Abstract:
:The purpose of this study was to investigate the formation mechanism of colloidal nanoparticles after dispersion of probucol/polyvinylpyrrolidone (PVP)/sodium dodecyl sulphate (SDS) ternary ground mixture (GM) into water. Probucol, PVP and SDS were mixed at a weight ratio of 1:3:1 and ground for 30 min with a vibrational rod mill. The morphology and physicochemical properties were investigated through high resolution scanning electron microscopy (SEM), environmental SEM, dynamic light scattering, (13)C NMR and zeta potential measurements. SEM images confirmed the presence of 20 nm size primary particles in the GM powder of probucol/PVP K17/SDS. Spherical nanoparticles with a size of around 100 nm, formed after dispersion of the GM into water, suggested an agglomeration of the primary particles. A further agglomeration of around 160 nm was observed with the stability experiment. Zeta potential and particle size measurements using latex beads revealed that PVPK 17/SDS complex was adsorbed on the probucol particle surface forming a layered structure. A similar agglomeration behavior was observed using the GM of probucol/PVP K12/SDS, though the molecular state of the PVPK 12/SDS complex at the particle surface was different from that of the PVPK 17/SDS complex. (13)C NMR results suggested that intermolecular interactions between PVP K12 and SDS did not reach the same level as the interactions between PVP K17 and SDS. This study proposed a formation mechanism of colloidal nanoparticles.
journal_name
Int J Pharmjournal_title
International journal of pharmaceuticsauthors
Pongpeerapat A,Wanawongthai C,Tozuka Y,Moribe K,Yamamoto Kdoi
10.1016/j.ijpharm.2007.10.052subject
Has Abstractpub_date
2008-03-20 00:00:00pages
309-16issue
1-2eissn
0378-5173issn
1873-3476pii
S0378-5173(07)00879-4journal_volume
352pub_type
杂志文章abstract::We developed a polyethylene glycol (PEG)-based biodegradable hydrogel through disulfide crosslinking of polyethylene oxide sulfide (PEOS). The crosslinking rate was highly dependent on temperature, and incubation at about 40-50 degrees C was required for efficient crosslinking. The crosslinked PEOS hydrogel showed glu...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2009.03.010
更新日期:2009-06-05 00:00:00
abstract::It has been demonstrated that orally administered cholestyramine is distributed throughout the stomach and provides prolonged gastric residence via mucoadhesion. Gamma scintigraphy was used to compare the gastric emptying and residence of this resin with two formulations known to exhibit retentive or bioadhesive prope...
journal_title:International journal of pharmaceutics
pub_type: 临床试验,杂志文章,随机对照试验
doi:10.1016/s0378-5173(00)00600-1
更新日期:2001-01-05 00:00:00
abstract::In situ amorphization is a concept that allows to amorphize a given drug in its final dosage form right before administration. Hence, this approach can potentially be used to circumvent recrystallization issues that other amorphous formulation approaches are facing during storage. In this study, the feasibility of mic...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2017.01.035
更新日期:2017-03-15 00:00:00
abstract::In the pharmaceutical field, manufacturing processes which are able to make products with tailored size at suitable shear stress conditions and high productivity are important requirements for their industrial application. Cross-flow and premix membrane emulsification are the membrane-based processes generally used fo...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2014.10.049
更新日期:2014-12-30 00:00:00
abstract::Solid lipid nanoparticles have been reported as possible carrier for skin drug delivery. Solid lipid nanoparticles are produced from biocompatible and biodegradable lipids. Solid lipid nanoparticles made of semi-synthetic triglycerides stabilized with a mixture of polysorbate and sorbitan oleate were loaded with 5% of...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2011.06.014
更新日期:2011-09-15 00:00:00
abstract::Conventional lipid microspheres (LM) were prepared using soybean oil and lipid at a 5.5:1 weight ratio with lipid phase consisting of PC (phosphatidyl choline):CH (cholesterol) (1:0.5) by molar ratio. The average diameter of the particles was 150 nm. Long-circulating microspheres (S-LM) were also prepared similarly bu...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2004.11.017
更新日期:2005-02-16 00:00:00
abstract::Biocompatible and thermosensitive poly(organophosphazenes) with a lower critical solution temperature (LCST) below body temperature have been designed with the aim for the local delivery of peptide and protein drugs. These polymers could be synthesized by introducing short chain tri- or tetraethylene glycol as a hydro...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2006.02.009
更新日期:2006-05-11 00:00:00
abstract::Despite that in solution we cannot detect the interaction between Ni(2+) and mitoxantrone (MIT), Ni(2+) could mediate effective and stable MIT loading into large unilamellar vesicles (LUVs). The presence of nigericin had almost no influences on MIT encapsulation. However, in the presence of NH(3), the drug loading kin...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2008.09.045
