Group Sequential Design for Randomized Phase III Trials under the Weibull Model.

abstract：:A framework is proposed for making quality predictions in situations for which only systematically inaccurate data are available. The predictions are based on the systematically inaccurate data, complete data from similar situations, and expert knowledge. The proposed predictive model is well suited to functional data...

journal_title：Journal of biopharmaceutical statistics

authors： Haaland B,Chiang AY

更新日期：2014-01-01 00:00:00

abstract：:After a group sequential test, the naive confidence interval (CI) is usually biased in the sense that it does not cover the true parameter at the correct nominal level. Furthermore, when the stopping time is taken into account, the actual conditional confidence coverage probability can be much less accurate. In this a...

journal_title：Journal of biopharmaceutical statistics

authors： Fan X,DeMets DL

更新日期：2006-01-01 00:00:00

abstract：:Highly clustered count data are commonly seen in medical device clinical studies such as cardiac rhythm management. For instance, anti-arrhythmia shocks delivered from an implantable cardioverter-defibrillator (ICD) often occur as "storms", i.e., multiple shocks within a short period of time. There are unique challeng...

journal_title：Journal of biopharmaceutical statistics

authors： Wang ZJ

更新日期：2008-01-01 00:00:00

abstract：:The potency of a batch of drug product needs to meet a release limits at the time of release so that the potency at the end of shelf life remains above the lower registration limit (LRL). This article discusses two methods which determine the release limits such that the chance to fail LRL at the end of shelf life of ...

journal_title：Journal of biopharmaceutical statistics

authors： Wei GC

更新日期：1998-03-01 00:00:00

abstract：:We would like to estimate the parameters of a dose-response function with the greatest precision as possible. For a two-parameter model, this is equivalent to minimizing the area of the confidence ellipsoid, i.e., a D-optimal design. Previous work on this particular model has included minimal designs. These designs ar...

journal_title：Journal of biopharmaceutical statistics

authors： Lupinacci PJ,Raghavarao D

更新日期：2000-02-01 00:00:00

abstract：:Tango (Biostatistics 2016) proposed a new repeated measures design called the S:T repeated measures design, combined with generalized linear mixed-effects models and sample size calculations for a test of the average treatment effect that depend not only on the number of subjects but on the number of repeated measures...

journal_title：Journal of biopharmaceutical statistics

authors： Tango T

更新日期：2017-01-01 00:00:00

abstract：:Four multidose animal carcinogenicity assay trend test procedures based on the chi-square, Hoel-Walburg, log-rank, and Peto procedures are compared under conditions of competing risks. A total of 42 different risk populations are simulated in which a simulated animal can contract one or more of five different tumor ty...

journal_title：Journal of biopharmaceutical statistics

authors： Graves TS

更新日期：1994-11-01 00:00:00

abstract：:The purpose of the research is to develop a statistical decision support algorithm for patients who may benefit from Adjuvant Cisplatin/Vinorelbine (ACT) and improve their survival rates. Genome-wide microarray data are used to identify feasible sets of genes and probe sets that constitute the gene signature. The data...

journal_title：Journal of biopharmaceutical statistics

authors： Moon H,Chao T,Ahn H

更新日期：2020-05-03 00:00:00

abstract：:Failure to recognize the serious implications of heterogeneous correlations and disregard of the multiple test problem in interpreting the results from repeated measurements ANOVA of any single primary outcome measure can produce false-positive error rates that are more than five times the alpha level that is reported...

journal_title：Journal of biopharmaceutical statistics

authors： Overall JE,Doyle SR

更新日期：1996-03-01 00:00:00

abstract：:As more biologic products are going off patent protection, the development of follow-on biologics products has received much attention from both biotechnology industry and the regulatory agencies. Unlike small-molecule drug products, the development of biologic products is very different and variable via the manufactu...

journal_title：Journal of biopharmaceutical statistics

authors： Hsieh TC,Chow SC,Liu JP,Hsiao CF,Chi E

更新日期：2010-01-01 00:00:00

abstract：:The sequential parallel comparison design (SPCD) is a two-stage design recommended for trials with possibly high placebo response. A drug-placebo comparison in the first stage is followed in the second stage by placebo nonresponders being re-randomized between drug and placebo. We describe how SPCD can be used in tria...

