Incorporating platelet-rich plasma into coaxial electrospun nanofibers for bone tissue engineering.

Abstract:

:Platelet-rich plasma (PRP) is used in therapy for bone tissue repair because an abundance of osteogenesis-related growth factors can be released from the concentrated platelets. However, its clinical use is limited because growth factors, temporally released from PRP, are degraded rapidly. This study aimed to incorporate PRP-derived growth factors into SF/PCL/PVA nanofibers by coaxial electrospinning to determine the release profiles of growth factors and how the presence of these growth factors enhances the osteogenic abilities of the nanofibers. Scaffolds containing different ratios of PRP and PVA were prepared and characterized. We then quantified the release of growth factors from the nanofibers over time, and evaluated the proliferation, migration and osteogenic differentiation of MSCs. The in vivo osteogenic capacity of the PRP-containing core-shell NFS was also evaluated by transplanting the PRP/MSCs/CS/β-TCP compounds into the skin on the back of nude mice and by treating cranial defects of C57BL/6 mice. The results of such treatments were analyzed by immunofluorescent staining, μ computed tomography (μCT), and histological observation. The results show that coaxial nanofibers with a PRP-5% PVA solution ratio of 7:1 contained a relatively high amount of PRP and exhibited a more uniform distribution of fiber diameters. The bioactivity of the scaffolds was enhanced due to the increased proliferation and migration of bone marrow mesenchymal stem cells (BMSCs). When the cells were inoculated and cultured on the PRP-loaded nanofibrous mats, the expression of collagen type II also increased. Furthermore, new bone formation was also promoted by PRP-NFS after 8 weeks of implantation. In conclusion, this study shows that the incorporation of PRP had positive effects on the bioactivity and osteogenic ability of coaxial nanofibrous mats. Such nanofibrous mats may prove beneficial in various applications of bone tissue engineering.

journal_name

Int J Pharm

authors

Cheng G,Ma X,Li J,Cheng Y,Cao Y,Wang Z,Shi X,Du Y,Deng H,Li Z

doi

10.1016/j.ijpharm.2018.06.020

subject

Has Abstract

pub_date

2018-08-25 00:00:00

pages

656-666

issue

1-2

eissn

0378-5173

issn

1873-3476

pii

S0378-5173(18)30418-6

journal_volume

547

pub_type

杂志文章
  • Design of PEI-conjugated bio-reducible polymer for efficient gene delivery.

    abstract::The poly(cystaminebis(acrylamide)-diaminohexane) (poly(CBA-DAH)) was designed previously as a bio-reducible efficient gene delivery carrier. However, the high weight ratio required to form the polyplexes between poly(CBA-DAH) with pDNA is still a problem that needs to be addressed. To solve this problem and increase t...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2018.04.051

    authors: Nam JP,Kim S,Kim SW

    更新日期:2018-07-10 00:00:00

  • 3D printed medicines: A new branch of digital healthcare.

    abstract::Three-dimensional printing (3DP) is a highly disruptive technology with the potential to change the way pharmaceuticals are designed, prescribed and produced. Owing to its low cost, diversity, portability and simplicity, fused deposition modeling (FDM) is well suited to a multitude of pharmaceutical applications in di...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2018.07.024

    authors: Awad A,Trenfield SJ,Gaisford S,Basit AW

    更新日期:2018-09-05 00:00:00

  • Influence of dry granulation on compactibility and capping tendency of macrolide antibiotic formulation.

    abstract::The effect of dry granulation (roller compaction and slugging) on compactibility and tablet capping tendency in a formulation with macrolide antibiotic and microcrystalline cellulose (MCC) was investigated. Direct tableting of this formulation revealed a pronounced capping tendency. Both dry granulated systems exhibit...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.01.023

    authors: Bozic DZ,Dreu R,Vrecer F

    更新日期:2008-06-05 00:00:00

  • Combination strategies for enhancing transdermal absorption of sumatriptan through skin.

    abstract::The aim of the present work was to characterize in vitro sumatriptan transdermal absorption through human skin and to investigate the effect of chemical enhancers and iontophoresis applied both individually and in combination. A secondary objective was to compare the results obtained with those in porcine skin under t...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2006.05.049

    authors: Femenía-Font A,Balaguer-Fernández C,Merino V,López-Castellano A

    更新日期:2006-10-12 00:00:00

  • Development and evaluation of PLA-coated co-micellar nanosystem of Resveratrol for the intra-articular treatment of arthritis.

    abstract::Arthritis is a chronic degenerative joint disease decreasing the patient's quality of life. Mixed micellar system (MM) was exploited as a nanotechnology platform suitable for the encapsulation of the water-insoluble drug, Resveratrol (RES). MM were prepared using different ratios of poloxamer 188 (P188) and poloxamer ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2019.118560

    authors: Kamel R,Abbas H,Shaffie NM

    更新日期:2019-10-05 00:00:00

  • Decoding the small size challenges of mini-tablets for enhanced dose flexibility and micro-dosing.

