Amphotericin B-incorporated polymeric micelles composed of poly(d,l-lactide-co-glycolide)/dextran graft copolymer.

Abstract:

:In this study, we prepared amphotericin B (AmpB)-encapsulated polymeric micelle of poly(d,l-lactide-co-glycolide) (PLGA) grafted-dextran (DexLG) copolymer and characterized its physicochemical properties in vitro. The average particle size of AmpB-encpasulated DexLG polymeric micelles was around 30-150nm while particle size of empty polymeric micelles was below 100nm according to the copolymer composition. The morphology of AmpB-encapsulated polymeric micelle of DexLG copolymer was spherical shapes at transmission electron microscopy (TEM) observation. At 1H NMR study, specific peaks of AmpB and DexLG copolymer was obtained at DMSO but specific peaks characterized to AmpB and PLGA was disappeared at D2O environment. These results indicated that AmpB was encapsulated into the micellar core of polymeric micelle. XRD results also support these results, indicating that specific crystal peaks of AmpB and broad peaks of DexLG copolymer were obtained but specific peaks of AmpB was disappeared at polymeric micelles while physical mixture of AmpB/empty polymeric micelles showed both specific peaks. Drug release rate was decreased according to the increase of drug contents and increase of PLGA component of DexLG copolymer. At the minimal inhibition concentration (MIC) study using Candida albicans, AmpB-encapsulated polymeric micelle showed almost similar effectives on the growth inhibition of microorganisms. These showed that AmpB-encapsulated polymeric micelle of DexLG copolymer can be considered to potential antifungal agent carriers.

journal_name

Int J Pharm

authors

Choi KC,Bang JY,Kim PI,Kim C,Song CE

doi

10.1016/j.ijpharm.2007.12.011

subject

Has Abstract

pub_date

2008-05-01 00:00:00

pages

224-30

issue

1-2

eissn

0378-5173

issn

1873-3476

pii

S0378-5173(07)01039-3

journal_volume

355

pub_type

杂志文章
  • Construction and physiochemical characterisation of a multi-composite, potential oral vaccine delivery system (VDS).

    abstract::An increasing human population requires a secure food supply and a cost effective, oral vaccine delivery system for livestock would help facilitate this end. Recombinant antigen adsorbed onto silica beads and coated with myristic acid, was released (∼15% (w/v)) over 24 h at pH 8.8. At pH 2, the myristic acid acted as ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2014.03.046

    authors: Pettit MW,Dyer PD,Mitchell JC,Griffiths PC,Alexander B,Cattoz B,Heenan RK,King SM,Schweins R,Pullen F,Wicks SR,Richardson SC

    更新日期:2014-07-01 00:00:00

  • Microencapsulation of amorphous solid dispersions of fenretinide enhances drug solubility and release from PLGA in vitro and in vivo.

    abstract::The purpose of this study was to develop solid dispersions of fenretinide(4HPR), incorporate them into poly(lactic-co-glycolic)(PLGA) millicylindrical implants, and evaluate the resulting implants in vitro and in vivo for future applications in oral cancer chemoprevention. Due to the extreme hydrophobicity of 4HPR, 4H...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119475

    authors: Nieto K,Mallery SR,Schwendeman SP

    更新日期:2020-08-30 00:00:00

  • Magnetic nanoparticles: In vivo cancer diagnosis and therapy.

    abstract::Recently, significant research efforts have been devoted to the finding of efficient approaches in order to reduce the side effects of traditional cancer therapy and diagnosis. In this context, magnetic nanoparticles have attracted much attention because of their unique physical properties, magnetic susceptibility, bi...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2015.07.059

    authors: Lima-Tenório MK,Pineda EA,Ahmad NM,Fessi H,Elaissari A

    更新日期:2015-09-30 00:00:00

  • Incorporation of a model protein into chitosan-bile salt microparticles.

    abstract::In order to develop a mucosal delivery system based on biocompatible polymers, a new methodology for production of protein-loaded microparticles is developed. Chitosan anionic precipitation/coacervation is accomplished by the addition of sodium deoxycholate (DCA). These microparticles were prepared under mild conditio...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2006.01.006

    authors: Lameiro MH,Lopes A,Martins LO,Alves PM,Melo E

    更新日期:2006-04-07 00:00:00

  • Optimization of miRNA delivery by using a polymeric conjugate based on deoxycholic acid-modified polyethylenimine.

    abstract::Safe and efficient delivery of microRNA (miRNA) molecules is essential for their successful transition from research to the clinic setting. In the present study, we have used a bile acid, deoxycholic acid (DA), to modify 1.8 kDa branched polyethylenimine (bPEI1.8) and subsequently investigated gene delivery features o...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2019.05.009

    authors: Radmanesh F,Abandansari HS,Pahlavan S,Alikhani M,Karimi M,Rajabi S,Kazemi B,Baharvand H