更新日期:2009-02-23 00:00:00
abstract::This study aims to improve understanding of the powder fluidisation and aerosolisation processes unique to a split capsule dry powder inhaler. It uses a combination of dynamic real-time methods and a suite of powder material physicochemical characterisation methods. The study focused on examining the effect of differe...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2014.08.038
更新日期:2014-12-30 00:00:00
abstract::Hot-melt extrusion has attracted considerable interest within the pharmaceutical industry. However, there remains some uncertainty as to how to characterise the physical structure of the extruded systems, particularly in terms of identifying the nature of the drug dispersion within the polymer. The aim of the study wa...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2007.11.048
更新日期:2008-04-16 00:00:00
abstract::Thermal isoeffect dose (TID) is a widely applied concept to evaluate the safety of medical devices that can expose patients to heat. However, it has rarely been used in photothermal therapy (PTT), where nanoparticles are used as light absorbers. Utilizing TID in an appropriate way would make it feasible to compare the...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2020.119657
更新日期:2020-09-25 00:00:00
abstract::The present investigation is based on a study of the effect of buffer and non-buffer divalent anions (phosphate, sulphate, tartrate, succinate, malonate) on the kinetics, product distribution and photodegradation pathways of riboflavin (RF) at pH 6.0-8.0. RF solutions (5x10(-5)M) were photodegraded in the presence of ...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2010.01.042
更新日期:2010-05-10 00:00:00
abstract::Thermosensitive hydrogels are in situ gelling systems composed of hydrophilic homopolymers or block copolymers which remain as solutions at room temperature and form gels after administration into the body. Its application in advanced drug delivery has gained significant attention in recent years. The tunable characte...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2019.01.030
更新日期:2019-03-25 00:00:00
abstract::Well known aging problems with rubbery starch films are the migration of plasticizer and increased crystallinity leading to embrittlement. The effects of a combination of sorbitol and glycerol used as plasticizers on mechanical, moisture permeability and solid-state properties of rubbery amylose maize starch (Hylon VI...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(02)00585-9
更新日期:2003-01-30 00:00:00
abstract::Microemulsions show excellent potential as drug delivery systems, but the surfactants used to prepare them can cause side effects. Researchers have explored various strategies to expand microemulsion area and thereby reduce the surfactant content necessary, but how these strategies affect drug oral bioavailability has...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2014.05.031
更新日期:2014-08-25 00:00:00
abstract::The purpose of the present work is to develop nanoparticles of a new antitubulin agent of the family of tripentones by means of a phase inversion process. Dynamic light scattering, transmission electron microscopy and zeta-potential measurements were used to characterize tripentone loaded nanoparticles. From interfaci...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2006.04.007
更新日期:2006-08-31 00:00:00
abstract::The vaginal mucosa is the most common site of infection for viruses that are transmitted through heterosexual intercourse, including human immunodeficiency virus and papillomavirus. Thus, in order to prevent or respond to these infections, strong vaginal immunity is required as the first line of defense. We previously...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2013.02.018
更新日期:2013-04-15 00:00:00
abstract::Several classes of antifungal have been employed in candidiasis treatment, but patients with advanced immunodeficiency can present unsatisfactory results after therapy. In these cases, high doses of drugs or the use of multiple agents are sometimes used, and hence increasing the risk of serious side effects. Consideri...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2007.08.002
更新日期:2008-02-12 00:00:00
abstract::The use of experimental design for the robustness testing of a flow-through dissolution method (Ph Eur/USP Apparatus 4) for atovaquone, one of the drug substances in a dual-active anti-malarial tablet formulation, Malarone tablets, is described. This procedure was developed to overcome the suppression of the atovaquon...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(00)00509-3
更新日期:2000-09-25 00:00:00
abstract::In order to evaluate the solubility effect of grafted moiety on the physicochemical properties of poly(d,l-lactide) (PLA) based nanoparticles (NPs), two materials of completely different aqueous solubility, polyethylene glycol (PEG) and palmitic acid were grafted on PLA backbone at nearly the same grafting density, 2....