    abstract::Mini-tablets are an age appropriate dosage form for oral administration to pediatric and geriatric patients, either as individual mini-tablets or as composite dosage units. Smaller size mini-tablets than the commonly used 2 mm or larger size would offer more tailored micro-dose delivery of investigational drugs. This ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2019.118905

    authors: Mitra B,Thool P,Meruva S,Aycinena JA,Li J,Patel J,Patel K,Agarwal A,Karki S,Bowen W

    更新日期:2020-01-25 00:00:00

  • The place of dosage form innovation and the OTC market: the price to pay.

    abstract:AIMS AND OBJECTIVES:The aims and objectives of this article are to provide a background to the innovations that are made in over the counter market and to outline the time and costs involved in these activities. ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.02.042

    authors: Goggin PL

    更新日期:2014-08-05 00:00:00

  • Sponges carrying self-microemulsifying drug delivery systems.

    abstract::Self-microemulsifying drug delivery systems (SMEDDS) increase the solubility of lipophilic drugs. One barrier to their wide application is their liquid nature. We report on a new method to solidify SMEDDS-their incorporation in sponges made from a hydrophilic natural polymer. Using different freeze-drying schemes, spo...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2013.09.024

    authors: Josef E,Bianco-Peled H

    更新日期:2013-12-15 00:00:00

  • Characterization and aerodynamic evaluation of spray dried recombinant human growth hormone using protein stabilizing agents.

    abstract::The effect of the protein stabilizers on the stability and aerosol performance of spray dried recombinant human growth hormone (SD rhGH) was investigated. rhGH solution was spray dried alone, with polysorbate 20 (at three concentrations of 0.05%, 0.01%, and 0.005%), Zn(2+) (by Zn(2+):rhGH molar ratio of 2:1 and 4:1), ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.10.053

    authors: Jalalipour M,Gilani K,Tajerzadeh H,Najafabadi AR,Barghi M

    更新日期:2008-03-20 00:00:00

  • Development and characterisation of sustained release solid dispersion oral tablets containing the poorly water soluble drug disulfiram.

    abstract::Administration of drugs via the oral route is the most common and preferred route due to its ease of administration, cost-effectiveness and flexibility in design. However, if the drug being administered has limited aqueous solubility it can result in poor bioavailability. Furthermore, the low pH of the stomach as well...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.11.029

    authors: Shergill M,Patel M,Khan S,Bashir A,McConville C

    更新日期:2016-01-30 00:00:00

  • Influence of in vitro release methods on assessment of tobramycin ophthalmic ointments.

    abstract::The current investigation was carried out to identify appropriate parameters for measuring the in vitro release of tobramycin (TOB) ophthalmic ointments and to evaluate the feasibility of in vitro release testing methods to assess the product performance. Drug release was assessed using USP dissolution apparatus IV an...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119938

    authors: Patere S,Newman B,Wang Y,Choi S,Mekjaruskul C,Jay M,Lu X

    更新日期:2020-11-30 00:00:00

  • Deoxycholate-hydrogels: novel drug carrier systems for topical use.

    abstract::Na-deoxycholate (Na-DOC) forms a viscous thixotropic gel when in contact with excess buffer systems. The resulting gels have been tested as novel drug carrier systems for topical use. The influence of differing amounts of mannitol, glycerol and xylitol on the viscous modulus (G"/Pa) was evaluated by oscillatory measur...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00170-2

    authors: Valenta C,Nowack E,Bernkop-Schnürch A

    更新日期:1999-08-05 00:00:00

  • Preparation and characterization of PEG-coated silica nanoparticles for oral insulin delivery.

    abstract::The present study reports the production and characterization of PEG-coated silica nanoparticles (SiNP-PEG) containing insulin for oral administration. High (PEG 20,000) and low (PEG 6000) PEG molecular weights were used in the preparations. SiNP were produced by sol-gel technology followed by PEG adsorption and chara...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.07.049

    authors: Andreani T,de Souza AL,Kiill CP,Lorenzón EN,Fangueiro JF,Calpena AC,Chaud MV,Garcia ML,Gremião MP,Silva AM,Souto EB

    更新日期:2014-10-01 00:00:00

  • Preparation of olanzapine and methyl-β-cyclodextrin complexes using a single-step, organic solvent-free supercritical fluid process: An approach to enhance the solubility and dissolution properties.

    abstract::The purpose of this study was to evaluate a single-step, organic solvent-free supercritical fluid process for the preparation of olanzapine-methyl-β-cyclodextrin complexes with an express goal to enhance the dissolution properties of olanzapine. The complexes were prepared by supercritical carbon dioxide processing, c...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.08.062

    authors: Rudrangi SR,Trivedi V,Mitchell JC,Wicks SR,Alexander BD

    更新日期:2015-10-15 00:00:00

  • Strategies for bringing drug delivery tools into discovery.