    更新日期:2019-06-30 00:00:00

  • In vitro and in vivo evaluation of linezolid loaded electrospun PLGA and PLGA/PCL fiber mats for prophylaxis and treatment of MRSA induced prosthetic infections.

    abstract::In this study, it was aimed to formulate linezolid loaded electrospun PLGA and PCL fiber mats doing controlled drug release, to be used in the treatment and prophylaxis of the prosthesis related infections. The effect of PLGA concentration, PLGA to PCL ratio and the amount of linezolid on the fiber and mat properties ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2019.118758

    authors: Eren Boncu T,Uskudar Guclu A,Catma MF,Savaser A,Gokce A,Ozdemir N

    更新日期:2020-01-05 00:00:00

  • One-week in vivo sustained release of a peptide formulated into in situ forming implants.

    abstract::The LR12 peptide has been reported to reduce the size of infarct and improve both cardiac function and survival in myocardial infarction in murine models, after daily repeated intraperitoneal injections. In order to protect peptide from degrading and to prolong its release, in situ implants based on biocompatible biod...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.02.046

    authors: Parent M,Clarot I,Gibot S,Derive M,Maincent P,Leroy P,Boudier A

    更新日期:2017-04-15 00:00:00

  • Chemical modifications of insulin: Finding a compromise between stability and pharmaceutical performance.

    abstract::Insulin, a key peptide hormone that conjointly with its receptor regulates blood glucose levels, is used as the major means to treat diabetes. This therapeutic hormone may undergo different chemical modifications during industrial processes, pharmaceutical formulation, and through its endogenous storage in the pancrea...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2018.06.023

    authors: Akbarian M,Ghasemi Y,Uversky VN,Yousefi R

    更新日期:2018-08-25 00:00:00

  • Powder bed 3D-printing of highly loaded drug delivery devices with hydroxypropyl cellulose as solid binder.

    abstract::3D-printing is a promising tool to pave the way to the widespread adaption of individualized medicine. Several printing techniques have been investigated and introduced to pharmaceutical research. Until now, only one 3D-printed medicine is approved on the US market. The medicine is manufactured via drop-on-powder depo...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2018.11.048

    authors: Infanger S,Haemmerli A,Iliev S,Baier A,Stoyanov E,Quodbach J

    更新日期:2019-01-30 00:00:00

  • Fabrication of inhalable spore like pharmaceutical particles for deep lung deposition.

    abstract::An innovative strategy of fabricating uniform spore like drug particles to improve pulmonary drug delivery efficiency was disclosed in the present study. Spore like particles were prepared through combination of high gravity controlled precipitation and spray drying process with insulin as model drug first, showing ro...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2012.03.044

    authors: Shen ZG,Chen WH,Jugade N,Gao LY,Glover W,Shen JY,Yun J,Chen JF

    更新日期:2012-07-01 00:00:00

  • Emerging trends in the stabilization of amorphous drugs.

    abstract::The number of active pharmaceutical substances having high therapeutic potential but low water solubility is constantly increasing, making it difficult to formulate these compounds as oral dosage forms. The solubility and dissolution rate, and thus potentially the bioavailability, of these poorly water-soluble drugs c...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章,评审

    doi:10.1016/j.ijpharm.2012.04.066

    authors: Laitinen R,Löbmann K,Strachan CJ,Grohganz H,Rades T

    更新日期:2013-08-30 00:00:00

  • Preparation, characterization and drug release behavior of polyion complex micelles.

    abstract::Double-hydrophilic block copolymer composed of poly(N-vinylpyrrolidone) (PVP) and poly(styrene-alter-maleic anhydride) (PSMA) has been synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Poly(N-vinylpyrrolidone)-block-poly(styrene-alter-maleic anhydride) (PVP-b-PSMA) thus formed was ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2009.03.019

    authors: Luo Y,Wang A,Yuan J,Gao Q

    更新日期:2009-06-05 00:00:00

  • Application of spherical silicate to prepare solid dispersion dosage forms with aqueous polymers.

    abstract::The objective of this study is to prepare and characterize solid dispersions of nifedipine (NP) using porous spherical silicate micro beads (MB) that were approximately 100 μm in diameter with vinylpyrrolidone/vinyl acetate copolymer (PVP/VA) and a Wurster-type fluidized bed granulator. Compared with previously report...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.07.037

    authors: Nagane K,Kimura S,Ukai K,Takahashi C,Ogawa N,Yamamoto H

    更新日期:2015-09-30 00:00:00

  • Formulation of sustained release nanoparticles loaded with a tripentone, a new anticancer agent.

