Abstract:
:Cascade impactor analysis is the standard technique for in vitro characterization of aerosol clouds generated by medical aerosol generators. One important reason for using this inertial separation principle is that drug fractions are classified into aerodynamic size ranges that are relevant to the deposition in the respiratory tract. Measurement of these fractions with chemical detection methods enables establishment of the particle size distribution of the drug in the presence of excipients. However, the technique is laborious and time consuming and most of the devices used for inhaler evaluation lack sufficient possibilities for automation. In addition to that, impactors often have to be operated under conditions for which they were not designed and calibrated. Particularly, flow rates through impactors are increased to values at which the flow through the nozzles is highly turbulent. This has an uncontrolled influence on the collection efficiencies and cut-off curves of these nozzles. Moreover, the cut-off value varies with the flow rate through an impactor nozzle. On the other hand, the high air flow resistances of most impactors are rather restricting to the attainable (fixed) inspiratory flow curves through these devices. Especially for breath actuated dry powder inhalers, higher flow rates and flow increase rates may be desirable than can be achieved in combination with a particular type of impactor. In this paper, the applicability of laser diffraction technology is evaluated as a very fast and highly reliable alternative for cascade impactor analysis. With this technique, aerodynamic diameters cannot be measured, but for comparative evaluation and development, comprising most in vitro applications, this is not necessary. Laser diffraction has excellent possibilities for automated recording of data and testing conditions, and the size classes are independent of the flow rate. Practical limitations can be overcome by using a special inhaler adapter which enables control of the inspiratory flow curve through the inhaler, analysis of the emitted fine particle mass fraction and pre-separation of large particles during testing of dry powder inhalers containing adhesive mixtures.
journal_name
Int J Pharmjournal_title
International journal of pharmaceuticsauthors
de Boer AH,Gjaltema D,Hagedoorn P,Frijlink HWdoi
10.1016/s0378-5173(02)00526-4keywords:
subject
Has Abstractpub_date
2002-12-05 00:00:00pages
219-31issue
1-2eissn
0378-5173issn
1873-3476pii
S0378517302005264journal_volume
249pub_type
杂志文章abstract::In the 1990s chitosan turned out to be a useful excipient in various pharmaceutical formulations. By modifications of the primary amino group at the 2-position of this poly(beta1-->4 D-glucosamine), the features of chitosan can even be optimised according to a given task in drug delivery systems. For peroral peptide d...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章,评审
doi:10.1016/s0378-5173(99)00365-8
更新日期:2000-01-20 00:00:00
abstract::This review article is focused on the sterilization techniques used for polymer-based implantable medical devices as well as the regulatory aspects governing sterile medical devices. Polymeric materials are increasingly used in implantable devices due to their biodegradable and biocompatible nature. Patients and medic...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章,评审
doi:10.1016/j.ijpharm.2017.12.003
更新日期:2018-06-15 00:00:00
abstract::Whether mini-tablets (tablets, diameters ≤6mm) belong to single- or multiple-unit dosage forms is still questionable. Accordingly, Pharmacopoeial evaluation procedures for mini-tablets are lacking. In this study, the aforementioned points were discussed. Moreover, their potential for oral controlled delivery was asses...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.04.021
更新日期:2015-07-05 00:00:00
abstract::The chemical potentials of drug-polymer electrostatic interaction have been utilized to develop a novel ternary chitosan-ibuprofen-gellan nanogel as controlled transdermal delivery tool for ibuprofen. The ternary nanogels were prepared by a combination of electrostatic nanoassembly and ionic gelation techniques. The e...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.05.030
更新日期:2015-07-25 00:00:00
abstract::An aerosol system is described for the generation and delivery of measured doses of monodisperse therapeutic drug particles to the human lungs. The system comprises a spinning top aerosol generator (STAG), aerosol chamber and inhalation control unit. Monodisperse aerosols allow drug particle size effects to be studied...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(03)00032-2
更新日期:2003-03-26 00:00:00
abstract::The forces experienced by the particles inside a twin screw granulator (TSG) are one of the most difficult parameters to measure quantitatively. However, it is possible to perform accurately this measurement through the use of dye containing calibrated microencapsulated sensors (CAMES) whose rupture is directly depend...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2018.12.052