journal_title：Journal of biopharmaceutical statistics

authors： Wang JJ,Ivanova A

更新日期：2014-01-01 00:00:00

abstract：:Although asymptotically, the empirical covariance estimator is consistent and robust with respect to the selection of the working correlation matrix, when the sample size is small, its bias may not be negligible. This article proposes a small sample correction for the empirical covariance estimator in general Gaussian...

journal_title：Journal of biopharmaceutical statistics

authors： Fan C,Zhang D,Zhang CH

更新日期：2012-01-01 00:00:00

abstract：:Sample size adjustment at an interim analysis can mitigate the risk of failing to meet the study objective due to lower-than-expected treatment effect. Without modification to the conventional statistical methods, the type I error rate will be inflated, primarily caused by increasing sample size when the interim obser...

journal_title：Journal of biopharmaceutical statistics

authors： Chen YHJ,Yuan SS,Li X

更新日期：2018-01-01 00:00:00

abstract：:The design of a three-arm trial including the experimental treatment, an active reference treatment, and a placebo is recommended as a useful approach to the assessment of noninferiority of the experimental treatment. The inclusion of the placebo arm enables the assessment of assay sensitivity and internal validation,...

journal_title：Journal of biopharmaceutical statistics

authors： Hida E,Tango T

更新日期：2013-01-01 00:00:00

abstract：:The world of medical devices while highly diverse is extremely innovative, and this facilitates the adoption of innovative statistical techniques. Statisticians in the Center for Devices and Radiological Health (CDRH) at the Food and Drug Administration (FDA) have provided leadership in implementing statistical innova...

journal_title：Journal of biopharmaceutical statistics

authors： Campbell G,Yue LQ

更新日期：2016-01-01 00:00:00

abstract：:When performing a pivotal clinical trial, it may be of interest to assess the probability of success (PoS) of that trial. Initially evaluated when the trial is designed, PoS can be updated as the trial progresses and new information about the drug effect becomes available. Such information can be external to the trial...

journal_title：Journal of biopharmaceutical statistics

authors： Rufibach K,Jordan P,Abt M

更新日期：2016-01-01 00:00:00

abstract：:An important application of confirmatory adaptive designs is the data-driven selection of treatment arms in multi-armed trials. A general methodology for adaptive designs is based on the combination testing principle. Using this principle, selection of treatment arms in multi-armed designs, recalculation of sample siz...

journal_title：Journal of biopharmaceutical statistics

authors： Wassmer G

更新日期：2011-07-01 00:00:00

abstract：:The proportion ratio (PR) of a positive response between an experimental treatment and a standard treatment (or placebo) is often used to measure the relative treatment efficacy in a randomized clinical trial (RCT). For ethical reasons, it is almost inevitable to encounter some patients not complying with their assign...

journal_title：Journal of biopharmaceutical statistics

authors： Lui KJ,Chang KC

更新日期：2012-01-01 00:00:00

abstract：:Bowker's test, a generalization of McNemar's test, performs well under the hypothesis of symmetry, but the estimator of variance used in the test is biased when the table is asymmetric and this calls into question the test's performance in non-null situations. We seek an alternative to Bowker's test in search of metho...

journal_title：Journal of biopharmaceutical statistics

authors： May WL,Johnson WD

更新日期：2001-02-01 00:00:00

abstract：:We propose a new adaptive threshold detection and enrichment design in which the biomarker threshold is adaptively estimated and updated by optimizing a trade-off between the size of the biomarker positive population and the magnitude of the treatment effect in that population. Enrichment is based on an enrollment cri...

journal_title：Journal of biopharmaceutical statistics

authors： Wang T,Wang X,George SL,Zhou H

更新日期：2020-11-11 00:00:00

abstract：:The use of adaptive methods in clinical development has become very popular in recent years due to its flexibility in modifying trial procedures and/or statistical procedures of on-going clinical trials. Modifications to trial procedures are usually documented by protocol amendments. However, the actual patient popula...