    abstract::The purpose of the present work is to develop nanoparticles of a new antitubulin agent of the family of tripentones by means of a phase inversion process. Dynamic light scattering, transmission electron microscopy and zeta-potential measurements were used to characterize tripentone loaded nanoparticles. From interfaci...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2006.04.007

    authors: Malzert-Fréon A,Vrignaud S,Saulnier P,Lisowski V,Benoît JP,Rault S

    更新日期:2006-08-31 00:00:00

  • Ascorbyl-dipalmitate-stabilised nanoemulsions as a potential localised treatment of inflammatory bowel diseases.

    abstract::Current efforts on inflammatory bowel diseases (IBD) treatment are focused on strategies for localised drug delivery at the intestinal mucosa. Despite the potential of curcumin (CC) for IBD treatment, its low solubility and stability limit its application. Thus, the design of nanocarriers that focus CC delivery at the...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2020.119533

    authors: Plaza-Oliver M,Beloqui A,Santander-Ortega MJ,Castro-Vázquez L,Rodríguez-Robledo V,Arroyo-Jiménez MM,Préat V,Lozano MV

    更新日期:2020-08-30 00:00:00

  • Characterization of Re-188-Sn microparticles used for synovitis treatment.

    abstract::Rhenium-188 labeled tin (Sn) microparticles were developed for pain palliation therapy in the patients suffering from synovitis with acute pain. The rhenium tin microparticles were prepared using stannous chloride and freshly eluted (188)ReO(4)(-) from (188)W/(188)Re generator. The aggregated colloidal particles, pack...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2007.01.014

    authors: Shukla J,Bandopadhyaya GP,Shamim SA,Kumar R

    更新日期:2007-06-29 00:00:00

  • Production and evaluation of size reduced grades of microcrystalline cellulose.

    abstract::Size reduction of microcrystalline cellulose (MCC, Avicel PH-101) powder by ball milling was poorly effective, particularly in the presence of sodium lauryl sulphate (SLS), which tended to form a protective foam. Ultrasonic homogenisation of an aqueous suspension more readily produced ultra-fine MCC, even in the prese...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(00)00652-9

    authors: Levis SR,Deasy PB

    更新日期:2001-02-01 00:00:00

  • Improved photodynamic activity of porphyrin loaded into nanoparticles: an in vivo evaluation using chick embryos.

    abstract::Hydrophobic porphyrins are potentially interesting molecules for the photodynamic therapy (PDT) of solid cancers or ocular vascularization diseases. Their pharmaceutical development is, however, hampered by their lipophilicity, which renders formulation difficult especially when intravenous administration is needed. E...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2004.07.029

    authors: Vargas A,Pegaz B,Debefve E,Konan-Kouakou Y,Lange N,Ballini JP,van den Bergh H,Gurny R,Delie F

    更新日期:2004-11-22 00:00:00

  • PEGylated doxorubicin nanoparticles mediated by HN-1 peptide for targeted treatment of oral squamous cell carcinoma.

    abstract::HN-1, a 12-amino acid peptide, has been reported to possess strong capabilities for targeting and penetrating head and neck squamous cell carcinoma. Here, we designed a simple but effective nanoparticle system for the delivery of doxorubicin (DOX) targeting oral squamous cell carcinoma (OSCC) through the mediation of ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.04.027

    authors: Wang Y,Wan G,Li Z,Shi S,Chen B,Li C,Zhang L,Wang Y

    更新日期:2017-06-15 00:00:00

  • Microagglomeration of pulverized pharmaceutical powders using the Wurster process I. Preparation of highly drug-incorporated, subsieve-sized core particles for subsequent microencapsulation by film-coating.

    abstract::A novel agglomeration process of pulverized pharmaceutical powders into subsieve-sized agglomerates (microagglomeration) was designed for manufacturing highly drug-incorporated core particles for subsequent microencapsulation by film-coating. The microagglomeration of pulverized phenacetin powder, whose mass median di...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00006-x

    authors: Ichikawa H,Fukumori Y

    更新日期:1999-04-15 00:00:00

  • Determination of n-octanol/water partition and membrane binding of cationic porphyrins.

    abstract::Porphyrin and their derivatives are being systematically studied as photosensitizers for photodynamic therapy. The ability to predict their membrane partition properties is of key importance to unveil their in vivo activity and applications. Several n-octanol/water partition coefficients (logP(OW)) of porphyrin deriva...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2006.08.008

    authors: Engelmann FM,Rocha SV,Toma HE,Araki K,Baptista MS

    更新日期:2007-02-01 00:00:00

  • Core-shell structured Fe3O4@TiO2-doxorubicin nanoparticles for targeted chemo-sonodynamic therapy of cancer.