    abstract::The past decade has yielded a significant body of literature discussing approaches for development and discovery collaboration in the pharmaceutical industry. As a result, collaborations between discovery groups and development scientists have increased considerably. The productivity of pharma companies to deliver new...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2011.03.024

    authors: Kwong E,Higgins J,Templeton AC

    更新日期:2011-06-30 00:00:00

  • Enhancing the solubility and permeability of the diuretic drug furosemide via multicomponent crystal forms.

    abstract::Furosemide (FSM) is a biopharmaceutical classification system (BCS) class IV drug, being a potent loop diuretic used in the treatment of congestive heart failure and edema. Due to its low solubility and permeability, FSM is known for exhibiting poor oral bioavailability. In order to overcome or even minimize these und...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119694

    authors: Diniz LF,Carvalho PS Jr,Pena SAC,Gonçalves JE,Souza MAC,de Souza Filho JD,Bomfim Filho LFO,Franco CHJ,Diniz R,Fernandes C

    更新日期:2020-09-25 00:00:00

  • Hemocompatibility of poly(ɛ-caprolactone) lipid-core nanocapsules stabilized with polysorbate 80-lecithin and uncoated or coated with chitosan.

    abstract::The hemocompatibility of nanoparticles is of critical importance for their systemic administration as drug delivery systems. Formulations of lipid-core nanocapsules, stabilized with polysorbate 80-lecithin and uncoated or coated with chitosan (LNC and LNC-CS), were prepared and characterized by laser diffraction (D[4,...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2012.01.051

    authors: Bender EA,Adorne MD,Colomé LM,Abdalla DSP,Guterres SS,Pohlmann AR

    更新日期:2012-04-15 00:00:00

  • Controlled release injectable liposomal gel of ibuprofen for epidural analgesia.

    abstract::The epidural administration is used commonly in the treatment of pain. Nonsteroidal anti-inflammatory drugs, especially ibuprofen, would have potential in epidural use. Like many epidurally useful drugs it, however, has a short duration of action, which is a limiting factor. To improve epidural pain treatment, a long-...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(00)00376-8

    authors: Paavola A,Kilpeläinen I,Yliruusi J,Rosenberg P

    更新日期:2000-04-10 00:00:00

  • Quality by Design (QbD) approach to optimize the formulation of a bilayer combination tablet (Telmiduo®) manufactured via high shear wet granulation.

    abstract::A bilayer tablet, which consisted of telmisartan and amlodipine besylate, was formulated based on a Quality by Design (QbD) approach. The control and response factors were determined based on primary knowledge and the target values of the control tablet (Twynsta®). A D-optimal mixture design was used to obtain the opt...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.10.004

    authors: Lee AR,Kwon SY,Choi DH,Park ES

    更新日期:2017-12-20 00:00:00

  • Development and characterisation of novel poly (vinyl alcohol)/poly (vinyl pyrrolidone)-based hydrogel-forming microneedle arrays for enhanced and sustained transdermal delivery of methotrexate.

    abstract::Methotrexate (MTX) is one of the mainstays of treatment for rheumatoid arthritis (RA) and juvenile idiopathic arthritis (JIA) and it is mainly administered either orally or by subcutaneous (SC) injection, which are not so satisfactory. While orally administered MTX is associated with variable bioavailability and cause...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119580

    authors: Tekko IA,Chen G,Domínguez-Robles J,Thakur RRS,Hamdan IMN,Vora L,Larrañeta E,McElnay JC,McCarthy HO,Rooney M,Donnelly RF

    更新日期:2020-08-30 00:00:00

  • Surface modification of poly(lactic acid) nanoparticles by covalent attachment of thiol groups by means of three methods.

    abstract::The aim of the present work was to find a suitable method for the introduction of thiol functions on the surface of poly(DL-lactic acid) (PLA) nanoparticles. Three different approaches were investigated. The modification of the surface involves the activation of PLA carboxylic acid groups followed by the attack of a n...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(02)00542-2

    authors: Nobs L,Buchegger F,Gurny R,Allémann E

    更新日期:2003-01-16 00:00:00

  • Preparation and evaluation of identifiable quick response (QR)-coded orodispersible films using 3D printer with directly feeding nozzle.

    abstract::3D-printing technology is growing in importance due to increased availability and a wider range of applications. Here, we prepared and evaluated a hot melt pneumatic (HMP) 3D-printed QR (Quick Response)-coded orodispersible film (QRODF) containing a poorly water-soluble aripiprazole (ARP). Moreover, QRODF was formulat...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119405

    authors: Oh BC,Jin G,Park C,Park JB,Lee BJ

    更新日期:2020-06-30 00:00:00

  • A novel image analysis methodology for online monitoring of nucleation and crystal growth during solid state phase transformations.