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2009.12.059
更新日期:2010-03-30 00:00:00
abstract::Artemether (AM) plus azithromycin (AZ) rectal co-formulations were studied to provide pre-referral treatment for children with severe febrile illnesses in malaria-endemic areas. The target profile required that such product should be cheap, easy to administer by non-medically qualified persons, rapidly effective again...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2014.04.023
更新日期:2014-07-01 00:00:00
abstract::Hexamidine diisethionate (HEX D) has been used in the personal care industry and in a number of over-the-counter (OTC) drug products as an antimicrobial agent since the 1950's. Recently, the compound has also been investigated for its beneficial effects on skin health. Surprisingly, there is only limited information d...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.07.071
更新日期:2015-09-30 00:00:00
abstract::A series of thermoresponsive-co-biodegradable polymers, containing varying molar ratios of N-isopropylacrylamide (NIPA) and poly-lactic acid diacrylate macromer (PLAM) were prepared and characterised. Chemical structures were confirmed by nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR). The hydr...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2008.08.036
更新日期:2009-01-21 00:00:00
abstract::The dissolution mechanism of a poorly aqueous soluble drug from amorphous solid dispersions was investigated using a combination of two imaging methods: attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopic imaging and magnetic resonance imaging (MRI). The rates of elementary processes such a...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.02.035
更新日期:2015-04-10 00:00:00
abstract::The aim of this study was to investigate the importance of liposome structure in oestradiol skin delivery as a tool for understanding the delivery mechanism from lipid vesicles. Liposomes of phosphatidylcholine (PC) (1), PC, sodium cholate; 86:14 w/w (II), PC, Span 80; 86.7:13.3 w/w (III) and PC, oleic acid: 84:16 w/w...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(00)00493-2
更新日期:2000-08-25 00:00:00
abstract::The objective of the study is to fabricate multifunctional mesoporous silica nanoparticles for achieving co-delivery of conventional antitumor drug paclitaxel (PTX) and the multidrug resistance reversal agent tetrandrine (TET) expecting to overcome multidrug resistance of MCF-7/ADR cells. The nanoparticles were facile...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.05.010
更新日期:2015-07-15 00:00:00
abstract::Pulmonary hypertension (PAH) is a condition of the lungs characterised by an elevated arterial pressure and increased vascular resistance. Existing medications have to be administered frequently, resulting in non compliance by patients. Little work has been reported to date where microspheres have been developed to co...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2013.04.011
更新日期:2013-06-25 00:00:00
abstract::In this report, we describe the design of an aerosol exposure chamber to reproducibly produce uniformly distributed clouds of droplet nuclei. The device can deliver desired number of bacilli (20-2000) in lungs of mice. All safety measures to handle infectious bacteria have been incorporated in the design and it is con...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(03)00023-1
更新日期:2003-04-14 00:00:00
abstract::In this study, a model drug, acetaminophen (APAP), was melt mixed with poly(ethylene oxide) (PEO) using a Brabender mixer. APAP was found to recrystallize upon cooling to room temperature for all the drug loadings investigated. Higher drug loading leads to faster recrystallization rate. However, the morphology of the ...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2010.04.033
更新日期:2010-08-16 00:00:00
abstract::A novel drug delivery system (DDS) with sustained release properties was developed to allow ocular protein delivery. The DDS developed is aimed at overcoming stability issues during preparation such as denaturation of proteins caused by shear forces applied or due to elevated temperatures and air entrapment potentiall...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.01.042
更新日期:2015-03-15 00:00:00