Abstract:
:This study evaluated the effect of an intracoronal resin composite pin on Class IV resin composite restorations. A control group of 16 bovine teeth was prepared with standardized conventional Class IV preparations. For an experimental group, 16 similar Class IV preparations were made, with the addition of an intracoronal pin channel prepared with a #330 bur into the dentin. All specimens were restored with Herculite XRV and OptiBond according to the manufacturer's recommendations. After one week, specimens were placed in an Instron Universal Testing Machine and loaded at 90 degrees to the long axis until the restorations failed. Results indicated that the mean fracture load of the Class IV restoration group, with the resin composite pin, was 36% higher than the conventional Class IV group (p = 0.02). An intracoronal resin composite pin may aid the retention and resistance form of complex resin composite restorations.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Roberts HW,Hermesch CB,Charlton DGkeywords:
subject
Has Abstractpub_date
2000-07-01 00:00:00pages
270-3issue
4eissn
0361-7734issn
1559-2863journal_volume
25pub_type
杂志文章abstract::This in vitro study evaluated the amount of fluoride released from fluoride-containing materials over a period of 28 days. Six disk samples (2.06 +/- 0.06 cm2) were prepared of each material and divided at random into seven groups: Group 1: Chelon-Fil; Group 2: Chelon-Silver; Group 3: VariGlass; Group 4: Dyract; Group...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1996-09-01 00:00:00
abstract:PURPOSE:To investigate the influence of ferrule thickness on fracture resistance after mechanical cycling of teeth restored with different intracanal posts. METHODS AND MATERIALS:One hundred twenty bovine incisor teeth were randomized into six study groups, based on the intracanal post used (fiber post or cast post an...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-241-L
更新日期:2019-11-01 00:00:00
abstract::This study evaluated the five-year clinical performance of ceramic inlays and onlays made with two systems: sintered Duceram (Dentsply-Degussa) and pressable IPS Empress (Ivoclar Vivadent). Eighty-six restorations were placed by a single operator in 35 patients with a median age of 33 years. The restorations were ceme...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/12-039-C
更新日期:2013-01-01 00:00:00
abstract::This investigation evaluated the stabilizing effect of glass fiber reinforced posts (FRP) luted with self-adhesive universal cement on the fracture resistance of excessively flared endodontically treated teeth (ETT). Values were compared to teeth with no ferrule, 2 mm ferrule and resin cement for luting with 2 mm ferr...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/05-142
更新日期:2006-11-01 00:00:00
abstract::The purpose of this study was to find out the degree to which eugenol-containing temporary cements or temporary filling materials affected shear bond strength of a dual-cure resin luting cement to acid-etched enamel. For this purpose 56 human caries-free third molars were embedded in acrylic resin and cross sectioned ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1998-03-01 00:00:00
abstract:OBJECTIVES:This study aimed to assess the retention of metal copings luted to uremic teeth with five different luting agents. METHODS:A total of 35 sound natural molars was collected from uremic patients and randomly assigned into five groups (n=7). The teeth were prepared for metal copings using diamond tips and wate...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/12-523-LR2
更新日期:2014-05-01 00:00:00
abstract::This study evaluated the shear-bond strength of 11 luting cements from different material classes to manufactured pre-treated zirconia ceramics (Lava: 97% ZrO2, stabilized with 3% Y2O3). In addition, the influence of the curing method on shear-bond strength was investigated. The cements examined were one zinc-phosphat...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2005-05-01 00:00:00
abstract::The objective of this study was to evaluate the effect of surface sealants and polishing delay time on a nanohybrid resin composite roughness and microhardness. Eighty disc specimens were made with a nanohybrid resin (Esthet-X HD, Dentsply). The specimens were divided into two groups (n=40) according to polishing time...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-048-L
更新日期:2018-07-01 00:00:00
abstract::Coronal fractures of posterior teeth are not rare in clinical practice. Most of the time they constitute a restorational problem for the clinician, since they usually end below the free gingival crest. Two hundred coronal fractures of posterior teeth were examined in this study, with respect to several factors. Some o...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1989-01-01 00:00:00
abstract:OBJECTIVE:The purpose of this study was to evaluate surface finish and gloss of a two-step composite finishing/polishing (F/P) disc system compared with two multistep systems on five composites. METHODS:Seventy-five disc-shaped composite specimens (D=10.0 mm, 2 mm thick, n=15 per composite) were made of microfill (Dur...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-162-L
更新日期:2011-03-01 00:00:00
abstract::This study evaluated in vitro the necessity of retention grooves in approximal boxes in class 2 preparations with faciolingually wide occlusal extensions (occlusal isthmus width 1.8 mm). Thirty-six class 2 mesio-occlusal cavities were prepared in sound human maxillary premolar teeth and divided into three groups of 12...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1993-03-01 00:00:00
abstract:OBJECTIVES:People increasingly desire tooth whitening. Considering the wide range of whitening products on the market, this study evaluated the efficacy of whitening toothpastes and mouth rinses compared with the 10% carbamide peroxide (CP) whitening gel. METHODS:We obtained 120 cylindrical specimens from bovine teeth...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-360-L
更新日期:2013-01-01 00:00:00
abstract:OBJECTIVES:To evaluate the effect of endodontic access on the failure load resistance of both adhesively and conventionally luted, full-contour monolithic yttria-stabilized zirconium dioxide (Y-TZP) and adhesively luted lithium disilicate (LD) crowns cemented on prepared teeth. METHODS AND MATERIALS:Seventy-two human ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-231-L
更新日期:2020-05-01 00:00:00