    abstract::This study focuses on the development of an automated image analysis method to extract information on nucleation and crystal growth from polarized light micrographs. Using the developed image analysis method, four parameters related to nucleation and crystal growth could be extracted from the images. These parameters ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2012.04.074

    authors: Wu JX,Xia D,van den Berg F,Amigo JM,Rades T,Yang M,Rantanen J

    更新日期:2012-08-20 00:00:00

  • Drug-in-cyclodextrin-in-liposomes: A novel drug delivery system for flurbiprofen.

    abstract::A novel delivery system based on drug-cyclodextrin (CD) complexation and liposomes has been developed to improve therapeutic effect. Three different means, i.e., co-evaporation (COE), co-ground (GR) and co-lyophilization (COL) and three different CDs (β-CD, HP-β-CD and SBE-β-CD) were contrasted to investigate the char...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.07.011

    authors: Zhang L,Zhang Q,Wang X,Zhang W,Lin C,Chen F,Yang X,Pan W

    更新日期:2015-08-15 00:00:00

  • Gene expression in an intact ex-vivo skin tissue model following percutaneous delivery of cationic liposome-plasmid DNA complexes.

    abstract::The skin represents an attractive site for the localised gene therapy of dermatological pathologies and as a potential antigen bioreactor following transdermal delivery. Potential also exists for the gene therapy of skin as a cosmetic intervention. The most exploited non-viral gene delivery system involves the complex...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(00)00336-7

    authors: Birchall JC,Marichal C,Campbell L,Alwan A,Hadgraft J,Gumbleton M

    更新日期:2000-03-20 00:00:00

  • Entrapment and release of saquinavir using novel cationic solid lipid nanoparticles.

    abstract::Cationic solid lipid nanoparticles (CSLNs) with entrapped saquinavir (SQV) were fabricated by microemulsion method. Here, CSLNs were stabilized by polysorbate 80, and the lipid phase contained cationic stearylamine (SA) and dioctadecyldimethyl ammonium bromide (DODAB) and nonionic Compritol 888 ATO (CA) and cacao butt...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.08.050

    authors: Kuo YC,Chen HH

    更新日期:2009-01-05 00:00:00

  • Mixed backbone antisense glucosylceramide synthase oligonucleotide (MBO-asGCS) loaded solid lipid nanoparticles: in vitro characterization and reversal of multidrug resistance in NCI/ADR-RES cells.

    abstract::In this study, solid lipid nanoparticles (SLN) loaded with MBO-asGCS oligonucleotide were prepared, characterized and evaluated for cytotoxicity against NCI/ADR-RES human ovary cancer cells. Two types of cetyltrimethyl ammonium bromide (CTAB) stabilized SLN, with or without ceramide VI, were prepared by mixed homogeni...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2010.08.044

    authors: Siddiqui A,Patwardhan GA,Liu YY,Nazzal S

    更新日期:2010-11-15 00:00:00

  • Newly developed surface modification punches treated with alloying techniques reduce sticking during the manufacture of ibuprofen tablets.

    abstract::Sticking is a serious problem during the manufacturing process of tablets. In order to prevent this, we used alloying techniques to prepare metal hardening (MH) and electron beam processing infinite product (EIP) punches with rougher asperity of surfaces than a hard chrome plated (HCr) punch. This study evaluated the ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2012.12.006

    authors: Uchimoto T,Iwao Y,Yamamoto T,Sawaguchi K,Moriuchi T,Noguchi S,Itai S

    更新日期:2013-01-30 00:00:00

  • Particle size control of poly(dl-lactide-co-glycolide) nanospheres for sterile applications.

    abstract::Parameters affecting the particle sizes of poly(DL-lactide-co-glycolide) (PLGA) nanospheres produced by the Emulsion Solvent Diffusion (ESD) method were evaluated in this study, so that suitable PLGA nanospheres could be prepared to pass through a membrane filter with 0.2 microm pore size and used as a sterile product...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.11.019

    authors: Tsukada Y,Hara K,Bando Y,Huang CC,Kousaka Y,Kawashima Y,Morishita R,Tsujimoto H

    更新日期:2009-03-31 00:00:00

  • Effect of electrokinetic stabilizers on the physicochemical properties of propofol emulsions.

    abstract::The aims of the present study were to elucidate the potential mechanism of propofol emulsion destabilization following the addition of lidocaine, and to evaluate the effects of various electrokinetic stabilizers on the physicochemical properties of lidocaine-propofol emulsions. The assessments included pH observations...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2010.07.011

    authors: Rhee YS,Park CW,Oh TO,Kim JY,Ha JM,Lee BJ,Lee KH,Chi SC,Park ES

    更新日期:2010-10-15 00:00:00