journal_title：Journal of biopharmaceutical statistics

authors： Chow SC,Shao J

更新日期：2005-01-01 00:00:00

abstract：:Ratio of means (ROM) and difference of means (DOM) are often used in a superiority, noninferiority (NI), or average bioequivalence (ABE) test to evaluate whether the test mean is superior, NI, or equivalent to the reference (placebo or active control) mean. The literature provides recommendations regarding how to choo...

journal_title：Journal of biopharmaceutical statistics

authors： Sun W,Grosser S,Tsong Y

更新日期：2017-01-01 00:00:00

abstract：:In clinical trials, it is important to set up a design to reach a decision on effectiveness of a drug in treating a disease with the loss of the minimum number of patients. Group sequential designs are very beneficial on this point. However, the proportional hazards assumption must hold to work under a group sequentia...

journal_title：Journal of biopharmaceutical statistics

authors： Demirhan H,Demirhan YP,Bacanli S

更新日期：2013-03-11 00:00:00

abstract：:Due to the potential impact of ethnic factors on clinical outcomes, the global registration of a new treatment is challenging. China and Japan often require local trials in addition to a multiregional clinical trial (MRCT) to support the efficacy and safety claim of the treatment. The impact of ethnic factors on the t...

journal_title：Journal of biopharmaceutical statistics

authors： Huang Q,Chen G,Yuan Z,Lan KK

更新日期：2012-09-01 00:00:00

abstract：:Predictive probability is particularly useful in aiding a decision-making process related to drug development. This is especially true for decisions occurring as the result of interim analyses of clinical trials. Examples of clinical trial applications of Bayesian predictive probability and the use of the beta-binomia...

journal_title：Journal of biopharmaceutical statistics

authors： Johns D,Andersen JS

更新日期：1999-03-01 00:00:00

abstract：:Bayesian decision procedures have already been proposed for and implemented in Phase I dose-escalation studies in healthy volunteers. The procedures have been based on pharmacokinetic responses reflecting the concentration of the drug in blood plasma and are conducted to learn about the dose-response relationship whil...

journal_title：Journal of biopharmaceutical statistics

authors： Whitehead J,Zhou Y,Hampson L,Ledent E,Pereira A

更新日期：2007-01-01 00:00:00

abstract：:We consider the problem of estimating a biomarker-based subgroup and testing for treatment effect in the overall population and in the subgroup after the trial. We define the best subgroup as the subgroup that maximizes the power for comparing the experimental treatment with the control. In the case of continuous outc...

journal_title：Journal of biopharmaceutical statistics

authors： Joshi N,Fine J,Chu R,Ivanova A

更新日期：2019-01-01 00:00:00

abstract：:For approval of generic drugs, the U.S. Food and Drug Administration (FDA) requires the evidence of bioequivalence in average bioavailability be provided. This is based on the Fundmental Bioequivalence Assumption from FDA that if two drug products are shown to be bioequivalent, it is assumed that they are therapeutica...

journal_title：Journal of biopharmaceutical statistics

authors： Lu Y,Zhang ZZ,Chow SC

更新日期：2014-01-01 00:00:00

abstract：:According to ICH Q6A (1999), a specification is defined as a list of tests, references to analytical procedures, and appropriate acceptance criteria, which are numerical limits, ranges, or other criteria for the tests described. For drug products, specifications usually consist of test methods and acceptance criteria ...

journal_title：Journal of biopharmaceutical statistics

authors： Dong X,Tsong Y,Shen M

更新日期：2015-01-01 00:00:00

abstract：:The outcome selection of bioequivalence evaluations for abbreviated new drug applications results in bias towards unity of test-reference ratio estimates, and underestimation of intrasubject variability for the test drug product. In this study, the selection bias in the estimates of testreference ratio and intrasubjec...

journal_title：Journal of biopharmaceutical statistics

authors： Wang Y

更新日期：2000-08-01 00:00:00