of ver...

journal_title：Prosthetics and orthotics international

authors： Brearley MN,Motloch WM

更新日期：1978-08-01 00:00:00

abstract：:The objective of this study was to develop guidelines for the prescription of ankle-foot, knee, wrist-hand and elbow orthoses for patients with neurological disorders. The study is part of a more comprehensive study focusing on the development of clinical guidelines for the prescription of these orthoses in a wider pa...

journal_title：Prosthetics and orthotics international

authors： Hijmans JM,Geertzen JH

更新日期：2006-04-01 00:00:00

abstract：:Long-term results over a period of more than 10 years give evidence of the superiority of the through-knee compared to the above-knee stump. However, failures in through-knee stumps before, during and after operation and pitfalls in prosthetic fitting are still too frequent. They are mostly due to errors because the p...

journal_title：Prosthetics and orthotics international

authors： Baumgartner R

更新日期：1983-08-01 00:00:00

abstract：BACKGROUND:Based on the literature, patients with carpal tunnel syndrome are suggested to wear a custom-made wrist orthosis immobilizing the wrist in a neutral position. Many prefabricated orthoses are available on the market, but the majority of those do not assure neutral wrist position. OBJECTIVES:We hypothesized t...

journal_title：Prosthetics and orthotics international

authors： Mlakar M,Ramstrand N,Burger H,Vidmar G

更新日期：2014-06-01 00:00:00

abstract：:This study investigated the validity of post-amputation application of removable rigid dressings (RRDs) for trans-tibial amputees, regarding preparation for prosthetic management and key rehabilitation timelines. It was hypothesised that the use of RRDs would result in faster preparation of the residual limb for prost...

journal_title：Prosthetics and orthotics international

authors： Taylor L,Cavenett S,Stepien JM,Crotty M

更新日期：2008-06-01 00:00:00

abstract：BACKGROUND:Individuals with transtibial amputation are at increase risk of falling. The absence of an ankle joint and the associated musculature in these individuals can reduce clearance between the prosthetic foot and ground during the swing phase of gait, which may increase the risk of stumbling and in turn falling. ...

journal_title：Prosthetics and orthotics international

authors： Rosenblatt NJ,Bauer A,Grabiner MD

更新日期：2017-08-01 00:00:00

abstract：BACKGROUND:After amputation, the brain is known to be reorganized especially in the primary motor cortex. We report a case to show changes in the corticospinal tract in a patient with serial bilateral transtibial amputations using diffusion tensor imaging. Case Description and Methods: A 78-year-old man had a transtibi...

journal_title：Prosthetics and orthotics international

authors： Lee SY,Kang SH,Kim DK,Seo KM,Ro HJ,Kim JK

更新日期：2017-10-01 00:00:00

abstract：:Clinically applied multichannel stimulation was visualized in the very beginnings of FES. A short survey of existing multichannel systems was taken and compared to initial expectations. While much still remains to be done to get multichannel stimulation out of the research environment and into the clinical routine, th...

journal_title：Prosthetics and orthotics international

authors： Vodovnik L,Grobelnik S

更新日期：1977-04-01 00:00:00

abstract：:The concept of measuring pressure at the interface between the stump and the prosthetic socket could provide valuable information in the process of prosthetic socket fabrication, modification, and fit. Two systems, the Rincoe Socket Fitting System (SFS) and Tekscan's F-Socket Pressure Measurement System, have been com...

journal_title：Prosthetics and orthotics international

authors： Polliack AA,Sieh RC,Craig DD,Landsberger S,McNeil DR,Ayyappa E

更新日期：2000-04-01 00:00:00

abstract：:We present a case report of a patient, affected by post-polio syndrome and cuff tear arthropathy of his right shoulder, who underwent reverse shoulder arthroplasty. A previous radial deficiency was unmasked in the post-operative follow-up, with passive elbow bending when the forearm was put in an antigravitational pos...