更新日期:2019-03-10 00:00:00
abstract::A sensitive atmospheric pressure chemical ionization liquid chromatographic-mass spectrometric (APCI-LC-MS) assay with positive ion mode has been developed for the determination of nifedipine in human plasma. In this method, nifedipine was extracted from human plasma using diethyl ether with dimethoxanate as the inter...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章,随机对照试验
doi:10.1016/j.ijpharm.2007.03.053
更新日期:2007-08-16 00:00:00
abstract::Experiments were conducted to illustrate some of the challenges associated with measuring dynamic MDI aerosols. Experimental HFA-134a solution MDIs containing 8 or 20% ethanol were measured using the Andersen cascade impactor using three different inlets. It was demonstrated that the size distribution of MDI aerosols ...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2007.11.047
更新日期:2008-05-01 00:00:00
abstract::The aim of our research was to apply experimental design methodology in the development and optimization of drug release methods. Diclofenac sodium (2-[(2,6-dichlorophenyl)amino]benzeneacetic acid monosodium salt) was selected as a model drug and Naklofen retard prolonged release tablets, containing 100 mg of diclofen...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2004.07.041
更新日期:2005-03-03 00:00:00
abstract::In this proof-of-concept study, a methodology is proposed to systematically analyze large data historians of secondary pharmaceutical manufacturing systems using data mining techniques. The objective is to develop an approach enabling to automatically retrieve operation-relevant information that can assist the managem...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2016.03.035
更新日期:2016-05-30 00:00:00
abstract::The aim of this research was to study the gastrointestinal transit and gastric emptying of non-disintegrating solid dosage forms in rats using X-ray imaging. Commercial gelatin minicapsules were filled with barium sulfate and enterically coated using Eudragit S100. The capsules were administered orally to rats followe...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2010.01.001
更新日期:2010-03-30 00:00:00
abstract::High molecular weight polyethylene oxides (PEOs) have recently been proposed as an alternative to hydroxypropylmethylcellulose (HPMC) in controlled release matrix tablets. In this study, we compared the performance of PEO and HPMC polymers when employed in the Geomatrix technology, a versatile, well-known method to ac...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(99)00402-0
更新日期:2000-02-15 00:00:00
abstract::3D-printing is a promising tool to pave the way to the widespread adaption of individualized medicine. Several printing techniques have been investigated and introduced to pharmaceutical research. Until now, only one 3D-printed medicine is approved on the US market. The medicine is manufactured via drop-on-powder depo...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2018.11.048
更新日期:2019-01-30 00:00:00
abstract::Cell replacement therapy is a widely discussed novel concept of medical treatment. The increased knowledge in the stem cell field, particularly pluripotent stem cells, potentially provides powerful tools for this therapeutic concept. A large number of disease characterized by the loss of functional cells are potential...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章,评审
doi:10.1016/j.ijpharm.2009.03.003
更新日期:2009-11-03 00:00:00
abstract::The pharmaceutical industry is strictly regulated, where precise and accurate control of the end product quality is necessary to ensure the effectiveness of the drug products. For such control, the process and raw materials variability ideally need to be fed-forward in real time into an automatic control system so tha...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.09.029
更新日期:2015-11-10 00:00:00
abstract::This work investigated the permeation of primaquine across full-thickness excised human skin from two acrylate transdermal adhesives. Primaquine base was formulated with National Starch 387-2516 and 387-2287 to provide aluminium foil-backed 1-cm diameter patches, each loaded with 10 mg drug. Other patches were prepare...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(99)00215-x
更新日期:1999-10-28 00:00:00
abstract::Capping and lamination are classical industrial issues that can be challenging during the scale up of solid dosage forms. Previous publications showed that changing the unloading conditions (triaxial decompression, loaded ejection) made it possible to mitigate capping. In the present study, a systematic study of the e...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2019.118468
更新日期:2019-08-15 00:00:00
abstract::Non-viral delivery using cationic solid lipid nanoparticles (SLNs) represents a useful strategy to introduce large DNA and RNA molecules to target cells. A careful selection of components and their amounts is critical to improve transfection efficiency. In this work, a selected and optimized formulation of SLNs was us...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2016.11.026
更新日期:2017-01-10 00:00:00