abstract::The objective of this paper is to review the literature concerning factors affecting adhesion to mineralized tissues. Factors related to the physicochemical structure of the adherents and to the inherent properties of composite restorative materials, along with the postulated bonding mechanisms of current adhesive sys...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:
更新日期:1992-01-01 00:00:00
abstract::In vitro studies to assess bond strength between resins and ceramics have used surfaces that have been ground flat to ensure standardization; however, in patients, ceramic surfaces are irregular. The effect of a polished and unpolished ceramic on bond strength needs to be investigated. Sixty ceramic specimens (20×5×2 ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-009-L
更新日期:2011-09-01 00:00:00
abstract::This study evaluated the biocompatibility of contemporary bulk-fill resin-based composites (RBCs) including PRG (pre-reacted glass ionomer) materials based on the International Organization for Standardization 10993. In addition, the effect of composite thickness on cytotoxicity was also assessed. Two standard composi...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-059-L
更新日期:2015-11-01 00:00:00
abstract::This study evaluated the degree of conversion (%DC) of luting agents around ceramic inlays placed in deep natural cavities. Thirty-six cylindrical Class I cavities (diameter = 4 mm, depth = 4 mm) were prepared in freshly extracted human teeth and randomly divided according to the luting materials used for luting CAD/C...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-012-L
更新日期:2010-09-01 00:00:00
abstract:OBJECTIVE:The aim of this study was to present a case report of a patient affected by amelogenesis imperfecta showing a possible minimal and conservative adhesive treatment approach. CLINICAL PROCEDURE:A treatment philosophy of amelogenesis imperfecta is illustrated by means of a case report of a 14-year-old boy who c...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-437-S
更新日期:2013-05-01 00:00:00
abstract::This study determined the influence of light curing protocols and matrix type on the margin quality and marginal seal of Class II resin-based composite restorations. In extracted human molars, box-shaped MOD cavities with 1 mm wide interproximal bevels were prepared with cervical margins located at least 1 mm coronal ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/04-194
更新日期:2006-01-01 00:00:00
abstract::This article reports the case of a patient with bilateral hypodontia of the maxillary lateral incisors who was dissatisfied with the outcome of initial orthodontic treatment, highlighting the importance of a multidisciplinary interaction among Restorative Dentistry, Orthodontics, and Implantology to achieve satisfacto...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-167-T
更新日期:2012-09-01 00:00:00
abstract::This study evaluated the effect of polishing after one-day storage in water on the gap formation around a Class V restoration completely bordered by enamel (coronal cavity) using one resin-modified glass ionomer, one compomer and one conventional glass ionomer as a control. The study also examined gap formation of the...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2002-01-01 00:00:00
abstract::This in-vitro study compared the resistance of extensive amalgam restorations retained by either four Regular TMS Link Plus pins, four amalgapins, Amalgambond Plus, Amalgambond Plus with HPA, Scotchbond Multi-Purpose Plus, PQ Amalgam, Panavia F 2.0, All-Bond 2 or Resinomer. Ninety caries-free third molars were embedde...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/08-5
更新日期:2008-11-01 00:00:00
abstract:OBJECTIVES:Published transmission electron microscopy analysis of in vitro resin-dentin bonds shows that, after 44 months, almost 70% of collagen fibrils from the hybrid layer disappear. Matrix metalloproteinases (MMPs) play an important role in that process and are thought to be the main factor responsible for the sol...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/12-425-L
更新日期:2014-03-01 00:00:00
abstract::Marginal adaptation to cylindrical dentin preparations of five commercially available dental composites--Charisma, Estelite, Herculite, Pertac, and Silux Plus--and seven experimental dental composites containing prepolymerized filler was evaluated by measurement of the wall-to-wall polymerization contraction gaps. The...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1997-11-01 00:00:00
abstract:OBJECTIVES:This study investigated cuspal deformation in teeth restored with different types of adhesive materials with and without a base. METHODS:Mesio-occluso-distal slot cavities of moderately large dimension were prepared on extracted maxillary premolars (n=24). Teeth were assigned to one of four groups and resto...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-331-L
更新日期:2016-03-01 00:00:00
abstract::This study evaluated the regional tensile bond strength of a dual-cure resin composite core material to root canal dentin using photo and dual-cure adhesives and different modes of polymerization. Nineteen extracted premolars were decoronated and their root canals prepared to a depth of 8 mm and a width of 1.4 mm usin...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2003-09-01 00:00:00
abstract::The bulk-filling of deep, wide dental cavities is faster and easier than traditional incremental restoration. However, the extent of cure at the bottom of the restoration should be carefully examined in combination with the polymerization contraction and gap formation that occur during the restorative procedure. The a...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/13-324-L
更新日期:2015-03-01 00:00:00
abstract::This study investigated the influence of curing lights and modes on the cross-link density of dental composites. Four LED/halogen curing lights (LED-Elipar Freelight [FL], 3M-ESPE and GC e-light [EL], GC; high intensity halogen-Elipar Trilight [TL], 3M-ESPE; very high intensity halogen-Astralis 10 [AS], Ivoclar Vivade...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2004-07-01 00:00:00
abstract:OBJECTIVES:This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems. METHODS:Forty bovine incisors were randomly assigned to five differe...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-035-L
更新日期:2012-01-01 00:00:00
abstract::For many years, operative dentistry has been using regenerative approaches to treat dental disease. The use of calcium hydroxide to stimulate reparative or reactionary dentin is clearly an example of such a therapeutic strategy. The advent of tissue engineering is allowing dentistry to move forward in the use of regen...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:10.2341/06-000
更新日期:2006-11-01 00:00:00