journal_title：Prosthetics and orthotics international

authors： Castoldi F,Lollino N,Caranzano F,Assom M

更新日期：2009-06-01 00:00:00

abstract：:The authors report on a new device for the primary mobilization of a boy with severe deficiencies of all four limbs. This device allows independent mobility. ...

journal_title：Prosthetics and orthotics international

authors： Balogh S,Gönczy T,Bujdosó R,Kullmann L

更新日期：1994-04-01 00:00:00

abstract：BACKGROUND:Good suspension lessens the pistoning (vertical displacement) of the residual limb inside the prosthetic socket. Several methods are used for measuring the pistoning. STUDY DESIGN:Clinical trial. OBJECTIVES:To introduce and evaluate a new simple method for measuring the pistoning between the soft liner and...

journal_title：Prosthetics and orthotics international

authors： Gholizadeh H,Abu Osman NA,Lúvíksdóttir Á,Eshraghi A,Kamyab M,Wan Abas WA

更新日期：2011-12-01 00:00:00

abstract：:The Mobile Arm Support, conceived and researched by Dr. Radulovic, is intended for the use of patients whose arm is afflicted. The support consists of a supporting harness, an articulated splint on which the arm is fixed and a pneumatic system of elevation that counterbalances the weight of the arm. Its originality li...

journal_title：Prosthetics and orthotics international

authors： Radulovic R,Piera JB,Cassagne B,Grossiord A,Boruchowitsch G

更新日期：1980-08-01 00:00:00

abstract：BACKGROUND::Orthotic treatment for adolescent idiopathic scoliosis is a mainstay in nonoperative treatment to prevent progressive spinal deformity. OBJECTIVE::To determine the effectiveness of the Providence orthosis in the treatment of adolescent idiopathic scoliosis. STUDY DESIGN::Retrospective review. METHODS::Pa...

journal_title：Prosthetics and orthotics international

authors： Davis L,Murphy JS,Shaw KA,Cash K,Devito DP,Schmitz ML

更新日期：2019-04-01 00:00:00

abstract：:Orthoses which fit inside shoes have, in many cases in the past, been fashioned to the shape of the patient's foot. It is suggested that improved stability and comfort is achieved if, instead, the outside shape of the foot-piece of the orthosis is fashioned to the inside shape of the footwear. A method for achieving t...

journal_title：Prosthetics and orthotics international

authors： Platts RG,Field A,Knight S

更新日期：1979-08-01 00:00:00

abstract：:Terminal overgrowth in transverse deficiencies and in amputations, particularly of the humerus and tibia necessitate serial trimming procedures or re-amputation. Capping using an autogenous bone graft or a titanium and polyethylene endoprosthetic cap provides a satisfactory way of avoiding these re-amputations and all...

journal_title：Prosthetics and orthotics international

authors： Pfeil J,Marquardt E,Holtz T,Niethard FU,Schneider E,Carstens C

更新日期：1991-08-01 00:00:00

abstract：:Pushchairs for adults are used by two distinct groups: the high dependency users who cannot walk or use a self-propelling chair and the occasional users who may be able to walk indoors but are unable to walk significant distances outdoors. In the past, both disparate groups were provided with similar wheelchairs descr...

journal_title：Prosthetics and orthotics international

authors： van Ross E

更新日期：1991-04-01 00:00:00

abstract：BACKGROUND:High-quality clinical practice guidelines are necessary for effective use of resources both at an individual patient- and national-level. Nordic clinical practice guidelines recommendations for orthotic treatment of knee osteoarthritis vary and little is known about their quality. OBJECTIVES:The aim of the ...

journal_title：Prosthetics and orthotics international

authors： Jarl G,Hellstrand Tang U,Nordén E,Johannesson A,Rusaw DF

更新日期：2019-10-01 00:00:00

abstract：BACKGROUND:Mobility clinics are designed to extend gait and mobility training beyond rehabilitation programmes. No research has been undertaken into participants' experiences of attending these multidisciplinary, experience-based clinics. Research in this area is needed to ensure clinics meet intended goals, including ...