abstract::Gravimetric water sorption experiments were performed to study the crystallization behavior of amorphous spray-dried lactose over a wide range of temperature and humidity conditions. Experiments performed at 25 degrees C between 48 and 60% relative humidity (RH) showed that the onset time to crystallization increased ...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2006.01.012
更新日期:2006-04-26 00:00:00
abstract::The objective of the study is to fabricate multifunctional mesoporous silica nanoparticles for achieving co-delivery of conventional antitumor drug paclitaxel (PTX) and the multidrug resistance reversal agent tetrandrine (TET) expecting to overcome multidrug resistance of MCF-7/ADR cells. The nanoparticles were facile...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.05.010
更新日期:2015-07-15 00:00:00
abstract::9-(2-phosphonyomethoxypropyl)adenine (PMPA) and AMD3100 are highly potent and selective antiretroviral agents. Since PMPA is negatively charged and AMD3100 positively charged at physiological pH, their transepithelial transport and their potential for oral drug delivery is very low. In this study, ion pair formation w...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(99)00150-7
更新日期:1999-09-20 00:00:00
abstract::The aim of this study was to establish a correlation between carrier characteristics and the dispersibility of drug from the blend. The influence of the roughness of a commonly used carrier material, lactose monohydrate, on the adhesion, dose uniformity, and aerodynamic properties of a model drug, terbutaline sulphate...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2004.02.002
更新日期:2004-05-04 00:00:00
abstract::The purpose of present study was to assess the enhancing effect of resveratrol (Res) on the absorption of bestatin and clarify the related molecular mechanism. Res facilitated bestatin absorption by down-regulating both protein and gene levels of multidrug resistance 1 (Mdr1) and Multidrug resistance-associated protei...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2015.09.042
更新日期:2015-11-10 00:00:00
abstract::The purpose of this study was to optimize in vitro experimental conditions for the measurement of Delta(9)-tetrahydrocannabinol (Delta(9)-THC) permeation across human skin using a flow-through diffusion cell system. The drug permeation rates through intact and stripped (stratum corneum (SC) removed) skin were also com...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/s0378-5173(02)00262-4
更新日期:2002-07-25 00:00:00
abstract::The combination therapy of gestodene (GEST) and ethinylestradiol (EE) has shown advanced contraception effect and lower side effect. The present study was designed to develop a weekly sustained release matrix type transdermal patch containing GEST and EE using blends of different polymeric combinations. The multiple-l...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2009.05.017
更新日期:2009-07-30 00:00:00
abstract::The current investigation was carried out to identify appropriate parameters for measuring the in vitro release of tobramycin (TOB) ophthalmic ointments and to evaluate the feasibility of in vitro release testing methods to assess the product performance. Drug release was assessed using USP dissolution apparatus IV an...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2020.119938
更新日期:2020-11-30 00:00:00
abstract::rhPTH1-34 is clinically used for osteoporosis treatment. However, this peptide drug has no oral bioavailability because of proteolysis and low membrane permeability in gastrointestinal gut. This study explored the possibility of absorption enhancement for rhPTH1-34 through the oral delivery of the microemulsion. The m...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2011.08.029
更新日期:2011-11-25 00:00:00
abstract::This study investigates drug-excipient interactions in amorphous solid dispersions (ASDs) of the model basic compound lumefantrine (LMN), with five acidic polymers. X-ray photoelectron spectroscopy (XPS) was used to measure the extent of the protonation of the tertiary amine in LMN by the five acidic polymers. The ext...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2016.06.126
更新日期:2016-12-05 00:00:00
abstract::The low bioavailability of poorly water-soluble drugs is currently one of the major focuses of pharmaceutical research. One strategy currently being investigated to overcome this limitation is to decrease the particle size of the active pharmaceutical ingredients (API). An innovative process for this is spray drying w...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2018.06.069
更新日期:2018-09-05 00:00:00
abstract::Chitosan-based nanoparticles prepared by ionotropic gelation are prone to stability issues. The aim of this work is to chemically modify chitosan by grafting to succinate, phthalate, glutarate and phenylsuccinate moieties and to investigate the suitability of the resulting polymers as covalently-crosslinked nanocarrie...
journal_title:International journal of pharmaceutics
pub_type: 杂志文章
doi:10.1016/j.ijpharm.2017.06.061
更新日期:2017-08-30 00:00:00