    abstract::To facilitate targeting drug delivery and combined therapy, we develop titanium dioxide-encapsulated Fe3O4 nanoparticles (Fe3O4@TiO2 NPs). Titanium dioxide (TiO2), which is employed as a sonosensitizer for sonodynamic therapy (SDT), can also be used for the loading of doxorubicin (DOX). The fabricated Fe3O4@TiO2 NPs e...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2015.03.070

    authors: Shen S,Wu L,Liu J,Xie M,Shen H,Qi X,Yan Y,Ge Y,Jin Y

    更新日期:2015-01-01 00:00:00

  • Mechanistic study on rapid fabrication of fibrous films via centrifugal melt spinning.

    abstract::Fibrous films have attracted considerable attention in the field of drug delivery and wound dressings owing to their porous structure and highly aligned fiber orientation. However, current fabrication methods such as electrospinning have certain limitations, including high voltage requirement and conductivity dependen...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2019.02.005

    authors: Yang Y,Zheng N,Zhou Y,Shan W,Shen J

    更新日期:2019-04-05 00:00:00

  • Drug release from and mechanical properties of press-coated tablets with hydroxypropylmethylcellulose acetate succinate and plasticizers in the outer shell.

    abstract::Dissolution profiles of diltiazem hydrochloride (DIL) contained in core tablets from press-coated (PC) tablets with hydroxypropylmethylcellulose acetate succinate (HPMCAS) and plasticizers-adsorbent in the outer shell were investigated. Although, on the addition of triethyl citrate (TEC), triacetin (TA), and acetyltri...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(01)00578-6

    authors: Fukui E,Miyamura N,Yoneyama T,Kobayashi M

    更新日期:2001-04-17 00:00:00

  • pH-sensitive and mucoadhesive thiolated Eudragit-coated chitosan microspheres.

    abstract::The aim of this study was using Eudragit-cysteine conjugate to coat on chitosan microspheres (CMs) for developing an oral protein drug delivery system, having mucoadhesive and pH-sensitive property. Bovine serum albumin (BSA) as a protein model drug was loaded in thiolated Eudragit-coated CMs (TECMs) to study the rele...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2008.04.003

    authors: Quan JS,Jiang HL,Kim EM,Jeong HJ,Choi YJ,Guo DD,Yoo MK,Lee HG,Cho CS

    更新日期:2008-07-09 00:00:00

  • Temperature-sensitive copolymer-coated fluorescent mesoporous silica nanoparticles as a reactive oxygen species activated drug delivery system.

    abstract::In this study, a temperature and ROS-responsive drug delivery system ROSP@MSN based on mesoporous silica nanoparticles has been designed and synthesized by taking advantage of 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate modified polymers (ROSP) as "nano-valve", which can respond selectively to cance...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2017.11.025

    authors: Yu F,Wu H,Tang Y,Xu Y,Qian X,Zhu W

    更新日期:2018-01-30 00:00:00

  • A mechanism on the drug release into a perfect sink from a coated planar matrix with a super-saturation loading in the core.

    abstract::A comprehensive model is proposed to accurately describe drug release kinetics from a coated plane sheet when drug loading in the core is above its saturation level. The general solutions are acquired in a dimensionless form by the Laplace transform and the solution for the special case-a perfect sink condition, is de...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00373-7

    authors: Tongwen X,Binglin H

    更新日期:2000-03-20 00:00:00

  • The use of MTDSC to assess the amorphous phase content of a micronized drug substance.

    abstract::Mechanical treatments such as grinding, milling or micronization applied to crystalline drug substances may induce changes such as the occurrence of crystal defects and/or amorphous regions. These changes are likely to affect the chemical and physical properties of the material as well as the corresponding drug produc...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(99)00273-2

    authors: Guinot S,Leveiller F

    更新日期:1999-12-01 00:00:00

  • Buccal adhesive films with moisturizer- the next level for dry mouth syndrome?

    abstract::This study was undertaken to prepare films by solvent evaporation method comprising well-known polymers in order to investigate their potential for buccal suitability. Mucoadhesive films were manufactured using different polymers such as ethyl cellulose, hydroxyethyl cellulose, hydroxypropyl methylcellulose as well as...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/j.ijpharm.2018.08.032

    authors: Laffleur F,Krouská J,Tkacz J,Pekař M,Aghai F,Netsomboon K

    更新日期:2018-10-25 00:00:00

  • Lyoprotection of aviscumine with low molecular weight dextrans.

    abstract::The aim of this research was to ascertain whether dextrans with low molecular weight will stabilize aviscumine. During freeze-drying increasing concentrations of dextran T1 (MW 1000) stabilized aviscumine. Eight percent of dextran resulted in a nearly 100% recovery of the activity and in addition a complete amorphous ...

    journal_title:International journal of pharmaceutics

    pub_type: 杂志文章

    doi:10.1016/s0378-5173(03)00234-5

    authors: Gloger O,Witthohn K,Müller BW

    更新日期:2003-07-09 00:00:00