journal_title：Prosthetics and orthotics international

authors： Anderson S,Chaffey L,Dillon M

更新日期：2019-12-01 00:00:00

abstract：BACKGROUND:Little evidence exists for the orthotic management for individuals diagnosed with diabetic neuropathy and partial foot amputation. OBJECTIVE:This pilot study examined differences in balance and pressure distribution while individuals wore foot orthoses inside shoes (BA) and this same orthosis combined with ...

journal_title：Prosthetics and orthotics international

authors： Spaulding SE,Chen T,Chou LS

更新日期：2012-06-01 00:00:00

abstract：:Modern sockets for lower limb amputees utilize total contact and distribute some weight on the stump end. Its tolerance to bear weight varies but is better after joint disarticulation, however, systematic measures have been missing. Different levels, indications, shapes etc. were analysed with 102 measurements in 69 p...

journal_title：Prosthetics and orthotics international

authors： Persson BM,Liedberg E

更新日期：1982-12-01 00:00:00

abstract：BACKGROUND AND AIM:In recent years, there has been an increased interest in recording high-quality electromyographic signals from within the sockets of lower-limb amputees. However, successful recording presents major challenges to both researchers and clinicians. This article details and compares four prototypical int...

journal_title：Prosthetics and orthotics international

authors： Hefferman GM,Zhang F,Nunnery MJ,Huang H

更新日期：2015-04-01 00:00:00

abstract：BACKGROUND:Challenges exist with the provision of appropriate mobility assistive devices in rural areas. The use of the direct manufacturing prosthetic socket system is a possible solution to these challenges. OBJECTIVES:The objective of this study was to test and explore the clients' perspectives with the application...

journal_title：Prosthetics and orthotics international

authors： Ennion L,Johannesson A,Rhoda A

更新日期：2017-10-01 00:00:00

abstract：:The purpose of this study was to investigate the effects of a 4 week physiotherapy programme on patients who were given a spinal orthosis for neuromuscular scoliosis. This study was planned as a single group pre- and post-intervention repeated measures design. All patients were given a polyethylene spinal orthosis wit...

journal_title：Prosthetics and orthotics international

authors： Bayar B,Uygur F,Bayar K,Bek N,Yakut Y

更新日期：2004-12-01 00:00:00

abstract：:The purpose of this study was to determine the effect of varying prosthetic shank mass, while maintaining the mass centre location and moment of inertia, on the swing phase kinematics, kinetics and hip muscular effort of free speed above-knee (AK) amputee gait. Six AK amputees, wearing similar prosthetic designs, had ...

journal_title：Prosthetics and orthotics international

authors： Hale SA

更新日期：1990-12-01 00:00:00

abstract：:A CAD (computer aided design) analysis software package (CADVIEW) was designed for use with prosthetic and orthotic CAD CAM (computer aided design/computer aided manufacture) systems. Using the Microsoft Windows 3.1 environment, CADVIEW provides a series of anatomical shape viewing and analysis tools. These tools incl...

journal_title：Prosthetics and orthotics international

authors： Lemaire E

更新日期：1994-08-01 00:00:00

abstract：:In a prospective, controlled study, 186 prosthetic rubber feet of different designs were fitted to amputees with trans-tibial prostheses. There were 158 amputees available for follow-up. The amputee compliance was good and 89% were satisfied with their device. After 18 months of use one VI-Solid rubber foot from VVAF ...

journal_title：Prosthetics and orthotics international

authors： Steen Jensen J,Nilsen R,Zeffer J,Fisk J,Hartz C

更新日期：2006-08-01 00:00:00

abstract：BACKGROUND:Step counts, obtained via activity monitors, provide insight into activity level in the free-living environment. Accuracy assessments of activity monitors are limited among individuals with lower-limb amputations. OBJECTIVES:(1) To evaluate the step count accuracy of both monitors during forward-linear and ...

journal_title：Prosthetics and orthotics international

authors： Arch ES,Sions JM,Horne J,Bodt BA

更新日期：2018-10-01 00:00:00